Download or read book A Teaching Essay on Residual Stresses and Eigenstrains written by Alexander M. Korsunsky and published by Butterworth-Heinemann. This book was released on 2017-06-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are an important subject in materials science and engineering that has implications across disciplines, from quantum dots to human teeth, from aeroengines to automotive surface finishing. Although a number of monographs exist, no resource is available in the form of a book to serve as a good basis for teaching the fundamentals. A Teaching Essay on Residual Stresses and Eigenstrains introduces eigenstrain methods as a powerful unified approach to residual stress modeling, measurement, and management. Starting with simple residual stress states, the key relationships are elucidated between deformation processes, inelastic strains (eigenstrains) these may introduce, and the resulting residual stress states. This book is written not only for the materials scientist, mechanical engineer, and student seeking to appreciate the origins of residual stress, but also for the more mature researcher and industrial engineer looking to improve their understanding of the eigenstrain approach to describing residual stress. - Provides a unified basis for understanding the fundamentals of residual stress origins and consequences - Introduces a classification of the most important residual stress states and their efficient description, as well as discussing measurement approaches, their limitations, and uses - Approaches the nature and application of eigenstrain methods in a systematic way to describe residual stress fields

Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.

Download or read book Computational Mechanics written by Zhenhan Yao and published by Springer Science & Business Media. This book was released on 2009-03-24 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Mechanics is the proceedings of the International Symposium on Computational Mechanics, ISCM 2007. This conference is the first of a series created by a group of prominent scholars from the Mainland of China, Hong Kong, Taiwan, and overseas Chinese, who are very active in the field. The book includes 22 full papers of plenary and semi-plenary lectures and approximately 150 one-page summaries.

Download or read book Interfacial Mechanics written by Jane Wang and published by CRC Press. This book was released on 2019-12-06 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the characteristics of material contact and lubrication at tribological interfaces is of great importance to engineering researchers and machine designers. Traditionally, contact and lubrication are separately studied due to technical difficulties, although they often coexist in reality and they are actually on the same physical ground. Fast research advancements in recent years have enabled the development and application of unified models and numerical approaches to simulate contact and lubrication, merging their studies into the domain of Interfacial Mechanics. This book provides updated information based on recent research progresses in related areas, which includes new concepts, theories, methods, and results for contact and lubrication problems involving elastic or inelastic materials, homogeneous or inhomogeneous contacting bodies, using stochastic or deterministic models for dealing with rough surfaces. It also contains unified models and numerical methods for mixed lubrication studies, analyses of interfacial frictional and thermal behaviors, as well as theories for studying the effects of multiple fields on interfacial characteristics. The book intends to reflect the recent trends of research by focusing on numerical simulation and problem solving techniques for practical interfaces of engineered surfaces and materials. This book is written primarily for graduate and senior undergraduate students, engineers, and researchers in the fields of tribology, lubrication, surface engineering, materials science and engineering, and mechanical engineering.

Download or read book Introduction To Micromechanics And Nanomechanics 2nd Edition written by Shaofan Li and published by World Scientific Publishing Company. This book was released on 2017-12-05 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic treatise on micromechanics and nanomechanics, which encompasses many important research and development areas such as composite materials and homogenizations, mechanics of quantum dots, multiscale analysis and mechanics, defect mechanics of solids including fracture and dislocation mechanics, etc.In this second edition, some previous chapters are revised, and some new chapters added — crystal plasticity, multiscale crystal defect dynamics, quantum force and stress, micromechanics of metamaterials, and micromorphic theory.The book serves primarily as a graduate textbook and intended as a reference book for the next generation of scientists and engineers. It also has a unique pedagogical style that is specially suitable for self-study and self-learning for many researchers and professionals who do not have time attending classes and lectures.

Download or read book Fracture Mechanics written by Dietmar Gross and published by Springer Science & Business Media. This book was released on 2007-05-23 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: - self-contained and well illustrated - complete and comprehensive derivation of mechanical/mathematical results with enphasis on issues of practical importance - combines classical subjects of fracture mechanics with modern topics such as microheterogeneous materials, piezoelectric materials, thin films, damage - mechanically and mathematically clear and complete derivations of results

Download or read book The Inclusion Based Boundary Element Method iBEM written by Huiming Yin and published by Academic Press. This book was released on 2022-04-14 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Inclusion-Based Boundary Element Method (iBEM) is an innovative numerical method for the study of the multi-physical and mechanical behaviour of composite materials, linear elasticity, potential flow or Stokes fluid dynamics. It combines the basic ideas of Eshelby's Equivalent Inclusion Method (EIM) in classic micromechanics and the Boundary Element Method (BEM) in computational mechanics. The book starts by explaining the application and extension of the EIM from elastic problems to the Stokes fluid, and potential flow problems for a multiphase material system in the infinite domain. It also shows how switching the Green's function for infinite domain solutions to semi-infinite domain solutions allows this method to solve semi-infinite domain problems. A thorough examination of particle-particle interaction and particle-boundary interaction exposes the limitation of the classic micromechanics based on Eshelby's solution for one particle embedded in the infinite domain, and demonstrates the necessity to consider the particle interactions and boundary effects for a composite containing a fairly high volume fraction of the dispersed materials. Starting by covering the fundamentals required to understand the method and going on to describe everything needed to apply it to a variety of practical contexts, this book is the ideal guide to this innovative numerical method for students, researchers, and engineers. - The multidisciplinary approach used in this book, drawing on computational methods as well as micromechanics, helps to produce a computationally efficient solution to the multi-inclusion problem - The iBEM can serve as an efficient tool to conduct virtual experiments for composite materials with various geometry and boundary or loading conditions - Includes case studies with detailed examples of numerical implementation

Download or read book Computer Simulations of Dislocations written by Vasily Bulatov and published by Oxford University Press. This book was released on 2006-11-02 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a variety of methods for computer simulations of crystal defects in the form of "numerical recipes", complete with computer codes and analysis tools. By working through numerous case studies and problems, this book provides a useful starter kit for further method development in the computational materials sciences.

Download or read book Micromechanics of Defects in Solids written by T. Mura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book stems from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micromechanics was a rather unfamiliar subject. Although I repeated the course every year, I was never convinced that my notes have quite developed into a final manuscript because new topics emerged constantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Japanese, entitled Micromechanics, published by Baifu-kan, Tokyo, in 1975. It received an extremely favorable response from students and re searchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materi als: plasticity, fracture and fatigue, constitutive equations, composite materi als, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.

Download or read book Fatigue and Fracture Mechanics written by Walter G. Reuter and published by ASTM International. This book was released on 2002-12-31 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the whole of Asia and the Pacific region, this text provides both an analytic overview and specific data for each of the 60 countries. Introductory chapters cover regional issues, including: a regional review with the year's trends, developments and key events' analysis of the threat of terrorism in the region; the effects of deflation on the economy; the water crisis and its impact on the poor; and the successes and failures of micro-credit in the region.

Download or read book Modern Theory of Anisotropic Elasticity and Applications written by Julian J. Wu and published by SIAM. This book was released on 1991-01-01 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of 26 original papers, some of them substantially revised after the workshop, discuss anisotropic elasticity and its applications in solid mechanics and applied mathematics. Considering elastostatics, elastodynamics, and constitutive relations, they discuss such topics as Green's functio

Download or read book Mechanics and Model Based Control of Smart Materials and Structures written by Hans Irschik and published by Springer Science & Business Media. This book was released on 2009-09-30 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics and model-based control are both rapidly expanding scientific fields and fundamental disciplines of mechatronics, sharing demanding mathematical and system-theoretic formulations and methods. The papers in this volume deal with smart materials, which allow the design and implementation of new types of actuator/sensor fields and networks. Main topics treated are fundamental studies on laminated, composite and functionally graded materials, thermal and piezoelectric actuation, active and passive damping, as well as vibrations and waves in smart structures. The book is based on the 1st Japanese-Austrian Workshop which took place in Linz in Fall 2008.

Download or read book Practical Multiscaling written by Jacob Fish and published by John Wiley & Sons. This book was released on 2013-09-03 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Multiscaling covers fundamental modelling techniques aimed at bridging diverse temporal and spatial scales ranging from the atomic level to a full-scale product level. It focuses on practical multiscale methods that account for fine-scale (material) details but do not require their precise resolution. The text material evolved from over 20 years of teaching experience at Rensselaer and Columbia University, as well as from practical experience gained in the application of multiscale software. This book comprehensively covers theory and implementation, providing a detailed exposition of the state-of-the-art multiscale theories and their insertion into conventional (single-scale) finite element code architecture. The robustness and design aspects of multiscale methods are also emphasised, which is accomplished via four building blocks: upscaling of information, systematic reduction of information, characterization of information utilizing experimental data, and material optimization. To ensure the reader gains hands-on experience, a companion website hosting a lite version of the multiscale design software (MDS-Lite) is available. Key features: Combines fundamental theory and practical methods of multiscale modelling Covers the state-of-the-art multiscale theories and examines their practical usability in design Covers applications of multiscale methods Accompanied by a continuously updated website hosting the multiscale design software Illustrated with colour images Practical Multiscaling is an ideal textbook for graduate students studying multiscale science and engineering. It is also a must-have reference for government laboratories, researchers and practitioners in civil, aerospace, pharmaceutical, electronics, and automotive industries, and commercial software vendors.

Download or read book Fatigue and Fracture Mechanics written by Tina Louise Panontin and published by ASTM International. This book was released on 1999 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Structural Engineering Compendium I written by Journal Editors and published by Elsevier. This book was released on 2002-02-06 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium is made up of a selection of the best and most representative papers from a group of Elsevier's structural engineering journals. Selections were made by the journal's editorial teams. The papers appeared in the following journals during 2000: Journal of Constructional Steel Research P.J. Dowling, J.E. Harding, R. Bjorhovde Thin Walled Structures J. Loughlan, K.P. Chong Engineering Structures P.L. Gould Computers and Structures K.J. Bathe, B.H.V. Topping Construction and Building Materials M.C. Forde Journal of Wind Engineering & Industrial Areodynamics N.P. Jones Marine Structures P.A. Frieze, A. Mansour, T. Yao Each paper appears in the same format as it was published in the journal; citations should be made using the original journal publication details. It is intended that this compendium will be the first in a series of such collections. A compendium has also been published in the area of geotechnical engineering.

Download or read book Developments in Theoretical and Applied Mechanics written by W. A. Shaw and published by Elsevier. This book was released on 2013-10-22 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Theoretical and Applied Mechanics, Volume 3 presents papers on the proceedings of the Third Southeastern Conference on Theoretical and Applied Mechanics held in Columbia, S. Carolina on March 31-April 1, 1966. The book covers papers in the areas of continuum mechanics, elasticity, plates and shells, applied mechanics, experimental mechanics, wave propagation, dynamics, vibrations, and fluid mechanics. Physical chemists and mechanical engineers will find the book invaluable.

Download or read book Elastic Strain Fields and Dislocation Mobility written by V.L. Indenbom and published by Elsevier. This book was released on 2012-12-02 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume aims to provide a thorough treatment of the phenomena of elastic anisostropy and a discussion on dislocation mobilities. The book presents a wide treatment of these topics, and includes descriptions of detailed theoretical models to describe dislocations and cracks, and moving dislocations. An overview is given of the physical behaviour resulting from dislocation mobility in materials, such as glide and climb, interactions with point defects and the behaviour of dislocations under radiation such as creep and swelling.