Download or read book Elastic Plastic and Yield Design of Reinforced Structures written by Patrick De Buhan and published by Elsevier. This book was released on 2017-07-21 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastic, Plastic and Yield Design of Reinforced Structures presents a whole set of new results which have been published by the authors over the last 30 years in the field of continuum solid mechanics applied to the analysis and design of reinforced civil engineering structures. The focus is on the development and application of up-scaling/homogenization methods in the design of such composite structures, with a special emphasis on the plastic behavior and ultimate strength of materials. The specificity of the book is highlighted by at least two completely innovative concepts which lie at the very heart of the book's originality: the elaboration of a fully comprehensive homogenization-based method for the design of reinforced structures (and not only materials), through the study of macroscopic behavior, and the development of a multiphase model for materials reinforced by linear inclusions, which considerably extends the range of applicability of the classical homogenization procedure. - Sums up almost thirty years of original research in the field of mechanics applied to the analysis and design of reinforced civil engineering structures - Focuses on the application of upscaling/homogenization methods to the design of civil engineering structures - Highlights the elaboration of a fully comprehensive homogenization-based method for the design of reinforced structures (and not only materials), through the concept of macroscopic behavior - Features development of a multiphase model for materials reinforced by linear inclusions, which considerably extends the range of applicability of the classical homogenization procedure.

Download or read book Inelastic Analysis of Structures written by Milan Jirasek and published by John Wiley & Sons. This book was released on 2001-12-21 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hat ein Werkstoff seine Elastizitatsgrenze erreicht, so verhalt er sich inelastisch. Ingenieure und Designer mussen wissen, mit welchen Eigenschaften dann zu rechnen ist. Dieser Band vermittelt Ihnen den aktuellen Wissensstand auf dem Gebiet des plastischen Verhaltens und der plastischen Zug-Spannungs-Beziehungen. Behandelt werden in erster Linie Baustoffe, vor allem Stahl, aber auch Beton und Boden. Eine ausgewogene Mischung aus qualitativer Diskussion und mathematischer Theorie! (05/00)

Download or read book Plastic Design of Frames 1 Fundamentals written by J. Baker and published by Cambridge University Press. This book was released on 1969-06-02 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: When this volume was first published, plastic theory was the most modern method of structural analysis, and it made possible the direct design of steel frames in a way not available with only elastic methods. It is now recognized that this theory is also fundamental to structural design in materials such as reinforced concrete and aluminium. This is the first volume of a two-volume work by Professors Baker and Heyman that expounds and illustrates the methods of plastic design. Volume 1 gives the elements of the theory and covers the needs of most undergraduates and designers. A special feature of this work is the large number of exercises (140 in all) with answers. Volume 2 deals with advanced topics of theoretical analysis and practical design. The examples and the methods presented herein are extremely valuable to the engineer. The quality of the writing makes Professors Baker and Heyman's book a pleasure to read. Lord Baker (Sir John Fleetwood Baker, 1901-1985) was Professor of Mechanical Sciences and Head of the Department of Engineering at the University of Cambridge from 1943 to 1968. He was a Fellow of the Royal Society. Baker's pioneering research led to the development of the plastic theory of design, originally used for steel frames but now recognized as being valid for many structural materials, such as aluminium and reinforced concrete. Additionally, Baker was responsible for many curriculum innovations at the university and was the author of The Steel Skeleton, a two-volume work. Jacques Heyman is the former Head of the Department of Engineering at the University of Cambridge and the author of ten books, including The Stone Skeleton, Elements of the Theory of Structures, Structural Analysis: A Historical Approach, Elements of Stress Analysis, and the two-volume set Plastic Design of Frames: Volume 1. Fundamentals with Lord Baker and Volume 2. Applications. He is a Fellow of the Society of Antiquaries, the Institution of Civil Engineers, and the Royal Academy of Engineering. He acted as a consulting engineer for a number of English cathedrals and as a member of the Architectural Advisory Panel for Westminster Abbey and of the Cathedrals Fabric Commission for England, and he has served on many British standards committees. The Stone Skeleton won the Choice Outstanding Academic Books Award in 1996.

Download or read book Plastic Methods for Steel and Concrete Structures written by Stuart S. J. Moy and published by John Wiley & Sons. This book was released on 1981 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shakedown of Elastic Plastic Structures written by J.A. König and published by Elsevier. This book was released on 2012-12-02 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the author has collected existing information on the analysis of elastic-plastic structures subjected to variable repeated loads and to variable temperature fields. He presents the foundations of the theory and its applications to the shakedown analysis of structures of various types and to computational algorithms.The book provides useful and interesting material for students of civil and mechanical engineering, practising engineers with a good mathematical background and also scientists concerned with the analysis of inelastic structures.

Download or read book Design of Concrete Structures with Stress Fields written by Aurello Muttoni and published by Springer Science & Business Media. This book was released on 1996-12-01 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: 17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models.

Download or read book Plastic Theory of Structures written by Michael R. Horne and published by Elsevier. This book was released on 2014-05-09 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Theory of Structures focuses on the use of plastic theory in design and shows how code requirements are related to theoretical considerations. More specifically, the effect of axial load and shear force on plastic moment capacity is examined, along with biaxial bending, frame and local instability, and the use of partial load factors. The significance of repeated loading in plastic design is also highlighted. Comprised of six chapters, this book begins with an overview of plastic failure and the behavior beyond the elastic limit (with particular emphasis on the failure loads) of structures in which resistance to bending action is the primary means by which the loads are supported. Attention is paid to how the collapse load factor of a given structure may be derived, that is, the structure has been analyzed in relation to plastic collapse. The reader is then introduced to methods of plastic analysis; plastic moments under shear force and axial load; and minimum weight design. The book also considers variable repeated loading before concluding with a chapter on stability and the influence of various structural parameters and appropriate methods for the estimation of failure loads. This monograph will be of interest to civil and structural engineers.

Download or read book Plastic Analysis of Structures written by Philip Gibson Hodge and published by . This book was released on 1981 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plasticity in Reinforced Concrete written by Wai-Fah Chen and published by J. Ross Publishing. This book was released on 2007 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: J. Ross Publishing Classics are world-renowned texts and monographs written bt preeminent scholars. These books are available to students, researchers, professionals, and libararies.

Download or read book Design of Underground Structures written by Zhen-Dong Cui and published by Springer. This book was released on 2019-08-09 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general review of the literature on underground structures, combined with new specifications, engineering case studies, and numerical simulations based on the authors’ research. It focuses on the basic concepts, theories, and methods of the design of underground structures. After an introduction, it covers various topics, such as elastic foundation beam theory and numerical analysis methods for underground structures, as well as the design of shallow underground structures, diaphragm wall structures, shield tunnel structures, caisson structures, immersed tube structures, and integral tunnel structures. It also includes tables for calculating elastic foundation beam. This book is intended for senior undergraduate and graduate students majoring in urban underground space engineering, building engineering, highway engineering, railway engineering, bridge and tunnel engineering, water conservancy and hydropower engineering.

Download or read book Advanced Topics in Materials Science and Engineering written by J.L. Morán-López and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the First Mexico-U.S.A. Symposium on Materials Sciences and Engineering held in Ixtapa, Guerrero, Mexico, during Septem ber 24-27, 1991. The conference was conceived with the primary objective of increas ing the close ties between scientists and engineers in both Mexico and the U.S. with an interest in materials. The conference itself would have not taken place without the drive, determination and technical knowledge of John K. Tien of the University of Texas at Austin and of Francisco Mejia Lira of the Universidad de San Luis Potosi. This book is dedicated to their memory. The event brought together materials scientists and engineers with interests in a broad range of subjects in the processing, characterization and properties of advanced materials. Several papers were dedicated to structural materials ranging from ferrous alloys to intemetallics, ceramics and composites. The presentation covered properties, processing, and factors that control their use, such as fatigue and corrosion. Other materials and properties were also explored by U.S. and Mexican participants. Sev eral papers dealt with the characterization and properties of magnetics, optical and superconductor materials, nanostructured materials, as well as with computational and theoretical aspects likely to impact future materials research and development.

Download or read book Plasticity Limit Analysis Stability And Structural Design An Academic Life Journey From Theory To Practice written by Wai-fah Chen and published by World Scientific. This book was released on 2021-01-22 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a personal anthology of the author's utmost academic works and accomplishments with his former students and colleagues intended as an enduring record for the engineering community for many years to come.The author's forty-year professional career and academic life journey is first briefly sketched in Chapter 1 and more details are elaborated in three chapters that follow: Chapter 2: The first ten years at Lehigh — beginning to show; Chapter 3: Twenty=three years at Purdue — the highly productive years; and Chapter 4: seven years at UH — the pursuit of excellence. The author's specific academic contributions are documented in the following three chapters: Chapter 5: 23 academic bulletins are selected to highlight his 10 major research areas; Chapter 6: 23 Academic masterpiece books are listed along with their respective peer review comments; and Chapter 7: academic publications include journal articles, conference proceedings and symposiums, and lectures and keynotes. The book ends with the listing of all the author's 55 doctoral students' dissertation titles in Chapter 8.In 1975 at Lehigh, the author published a milestone treatise on Limit Analysis and Soil Plasticity. In 1982 at Purdue, he published another pioneering work on Plasticity in Reinforced Concrete.In September 1999, the author was recruited by UH to take the Deanship of the College of Engineering to accomplish the noble mission: to build the College to become one of the top 50 engineering schools by strengthening the faculty, improving the facilities, and increasing the enrollment. Over his seven years at UH, a lot of progress was made in all these three areas — the research program expanded, facilities improved, and enrollment increased.

Download or read book Sustainable Masonry written by Thierry Ciblac and published by John Wiley & Sons. This book was released on 2014-07-22 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the impact of sustainable masonry on the environment, touting the many benefits of utilizing local and/or low embodied energy materials in the construction of sustainable buildings.

Download or read book Limit State Design of Reinforced Concrete Structures written by Derrick Beckett and published by John Wiley & Sons. This book was released on 1975 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Engineering written by P. Bisch and published by CRC Press. This book was released on 1998-01-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text details the proceedings of the 11th European Conference on Earthquake Engineering. CD-ROM contains full text of the 650 papers in printed form. This would have been 6 volumes of 1000 pages each. Topics covered: are: Engineering seismology; Experimental aspects for soils, rocks and construction material; Computational aspects for materials, structures and soil-structure interaction; Civil engineering projects; Active and passive isolation; Industrial facilities, lifelines and equipment; Vulnerability, seismic risk and strengthening; Site effects and spatial variability of seismic motions; Reliability analyses and probabilistic aspects; Design criteria, codees and standards; Eurocode 8 and national applications; Seismic risk in the Mediterranean basin; Post earthquake investigations;

Download or read book Structural Concrete written by C. B. Wilby and published by Elsevier. This book was released on 2013-10-22 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Concrete discusses the design and analysis of reinforced and prestressed concrete structural components and structures. Each of the eight chapters of the book tackles a specific area of concern in structural concrete. The text first deals with the serviceability and safety, and then proceeds to the properties of materials and mix designs. The next two chapters cover reinforced concrete beams and slabs. Chapter 5 discusses column and walls, while Chapter 6 tackles reinforced concrete frames and continuous beams and slabs. The next chapter discusses design structures, while the last chapter covers prestressed concrete. The text will be of great use to undergraduate students of civil and structural engineering. Professionals whose work involves concrete technology will also find the book useful.

Download or read book 12th PhD Symposium in Prague Czech Rep written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2018-08-01 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: