Download or read book Effects of Wash Water Temperatures and Drying Methods on the Dimensional Stability and Surface Appearance of Filament Polyester Double Knit Fabrics written by Nancy Ann Palmer and published by . This book was released on 1971 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increased production and use of double knit fabrics made from textured filament polyester, homemakers have become concerned over procedures for care that can be successfully carried out in the home. The purpose of this study was to determine what effects wash water temperatures and drying methods have on the dimensional stability and surface appearance of filament polyester double knit fabrics. Changes in general physical properties, dimensional change, and surface appearance of four fabrics were studied after ten launderings at three wash water temperatures with two drying methods. Shirts made from two fabrics were worn by nursery school children, laundered ten times, and rated for pilling and snagging. All filament polyester double knit fabrics in this study shrank more when washed in hot water and when dried in the tumble dryer than when washed in warm or cool water and horizontally screen dried. Shrinkage was continuous after five and ten launderings, although at a decreasing rate. All four fabrics had better appearance when laundered in warm or cool wash water and when tumble dried after ten launderings than when washed in hot water and horizontally screen dried. Data indicated that resistance to pilling as tested in the Random Tumble Pilling Tester and snagging on shirts worn and laundered ten times were more dependent upon fabric characteristics and wearing conditions than on laundering conditions. Fabrics won consumer acceptance by parents of nursery school children who participated in the wear study.

Download or read book The Effect of Water Temperature and Fabric water Ratio on Energy Consumption in Laundering written by Danice Fong Lee and published by . This book was released on 1978 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book O S U Theses and Dissertations 1970 1977 written by Oregon State University and published by . This book was released on 1980 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Two Water Temperatures a Cold Water Detergent and Drying Methods on the Whiteness and Color Retention of Fabrics written by Fredericka Peschke Lindquist and published by . This book was released on 1968 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Dry Cleaning and Laundering on the Finish Dimensional Stability and Color of a Selected Group of Flannel Fabrics written by Mary L. Goetschel and published by . This book was released on 1963 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Laundering on the Dimensional Stability of Weft Knit Fabrics written by Marsha Jane Herndon and published by . This book was released on 1975 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effects of Fabric water Ratio in Home Laundering on Fabric Appearance and Water and Energy Consumption written by Noreen Cho and published by . This book was released on 1978 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Heat treatment on Dimensional Stability of Cotton polyester Knitted Fabrics written by Martin E. Gurian and published by . This book was released on 1967 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Textile Technology Digest written by and published by . This book was released on 2002 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methods for Determination of Dimensional Stability of Textiles to Dry Cleaning in Perchloroethylene written by British Standards Institution and published by . This book was released on 1973 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effects of Knitting Construction and Laundry Procedures on the Fuzzing and Snagging of Polyester Double Knit Fabrics written by Mildred Mann Amis and published by . This book was released on 1970 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methods for Determination of Dimensional Stability of Textiles to Dry Cleaning in Tetrachloroethylene M thodes D essai Pour la D termination de la Stabilit Dimensionelle Des Textiles Au Nettoyage Sec Dans Du T trachloro thyl ne Pr fmethoden F r Die Bestimmung Der Masshaltigkeit Von Textilwaren Nach Der Chemischereinigung in Tetrachlor thylen written by and published by . This book was released on 1980-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Fibres written by J. W. S. Hearle and published by Elsevier. This book was released on 2001-10-26 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important new handbook provides comprehensive coverage of how high performance fibres are designed and manufactured and covers their capabilities and applications. The high-modulus, high-tenacity (HM-HT) fibres fall naturally into three groups – polymer fibres such as aramids and polyethylene fibres; carbon fibres such as Kevlar; and inorganic fibres based on glass and ceramic fibres.The books shows how high performance fibres are being increasingly used for a wide range of applications including goetextiles and geomembranes and for construction and civil engineering projects as well as in specialist fibres within composite materials where their ability to fulfil demanding roles makes them an effective choice for the engineer and materials scientist. - Provides a comprehensive overview of how high performance fibres are designed and manufactured and covers their capabilities and applications - Explains how high performance fibres are being increasingly used for a wide range of applications, including geotextiles and geomembranes and construction and civil engineering projects

Download or read book Fibre Structure written by J. W. S. Hearle and published by Elsevier. This book was released on 2013-09-03 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fibre Structure is a 19-chapter text that emerged from lectures presented at the Manchester College of Science and Technology. The interest of fiber studies lies to some extent in the important part textile materials play in general living and in industrial products and operations. The first chapters deal with the chemistry of fiber-forming polymers, followed by considerable chapters on the controversial subject of the fine structure of fibers. The remaining chapters describe the special features of all the important fibers, including glass and asbestos. Textile scientists, researchers, and manufacturers will find this book invaluable.

Download or read book Quality Characterisation of Apparel written by Subrata Das and published by Woodhead Publishing India in T. This book was released on 2020-12-30 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality characterisation of apparel entails dimensional and colour fastness properties, durability and surface appearance of apparels along with mandatory regulation on flammability, fibre composition and care labels. Safety issues for different accessories in children garment and safety review of typical garments have been thoroughly covered in this book. In this second edition, a new chapter has been introduced on characterisation of varieties of washed denim fabrics. Quality characterisation of different finished leather and performance requirements of different leather and suede garments have also been added to the second edition of the book for a wider coverage of the area of quality characterisation of apparels. The novelty of this book is the way the topics are arranged on actual practical way in which apparel manufacturing units, buying offices and retailers are facing day-to-day challenges in different activities in their business. This will help the apparel business community to avoid quality related surprises and cut down rejections. The book would be of immense use for textile/ garment manufacturers, buying offices, retailers and the educational cluster of apparel/fashion.

Download or read book Physical Testing of Textiles written by B P Saville and published by Elsevier. This book was released on 1999-01-08 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the physical testing of textiles in the form of fibre, yarn and fabric, the emphasis throughout eing on standard and reproducible tests. After an introductory explanation of sampling and measurement, the author explores the effects of moisture on textiles, then goes on to discuss fibre dimension, yarn tests for linear density, twist, evenness and hairiness, tensile strength, and dimensional stability and serviceability. Also covered are aspects of comfort and fabric handle, colour fastness and quality assurance. The book's comprehensive coverage of the physical properties of textiles makes it an essential reference for managers in the textiles industry concerned with quality assurance, garment and fabric technologists, and students of textile science and engineering.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques