Download or read book Efficient Liquid Atomization Using Gas Flows and Novel Micro machining Techniques written by Herman Emil Snyder and published by . This book was released on 1997 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development of Micro diesel Injector Nozzles Via Mems Technology and Effects on Spray Characteristics written by Seunghyun Baik and published by . This book was released on 2001 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Engineering for Gas Turbines and Power written by and published by . This book was released on 2003 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2001 Fall Technical Conference of the ASME Internal Combustion Engine Division Diesel combustion and emissions fuel injection and sprays written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2001 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomization and Sprays written by Arthur Lefebvre and published by CRC Press. This book was released on 1988-12-01 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomization and Sprays examines the atomization of liquids and characteristics of sprays. It explains the physical processes of atomization as well as guidelines for designing atomizers. In addition, it demonstrates how the importance of the size and velocity of a particle contributes to improved spray characterization. Coverage includes general co
Download or read book Micromachining Using Electrochemical Discharge Phenomenon written by Rolf Wuthrich and published by William Andrew. This book was released on 2014-11-08 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-machining is an advanced manufacturing technique of growing importance, and adoption of micro-machining using electrochemical discharges (Micro-ECDM) has increased steadily in recent years. Among new developments is the interest of industry in Micro-ECDM. However, the potential of the technology is not being fully utilized and there is no comprehensive reference book available today covering it. Micromachining Using Electrochemical Discharge Phenomenon, Second Edition fills this gap. It is unique in its detailed coverage of all aspects of the Micro-ECDM process, as well as Spark Assisted Chemical Engraving (SACE). As such, it covers technologies such as chemical etching, micro-drilling, and other material removal mechanisms, high aspect ratio machining, design and construction of the machining apparatus, and a wide range of applications. The new edition compares Micro-ECDM and SACE with other micromachining technologies such as laser machining and traditional EDM. ECDM is used for machining of electrically non-conductive materials. Micro-ECDM/SACE is mainly applied to glass and the book focuses on glass, but the authors also present new results on other materials such as ceramics. In addition, techniques to modify material properties for the machining process are explained. The authors discuss machining strategies including the latest developments in micro-texturing of glass micro-channels and reports on developments in controlling and analysis aspects of machining. This book is a unique reference for engineers and industrial researchers involved in development, design and use of micromachining, chemical micro-drilling or chemical engraving techniques and equipment. Only all-encompassing reference coving Micro-ECDM and SACE available on the market Covers a wide range of applications, including applications in the MEMS industry and the Medical Devices and Medical Diagnostics industries New edition includes expanded sections on comparing Micro-ECDM/SACE with other micromachining technologies
Download or read book Microreactors for Gas Liquid Reactions written by Kristin Hecht and published by Western Engineering, Inc.. This book was released on 2014-01-01 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The widespread adoption of microreactors has been hindered by a lack of knowledge regarding rules and parameters needed for their design. This dissertation deals with the investigation of interfacial area and liquid mass transport in microreactors for gas/liquid reactions. Observations of a reduction in conversion occurring when changing from a glass laboratory device to a stainless steel process device motivated investigations into the effect of material and surface properties on the gas/liquid flow and reaction. This work takes a look inside the machined microstructures produced at the Institute for Micro Process Engineering of the Karlsruhe Institute of Technology and investigates the nature of the solid surfaces resulting from the machining process—the surface roughness and the contact angle of the resulting surface. The effect of wettability on gas/liquid flow in microreactors has been investigated in capillaries of various materials. The absorption of carbon dioxide into aqueous solutions of sodium hydroxide has been used to investigate gas/liquid flow and reaction in capillaries and in a microstructured falling film reactor. Under certain limiting assumptions depending upon the exact rates of reaction and transport, values of the interfacial area and liquid mass transport coefficient can be derived from measurements of reaction. This dissertation contributes a small step towards a better understanding of how measurements of the interfacial area and mass transfer coefficient can be performed, demonstrates why the effect of material wettability cannot be ignored, and provides a stronger basis for further work in the development of general correlations describing microstructured gas/liquid reactors.
Download or read book Manufacturing Techniques for Microfabrication and Nanotechnology written by Marc J. Madou and published by CRC Press. This book was released on 2011-06-13 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for science and engineering students, this text focuses on emerging trends in processes for fabricating MEMS and NEMS devices. The book reviews different forms of lithography, subtractive material removal processes, and additive technologies. Both top-down and bottom-up fabrication processes are exhaustively covered and the merits of the different approaches are compared. Students can use this color volume as a guide to help establish the appropriate fabrication technique for any type of micro- or nano-machine.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 1996 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process and Chemical Engineering written by and published by . This book was released on 2002 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Atomization and Sprays written by Nasser Ashgriz and published by Springer Science & Business Media. This book was released on 2011-02-18 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atomization and sprays are used in a wide range of industries: mechanical, chemical, aerospace, and civil engineering; material science and metallurgy; food; pharmaceutical, forestry, environmental protection; medicine; agriculture; meteorology and others. Some specific applications are spray combustion in furnaces, gas turbines and rockets, spray drying and cooling, air conditioning, powdered metallurgy, spray painting and coating, inhalation therapy, and many others. The Handbook of Atomization and Sprays will bring together the fundamental and applied material from all fields into one comprehensive source. Subject areas included in the reference are droplets, theoretical models and numerical simulations, phase Doppler particle analysis, applications, devices and more.
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2018-09-03 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete Reference Covering the Latest Technology in Metal Cutting Tools, Processes, and Equipment Metal Cutting Theory and Practice, Third Edition shapes the future of material removal in new and lasting ways. Centered on metallic work materials and traditional chip-forming cutting methods, the book provides a physical understanding of conventional and high-speed machining processes applied to metallic work pieces, and serves as a basis for effective process design and troubleshooting. This latest edition of a well-known reference highlights recent developments, covers the latest research results, and reflects current areas of emphasis in industrial practice. Based on the authors’ extensive automotive production experience, it covers several structural changes, and includes an extensive review of computer aided engineering (CAE) methods for process analysis and design. Providing updated material throughout, it offers insight and understanding to engineers looking to design, operate, troubleshoot, and improve high quality, cost effective metal cutting operations. The book contains extensive up-to-date references to both scientific and trade literature, and provides a description of error mapping and compensation strategies for CNC machines based on recently issued international standards, and includes chapters on cutting fluids and gear machining. The authors also offer updated information on tooling grades and practices for machining compacted graphite iron, nickel alloys, and other hard-to-machine materials, as well as a full description of minimum quantity lubrication systems, tooling, and processing practices. In addition, updated topics include machine tool types and structures, cutting tool materials and coatings, cutting mechanics and temperatures, process simulation and analysis, and tool wear from both chemical and mechanical viewpoints. Comprised of 17 chapters, this detailed study: Describes the common machining operations used to produce specific shapes or surface characteristics Contains conventional and advanced cutting tool technologies Explains the properties and characteristics of tools which influence tool design or selection Clarifies the physical mechanisms which lead to tool failure and identifies general strategies for reducing failure rates and increasing tool life Includes common machinability criteria, tests, and indices Breaks down the economics of machining operations Offers an overview of the engineering aspects of MQL machining Summarizes gear machining and finishing methods for common gear types, and more Metal Cutting Theory and Practice, Third Edition emphasizes the physical understanding and analysis for robust process design, troubleshooting, and improvement, and aids manufacturing engineering professionals, and engineering students in manufacturing engineering and machining processes programs.
Download or read book The Engineering Index Annual written by and published by . This book was released on 1993 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now. Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals). The result is a formidable reference source for those in all aspects of the metal powder industry. Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth Expert Russian team of authors, all very experienced English translation and update of book previously published in Russian
Download or read book Comprehensive Materials Finishing written by M.S.J. Hashmi and published by Elsevier. This book was released on 2016-08-29 with total page 1467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finish Manufacturing Processes are those final stage processing techniques which are deployed to bring a product to readiness for marketing and putting in service. Over recent decades a number of finish manufacturing processes have been newly developed by researchers and technologists. Many of these developments have been reported and illustrated in existing literature in a piecemeal manner or in relation only to specific applications. For the first time, Comprehensive Materials Finishing, Three Volume Set integrates a wide body of this knowledge and understanding into a single, comprehensive work. Containing a mixture of review articles, case studies and research findings resulting from R & D activities in industrial and academic domains, this reference work focuses on how some finish manufacturing processes are advantageous for a broad range of technologies. These include applicability, energy and technological costs as well as practicability of implementation. The work covers a wide range of materials such as ferrous, non-ferrous and polymeric materials. There are three main distinct types of finishing processes: Surface Treatment by which the properties of the material are modified without generally changing the physical dimensions of the surface; Finish Machining Processes by which a small layer of material is removed from the surface by various machining processes to render improved surface characteristics; and Surface Coating Processes by which the surface properties are improved by adding fine layer(s) of materials with superior surface characteristics. Each of these primary finishing processes is presented in its own volume for ease of use, making Comprehensive Materials Finishing an essential reference source for researchers and professionals at all career stages in academia and industry. Provides an interdisciplinary focus, allowing readers to become familiar with the broad range of uses for materials finishing Brings together all known research in materials finishing in a single reference for the first time Includes case studies that illustrate theory and show how it is applied in practice
Download or read book Fossil Energy Update written by and published by . This book was released on 1982 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt:
