Download or read book Efficient Communication and Distributed Fault Diagnosis in Networks written by Zhengyu Ge (Ph. D. in engineering) and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Efficient Communication and Distributed Fault Diagnosis in Networks written by Zhengyu Ge and published by . This book was released on 1995 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fault Diagnosis written by Józef Korbicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive work presents the status and likely development of fault diagnosis, an emerging discipline of modern control engineering. It covers fundamentals of model-based fault diagnosis in a wide context, providing a good introduction to the theoretical foundation and many basic approaches of fault detection.
Download or read book Fault diagnosis in a fully distributed local computer network written by Hye Keun Kwag and published by . This book was released on 1983 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Local computer networks are being installed in diverse application areas. Many of the networks employ a distributed control scheme, which has advantages in performance and reliability over a centralized one. However, distribution of control increases the difficulty in locating faulty hardware elements. Consequently, advantages may not be fully realized unless measures are taken to account for the difficulties of fault diagnosis; yet, not much work has been done in this area. A hardcore is defined as a node or a part of a node which is fault-free and which can diagnose other elements in a system. Faults are diagnosed in most existing distributed local computer networks by assuming that every node, or a part of every node, is a fixed hardcore: a fixed node or a part of a fixed node is always a hardcore. Maintaining such high reliability may not be possible or cost-effective for some systems. A distributed network contains dynamically redundant elements, and it is reasonable to assume that fewer nodes are simultaneously faulty than are fault-free at any point in the life cycle of the network. A diagnostic model is proposed herein which determines binary evaluation results according to the status of the testing and tested nodes, and which leads the network to dynamically locate a fault-free node (a hardcore). This diagnostic model is, in most cases, simpler to implement and more cost-effective than the fixed hardcore. The selected hardcore can diagnose the other elements and can locate permanent faults. In a hop-by-hop test, the destination node and every intermediate node in a path test the transmitted data. This dissertation presents another method to locate an element with frequent transient faults; it checks data only at the destination, thereby, eliminating the need for a hop-by-hop test.
Download or read book Machine Learning and Computational Intelligence Techniques for Data Engineering written by Pradeep Singh and published by Springer Nature. This book was released on 2023-05-15 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 4th International Conference on Machine Intelligence and Signal Processing (MISP2022). The contents of this book focus on research advancements in machine intelligence, signal processing, and applications. The book covers the real-time challenges involved while processing big data analytics and stream processing with the integration of smart data computing services and interconnectivity. It also includes the progress in signal processing to process the normal and abnormal categories of real-world signals such as signals generated from IoT devices, smart systems, speech, videos and involves biomedical signal processing: electrocardiogram (ECG), electroencephalogram (EEG), magnetoencephalography (MEG), electromyogram (EMG), etc. This book proves to be a valuable resource for those in academia and industry.
Download or read book Soft Computing Theories and Applications written by Rajesh Kumar and published by Springer Nature. This book was released on 2022-06-01 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on soft computing and how it can be applied to solve real-world problems arising in various domains, ranging from medicine and healthcare, to supply chain management, image processing, and cryptanalysis. It gathers high-quality papers presented at the International Conference on Soft Computing: Theories and Applications (SoCTA 2021), organized online. The book offers valuable insights into soft computing for teachers and researchers alike; the book will inspire further research in this dynamic field.
Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Information Technologies for Rail Transportation EITRT 2021 written by Yong Qin and published by Springer Nature. This book was released on 2022-02-22 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the latest research trends, methods, and experimental results in the field of electrical and information technologies for rail transportation, which covers abundant state-of-the-art research theories and ideas. As a vital field of research that is highly relevant to current developments in a number of technological domains, the subjects it covered include intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academicians, and industrial professionals to present the most innovative research and development in the field of rail transportation electrical and information technologies. Engineers and researchers in academia, industry, and government will also explore an insightful view of the solutions that combine ideas from multiple disciplines in this field. The volumes serve as an excellent reference work for researchers and graduate students working on rail transportation and electrical and information technologies.
Download or read book Machine Learning for Environmental Monitoring in Wireless Sensor Networks written by Mahalle, Parikshit N. and published by IGI Global. This book was released on 2024-09-23 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, data fuels everything we do in a highly connected world. However, traditional environmental monitoring methods often fail to provide timely and accurate data for effective decision-making in today's rapidly changing ecosystems. The reliance on manual data collection and outdated technologies results in gaps in data coverage, making it challenging to detect and respond to environmental changes in real time. Additionally, integration between monitoring systems and advanced data analysis tools is necessary to derive actionable insights from collected data. As a result, environmental managers and policymakers face significant challenges in effectively monitoring, managing, and conserving natural resources in a rapidly evolving environment. Machine Learning for Environmental Monitoring in Wireless Sensor Networks offers a comprehensive solution to the limitations of traditional environmental monitoring methods. By harnessing the power of Wireless Sensor Networks (WSNs) and advanced machine learning algorithms, this book presents a novel approach to ecological monitoring that enables real-time, high-resolution data collection and analysis. By integrating WSNs and machine learning, environmental stakeholders can gain deeper insights into complex ecological processes, allowing for more informed decision-making and proactive management of natural resources.
Download or read book Proceedings of International Conference on Trends in Computational and Cognitive Engineering written by M. Shamim Kaiser and published by Springer Nature. This book was released on 2020-12-16 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various computational and cognitive modeling approaches in the areas of health, education, finance, environment, engineering, commerce, and industry. It is a collection of selected conference papers presented at the International Conference on Trends in Computational and Cognitive Engineering (TCCE 2020). It shares cutting-edge insights and ideas from mathematicians, engineers, scientists, and researchers and discusses fresh perspectives on problem solving in a range of research areas.
Download or read book Handbook of Research on Wireless Sensor Network Trends Technologies and Applications written by Kamila, Narendra Kumar and published by IGI Global. This book was released on 2016-08-04 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless sensor networks have become an intricate and necessary addition to daily life by providing an energy efficient way to collect and monitor data while rerouting the information to a centralized location. As the application of these networks becomes more common, it becomes imperative to evaluate their effectiveness, as well as other opportunities for possible implementation in the future. The Handbook of Research on Wireless Sensor Network Trends, Technologies, and Applications provides inclusive coverage on the processing and applications of wireless communication, sensor networks, and mobile computing. Investigating emergent research and theoretical concepts in the area of wireless sensors and their applications to daily life, this handbook of research is a critical reference source for students, researchers, engineers, scientists, and working professionals.
Download or read book Communications Signal Processing and Systems written by Qilian Liang and published by Springer. This book was released on 2019-06-14 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together papers from the 2018 International Conference on Communications, Signal Processing, and Systems, which was held in Dalian, China on July 14–16, 2018. Presenting the latest developments and discussing the interactions and links between these multidisciplinary fields, the book spans topics ranging from communications, signal processing and systems. It is aimed at undergraduate and graduate electrical engineering, computer science and mathematics students, researchers and engineers from academia and industry as well as government employees.
Download or read book Soft Computing and Signal Processing written by Jiacun Wang and published by Springer. This book was released on 2019-01-16 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents selected research papers on current developments in the field of soft computing and signal processing from the International Conference on Soft Computing and Signal Processing (ICSCSP 2018). It includes papers on current topics such as soft sets, rough sets, fuzzy logic, neural networks, genetic algorithms and machine learning, discussing various aspects of these topics, like technological, product implementation, contemporary research as well as application issues.
Download or read book Proceedings of the International Conference on Frontiers of Intelligent Computing Theory and Applications FICTA written by Suresh Chandra Satapathy and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains the papers presented at FICTA 2012: International Conference on Frontiers in Intelligent Computing: Theory and Applications held on December 22-23, 2012 in Bhubaneswar engineering College, Bhubaneswar, Odissa, India. It contains 86 papers contributed by authors from the globe. These research papers mainly focused on application of intelligent techniques which includes evolutionary computation techniques like genetic algorithm, particle swarm optimization techniques, teaching-learning based optimization etc for various engineering applications such as data mining, image processing, cloud computing, networking etc.
Download or read book Advanced Computing Networking and Informatics Volume 2 written by Malay Kumar Kundu and published by Springer. This book was released on 2014-05-26 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Computing, Networking and Informatics are three distinct and mutually exclusive disciplines of knowledge with no apparent sharing/overlap among them. However, their convergence is observed in many real world applications, including cyber-security, internet banking, healthcare, sensor networks, cognitive radio, pervasive computing amidst many others. This two-volume proceedings explore the combined use of Advanced Computing and Informatics in the next generation wireless networks and security, signal and image processing, ontology and human-computer interfaces (HCI). The two volumes together include 148 scholarly papers, which have been accepted for presentation from over 640 submissions in the second International Conference on Advanced Computing, Networking and Informatics, 2014, held in Kolkata, India during June 24-26, 2014. The first volume includes innovative computing techniques and relevant research results in informatics with selective applications in pattern recognition, signal/image processing and HCI. The second volume on the other hand demonstrates the possible scope of the computing techniques and informatics in wireless communications, networking and security.
Download or read book Dependable Computing Systems written by Hassan B. Diab and published by John Wiley & Sons. This book was released on 2005-10-05 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: A team of recognized experts leads the way to dependable computing systems With computers and networks pervading every aspect of daily life, there is an ever-growing demand for dependability. In this unique resource, researchers and organizations will find the tools needed to identify and engage state-of-the-art approaches used for the specification, design, and assessment of dependable computer systems. The first part of the book addresses models and paradigms of dependable computing, and the second part deals with enabling technologies and applications. Tough issues in creating dependable computing systems are also tackled, including: * Verification techniques * Model-based evaluation * Adjudication and data fusion * Robust communications primitives * Fault tolerance * Middleware * Grid security * Dependability in IBM mainframes * Embedded software * Real-time systems Each chapter of this contributed work has been authored by a recognized expert. This is an excellent textbook for graduate and advanced undergraduate students in electrical engineering, computer engineering, and computer science, as well as a must-have reference that will help engineers, programmers, and technologists develop systems that are secure and reliable.
Download or read book Computational Intelligence for Cybersecurity Management and Applications written by Yassine Maleh and published by CRC Press. This book was released on 2023-04-28 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: As cyberattacks continue to grow in complexity and number, computational intelligence is helping under-resourced security analysts stay one step ahead of threats. Drawing on threat intelligence from millions of studies, blogs, and news articles, computational intelligence techniques such as machine learning and automatic natural language processing quickly provide the means to identify real threats and dramatically reduce response times. The book collects and reports on recent high-quality research addressing different cybersecurity challenges. It: explores the newest developments in the use of computational intelligence and AI for cybersecurity applications provides several case studies related to computational intelligence techniques for cybersecurity in a wide range of applications (smart health care, blockchain, cyber-physical system, etc.) integrates theoretical and practical aspects of computational intelligence for cybersecurity so that any reader, from novice to expert, may understand the book’s explanations of key topics. It offers comprehensive coverage of the essential topics, including: machine learning and deep learning for cybersecurity blockchain for cybersecurity and privacy security engineering for cyber-physical systems AI and data analytics techniques for cybersecurity in smart systems trust in digital systems This book discusses the current state-of-the-art and practical solutions for the following cybersecurity and privacy issues using artificial intelligence techniques and cutting-edge technology. Readers interested in learning more about computational intelligence techniques for cybersecurity applications and management will find this book invaluable. They will get insight into potential avenues for future study on these topics and be able to prioritize their efforts better.
Download or read book Nature Inspired Computing for Wireless Sensor Networks written by Debashis De and published by Springer Nature. This book was released on 2020-02-01 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents nature inspired computing applications for the wireless sensor network (WSN). Although the use of WSN is increasing rapidly, it has a number of limitations in the context of battery issue, distraction, low communication speed, and security. This means there is a need for innovative intelligent algorithms to address these issues.The book is divided into three sections and also includes an introductory chapter providing an overview of WSN and its various applications and algorithms as well as the associated challenges. Section 1 describes bio-inspired optimization algorithms, such as genetic algorithms (GA), artificial neural networks (ANN) and artificial immune systems (AIS) in the contexts of fault analysis and diagnosis, and traffic management. Section 2 highlights swarm optimization techniques, such as African buffalo optimization (ABO), particle swarm optimization (PSO), and modified swarm intelligence technique for solving the problems of routing, network parameters optimization, and energy estimation. Lastly, Section 3 explores multi-objective optimization techniques using GA, PSO, ANN, teaching–learning-based optimization (TLBO), and combinations of the algorithms presented. As such, the book provides efficient and optimal solutions for WSN problems based on nature-inspired algorithms.
