Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this jOint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 40 (thesis year 1995) a total of 10,746 thesis titles from 19 Canadian and 144 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 40 reports theses submitted in 1995, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Simula Research Laboratory written by Aslak Tveito and published by Springer Science & Business Media. This book was released on 2009-10-22 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: When researchers gather around lunch tables, at conferences, or in bars, there are some topics that are more or less compulsory. The discussions are about the ho- less management of the university or the lab where they are working, the lack of funding for important research, politicians’ inability to grasp the potential of a p- ticularly promising ?eld, and the endless series of committees that seem to produce very little progress. It is common to meet excellent researchers claiming that they have almost no time to do research because writing applications, lecturing, and - tending to committee work seem to take most of their time. Very few ever come into a position to do something about it. With Simula we have this chance. We were handed a considerable annual grant and more or less left to ourselves to do whatever we thought would produce the best possible results. We wanted to create a place where researchers could have the time and conditions necessary to re?ect over dif?cult problems, uninterrupted by mundane dif?culties; where doctoral students could be properly supervised and learn the craft of research in a well-organized and professional manner; and where entrepreneurs could ?nd professional support in developing their research-based - plications and innovations.
Download or read book Parallel and Distributed Processing and Applications written by Yi Pan and published by Springer Science & Business Media. This book was released on 2005-10-21 with total page 1182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third International Symposium on Parallel and Distributed Processing and Applications, ISPA 2005, held in Nanjing, China in November 2005. The 90 revised full papers and 19 revised short papers presented together with 3 keynote speeches and 2 tutorials were carefully reviewed and selected from 645 submissions. The papers are organized in topical sections on cluster systems and applications, performance evaluation and measurements, distributed algorithms and systems, fault tolerance and reliability, high-performance computing and architecture, parallel algorithms and systems, network routing and communication algorithms, security algorithms and systems, grid applications and systems, database applications and data mining, distributed processing and architecture, sensor networks and protocols, peer-to-peer algorithms and systems, internet computing and Web technologies, network protocols and switching, and ad hoc and wireless networks.
Download or read book Design of Cost Efficient Interconnect Processing Units written by Marcello Coppola and published by CRC Press. This book was released on 2020-10-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Streamlined Design Solutions Specifically for NoC To solve critical network-on-chip (NoC) architecture and design problems related to structure, performance and modularity, engineers generally rely on guidance from the abundance of literature about better-understood system-level interconnection networks. However, on-chip networks present several distinct challenges that require novel and specialized solutions not found in the tried-and-true system-level techniques. A Balanced Analysis of NoC Architecture As the first detailed description of the commercial Spidergon STNoC architecture, Design of Cost-Efficient Interconnect Processing Units: Spidergon STNoC examines the highly regarded, cost-cutting technology that is set to replace well-known shared bus architectures, such as STBus, for demanding multiprocessor system-on-chip (SoC) applications. Employing a balanced, well-organized structure, simple teaching methods, numerous illustrations, and easy-to-understand examples, the authors explain: how the SoC and NoC technology works why developers designed it the way they did the system-level design methodology and tools used to configure the Spidergon STNoC architecture differences in cost structure between NoCs and system-level networks From professionals in computer sciences, electrical engineering, and other related fields, to semiconductor vendors and investors – all readers will appreciate the encyclopedic treatment of background NoC information ranging from CMPs to the basics of interconnection networks. The text introduces innovative system-level design methodology and tools for efficient design space exploration and topology selection. It also provides a wealth of key theoretical and practical MPSoC and NoC topics, such as technological deep sub-micron effects, homogeneous and heterogeneous processor architectures, multicore SoC, interconnect processing units, generic NoC components, and embeddings of common communication patterns.
Download or read book Dependable Network Computing written by Dimiter R. Avresky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependable Network Computing provides insights into various problems facing millions of global users resulting from the `internet revolution'. It covers real-time problems involving software, servers, and large-scale storage systems with adaptive fault-tolerant routing and dynamic reconfiguration techniques. Also included is material on routing protocols, QoS, and dead- and live-lock free related issues. All chapters are written by leading specialists in their respective fields. Dependable Network Computing provides useful information for scientists, researchers, and application developers building networks based on commercially off-the-shelf components.
Download or read book Proceedings of the 1993 International Conference on Parallel Processing written by C.Y. Roger Chen and published by CRC Press. This book was released on 1993-08-16 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume work presents a compendium of current and seminal papers on parallel/distributed processing offered at the 22nd International Conference on Parallel Processing, held August 16-20, 1993 in Chicago, Illinois. Topics include processor architectures; mapping algorithms to parallel systems, performance evaluations; fault diagnosis, recovery, and tolerance; cube networks; portable software; synchronization; compilers; hypercube computing; and image processing and graphics. Computer professionals in parallel processing, distributed systems, and software engineering will find this book essential to their complete computer reference library.
Download or read book Computational Science ICCS 2003 Part 3 written by Peter Sloot and published by Springer Science & Business Media. This book was released on 2003-05-22 with total page 1183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 2657, LNCS 2658, LNCS 2659, and LNCS 2660 constitutes the refereed proceedings of the Third International Conference on Computational Science, ICCS 2003, held concurrently in Melbourne, Australia and in St. Petersburg, Russia in June 2003. The four volumes present more than 460 reviewed contributed and invited papers and span the whole range of computational science, from foundational issues in computer science and algorithmic mathematics to advanced applications in virtually all application fields making use of computational techniques. These proceedings give a unique account of recent results in the field.
Download or read book Proceedings of the 1995 International Conference on Parallel Processing written by Prithviraj Banerjee and published by CRC Press. This book was released on 1995-08-08 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This set of technical books contains all the information presented at the 1995 International Conference on Parallel Processing. This conference, held August 14 - 18, featured over 100 lectures from more than 300 contributors, and included three panel sessions and three keynote addresses. The international authorship includes experts from around the globe, from Texas to Tokyo, from Leiden to London. Compiled by faculty at the University of Illinois and sponsored by Penn State University, these Proceedings are a comprehensive look at all that's new in the field of parallel processing.
Download or read book High Performance Computing HiPC 2007 written by Srinivas Aluru and published by Springer. This book was released on 2008-01-22 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th International Conference on High-Performance Computing, HiPC 2007, held in Goa, India, in December 2007. The 53 revised full papers presented together with the abstracts of five keynote talks were carefully reviewed and selected from 253 submissions. The papers are organized in topical sections on a broad range of applications including I/O and FPGAs, and microarchitecture and multiprocessor architecture.
Download or read book Routing Algorithms in Networks on Chip written by Maurizio Palesi and published by Springer Science & Business Media. This book was released on 2013-10-22 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference to routing algorithms for Networks-on-Chip (NoCs), as well as in-depth discussions of advanced solutions applied to current and next generation, many core NoC-based Systems-on-Chip (SoCs). After a basic introduction to the NoC design paradigm and architectures, routing algorithms for NoC architectures are presented and discussed at all abstraction levels, from the algorithmic level to actual implementation. Coverage emphasizes the role played by the routing algorithm and is organized around key problems affecting current and next generation, many-core SoCs. A selection of routing algorithms is included, specifically designed to address key issues faced by designers in the ultra-deep sub-micron (UDSM) era, including performance improvement, power, energy, and thermal issues, fault tolerance and reliability.
Download or read book Embedded Systems written by Krzysztof Iniewski and published by John Wiley & Sons. This book was released on 2012-10-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the significant embedded computing technologies highlighting their applications in wireless communication and computing power An embedded system is a computer system designed for specific control functions within a larger system often with real-time computing constraints. It is embedded as part of a complete device often including hardware and mechanical parts. Presented in three parts, Embedded Systems: Hardware, Design, and Implementation provides readers with an immersive introduction to this rapidly growing segment of the computer industry. Acknowledging the fact that embedded systems control many of today's most common devices such as smart phones, PC tablets, as well as hardware embedded in cars, TVs, and even refrigerators and heating systems, the book starts with a basic introduction to embedded computing systems. It hones in on system-on-a-chip (SoC), multiprocessor system-on-chip (MPSoC), and network-on-chip (NoC). It then covers on-chip integration of software and custom hardware accelerators, as well as fabric flexibility, custom architectures, and the multiple I/O standards that facilitate PCB integration. Next, it focuses on the technologies associated with embedded computing systems, going over the basics of field-programmable gate array (FPGA), digital signal processing (DSP) and application-specific integrated circuit (ASIC) technology, architectural support for on-chip integration of custom accelerators with processors, and O/S support for these systems. Finally, it offers full details on architecture, testability, and computer-aided design (CAD) support for embedded systems, soft processors, heterogeneous resources, and on-chip storage before concluding with coverage of software support in particular, O/S Linux. Embedded Systems: Hardware, Design, and Implementation is an ideal book for design engineers looking to optimize and reduce the size and cost of embedded system products and increase their reliability and performance.
Download or read book Conference Proceedings of the 2002 International Conference on Supercomputing written by and published by . This book was released on 2002 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parallel and Distributed Processing and Applications written by Jiannong Cao and published by Springer. This book was released on 2005-01-17 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcometotheproceedingsofthe2ndInternationalSymposiumonParalleland Distributed Processing and Applications (ISPA2004) which was held in Hong Kong, China, 13–15 December, 2004. With the advance of computer networks and hardware technology, parallel and distributed processing has become a key technology which plays an imp- tant part in determining future research and development activities in many academic and industrial branches. It provides a means to solve computati- ally intensive problems by improving processing speed. It is also the only - ableapproachtobuildinghighlyreliableandinherentlydistributedapplications. ISPA2004 provided a forum for scientists and engineers in academia and ind- try to exchange and discuss their experiences, new ideas, research results, and applications about all aspects of parallel and distributed computing. There was a very large number of paper submissions (361) from 26 countries and regions, including not only Asia and the Paci?c, but also Europe and North America. All submissions were reviewed by at least three program or technical committee members or external reviewers. It was extremely di?cult to select the presentations for the conference because there were so many excellent and interesting submissions. In order to allocate as many papers as possible and keep the high quality of the conference, we ?nally decided to accept 78 regular papers and 38 short papers for oral technical presentations. We believe that all of these papers and topics not only provide novel ideas, new results, work in progress and state-of-the-art techniques in this ?eld, but also stimulate the future research activities in the area of parallel and distributed computing with applications.
Download or read book Algorithms and Architectures for Parallel Processing written by Xiang-he Sun and published by Springer. This book was released on 2014-08-13 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNCS 8630 and 8631 constitutes the proceedings of the 14th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2014, held in Dalian, China, in August 2014. The 70 revised papers presented in the two volumes were selected from 285 submissions. The first volume comprises selected papers of the main conference and papers of the 1st International Workshop on Emerging Topics in Wireless and Mobile Computing, ETWMC 2014, the 5th International Workshop on Intelligent Communication Networks, IntelNet 2014, and the 5th International Workshop on Wireless Networks and Multimedia, WNM 2014. The second volume comprises selected papers of the main conference and papers of the Workshop on Computing, Communication and Control Technologies in Intelligent Transportation System, 3C in ITS 2014, and the Workshop on Security and Privacy in Computer and Network Systems, SPCNS 2014.
Download or read book High Performance Computing HiPC 2004 written by Luc Bougé and published by Springer Science & Business Media. This book was released on 2004-12-08 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th International Conference on High-Performance Computing, HiPC 2004, held in Bangalore, India in December 2004. The 48 revised full papers presented were carefully reviewed and selected from 253 submissions. The papers are organized in topical sections on wireless network management, compilers and runtime systems, high performance scientific applications, peer-to-peer and storage systems, high performance processors and routers, grids and storage systems, energy-aware and high-performance networking, and distributed algorithms.
Download or read book Computational Science and Its Applications ICCSA 2007 written by Osvaldo Gervasi and published by Springer. This book was released on 2007-08-29 with total page 1229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set constitutes the refereed proceedings of the International Conference on Computational Science and its Applications. These volumes feature outstanding papers that present a wealth of original research results in the field of computational science, from foundational issues in computer science and mathematics to advanced applications in almost all sciences that use computational techniques.
Download or read book Interconnection Networks written by Jose Duato and published by Morgan Kaufmann. This book was released on 2003 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword -- Foreword to the First Printing -- Preface -- Chapter 1 -- Introduction -- Chapter 2 -- Message Switching Layer -- Chapter 3 -- Deadlock, Livelock, and Starvation -- Chapter 4 -- Routing Algorithms -- Chapter 5 -- CollectiveCommunicationSupport -- Chapter 6 -- Fault-Tolerant Routing -- Chapter 7 -- Network Architectures -- Chapter 8 -- Messaging Layer Software -- Chapter 9 -- Performance Evaluation -- Appendix A -- Formal Definitions for Deadlock Avoidance -- Appendix B -- Acronyms -- References -- Index.
