Download or read book Effects of Ultrasound in Microelectronic Ultrasonic Wire Bonding written by Ivan Lum and published by . This book was released on 2007 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic wire bonding is the most utilized technique in forming electrical interconnections in microelectronics. However, there is a lacking in the fundamental understanding of the process. In order for there to be improvements in the process a better understanding of the process is required. The mechanism of the bond formation in ultrasonic wire bonding is not known. Although there have been theories proposed, inconsistencies have been shown to exist in them. One of the main inconsistencies is the contribution of ultrasound to the bonding process. A series of experiments to investigate the mechanism of bond formation are performed on a semi automatic wire bonder at room temperature. 25 [mu]m diameter Au wire is ball bonded and also 25 [mu]m diameter Al wire is wedge-wedge bonded onto polished Cu sheets of thickness 2 mm. It is found that a modified microslip theory can describe the evolution of bonding. With increasing ultrasonic power the bond contact transitions from microslip into gross sliding. The reciprocating tangential relative motion at the bond interface results in wear of surface contaminants which leads to clean metal/metal contact and bonding. The effect of superimposed ultrasound during deformation on the residual hardness of a bonded ball is systematically studied for the first time. An innovative bonding procedure with in-situ ball deformation and hardness measurement is developed using an ESEC WB3100 automatic ball bonder. 50 [mu]m diameter Au wire is bonded at various ultrasound levels onto Au metallized PCB substrate at room temperature. It is found that sufficient ultrasound which is applied during the deformation leads to a bonded ball which is softer than a ball with a similar amount of deformation without ultrasound. No hardening of the 100 [mu]m diameter Au ball is observed even with the maximum ultrasonic power capable of the equipment of 900 mW. In summary, the fundamental effect of ultrasound in the wire bonding process is the reciprocating tangential displacement at the bond interface resulting in contaminant dispersal and bonding. A second effect of ultrasound is the softening of the bonded material when compared to a similarly non-ultrasound deformed ball.
Download or read book Microelectronic Ultrasonic Bonding written by George G. Harman and published by . This book was released on 1974 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ire Bonding in Microelectronics written by George G. Harman and published by McGraw Hill Professional. This book was released on 1997 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this work is considered a classic reference in the field. This new edition updates the entire work and adds 100 pages of information covering new materials and techniques such as fine pitch
Download or read book Microelectronic Interconnections and Assembly written by G.G. Harman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: MICROELECTRONIC INTERCONNECTIONS AND MICROASSEMBL Y WORKSHOP 18-21 May 1996, Prague, Czech Republic Conference Organizers: George Harman, NIST (USA) and Pavel Mach (Czech Republic) Summary of the Technical Program Thirty two presentations were given in eight technical sessions at the Workshop. A list of these sessions and their chairpersons is attached below. The Workshop was devoted to the technical aspects of advanced interconnections and microassembly, but also included papers on the education issues required to prepare students to work in these areas. In addition to new technical developments, several papers presented overviews predicting the future directions of these technologies. The basic issue is that electronic systems will continue to be miniaturized and at the same time performance must continue to improve. Various industry roadmaps were discussed as well as new smaller packaging and interconnection concepts. The newest chip packages are often based on the selection of an appropriate interconnection method. An example is the chip-scale package, which has horizontal (x-y) dimensions,;; 20% larger than the actual silicon chip itself. The chip is often flip-chip connected to a micro ball-grid-array, but direct chip attach was described also. Several papers described advances in the manufacture of such packages.
Download or read book Wire Bonding in Microelectronics written by George Harman and published by McGraw Hill Professional. This book was released on 2009-06-05 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industry Standard Guide to Wire Bonding--Fully Updated The definitive resource on the critical process of connecting semiconductors with their packages, Wire Bonding in Microelectronics, Third Edition, has been thoroughly revised to help you meet the challenges of today's small-scale and fine-pitch microelectronics. This authoritative guide covers every aspect of designing, manufacturing, and evaluating wire bonds engineered with cutting-edge techniques. In addition to gaining a full grasp of bonding technology, you'll learn how to create reliable bonds at exceedingly high yields, test wire bonds, solve common bonding problems, implement molecular cleaning methods, and much more. COVERAGE INCLUDES: Ultrasonic bonding systems and technologies, including high-frequency systems Bonding wire metallurgy and characteristics, including copper wire Wire bond testing Gold-aluminum intermetallic compounds and other interface reactions Gold and nickel-based bond pad plating materials and problems Cleaning to improve bondability and reliability Mechanical problems in wire bonding High-yield, fifine-pitch, specialized-looping, soft-substrate, and extremetemperature wire bonds Copper, low-dielectric-constant (Cu/Lo-k) technology and problems Wire bonding process modeling and simulation CD includes all the book's full-color figures plus animations
Download or read book Microjoining and Nanojoining written by Y N Zhou and published by Elsevier. This book was released on 2008-03-27 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many important advances in technology have been associated with nanotechnology and the miniaturization of components, devices and systems. Microjoining has been closely associated with the evolution of microelectronic packaging, but actually covers a much broader area, and is essential for manufacturing many electronic, precision and medical products.Part one reviews the basics of microjoining, including solid-state bonding and fusion microwelding. Part two covers microjoining and nanojoining processes, such as bonding mechanisms and metallurgy, process development and optimization, thermal stresses and distortion, positioning and fixturing, sensing, and numerical modelling. Part three discusses microjoining of materials such as plastics, ceramics, metals and advanced materials such as shape memory alloys and nanomaterials. The book also discusses applications of microjoining such as joining superconductors, the manufacture of medical devices and the sealing of solid oxide fuel cells.This book provides a comprehensive overview of the fundamental aspects of microjoining processes and techniques. It is a valuable reference for production engineers, designers and researchers using or studying microjoining technologies in such industries as microelectronics and biomedical engineering. Reviews the basics of nanojoining including solid-state bonding and fusion microwelding Covers microjoining and nanojoining processes such as bonding mechanisms and metallurgy, sensing and numerical modelling Examines applications of microjoining such as the manufacturing of medical devices, and the sealing of solid oxide fuel cells
Download or read book NBS Special Publication written by and published by . This book was released on 1974 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Simulation for Microelectronic Packaging Assembly written by Shen Liu and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there is increasing need for modeling and simulation in the IC package design phase, most assembly processes and various reliability tests are still based on the time consuming "test and try out" method to obtain the best solution. Modeling and simulation can easily ensure virtual Design of Experiments (DoE) to achieve the optimal solution. This has greatly reduced the cost and production time, especially for new product development. Using modeling and simulation will become increasingly necessary for future advances in 3D package development. In this book, Liu and Liu allow people in the area to learn the basic and advanced modeling and simulation skills to help solve problems they encounter. Models and simulates numerous processes in manufacturing, reliability and testing for the first time Provides the skills necessary for virtual prototyping and virtual reliability qualification and testing Demonstrates concurrent engineering and co-design approaches for advanced engineering design of microelectronic products Covers packaging and assembly for typical ICs, optoelectronics, MEMS, 2D/3D SiP, and nano interconnects Appendix and color images available for download from the book's companion website Liu and Liu have optimized the book for practicing engineers, researchers, and post-graduates in microelectronic packaging and interconnection design, assembly manufacturing, electronic reliability/quality, and semiconductor materials. Product managers, application engineers, sales and marketing staff, who need to explain to customers how the assembly manufacturing, reliability and testing will impact their products, will also find this book a critical resource. Appendix and color version of selected figures can be found at www.wiley.com/go/liu/packaging
Download or read book 1995 International Symposium on Microelectronics written by International Symposium on Microelectronics and published by . This book was released on 1995 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Measurement Technology written by Institute for Applied Technology (U.S.). Electronic Technology Division and published by . This book was released on 1973 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia Of Packaging Materials Processes And Mechanics Set 1 Die attach And Wafer Bonding Technology A 4 volume Set written by and published by World Scientific. This book was released on 2019-08-27 with total page 1079 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging materials, assembly processes, and the detailed understanding of multilayer mechanics have enabled much of the progress in miniaturization, reliability, and functional density achieved by modern electronic, microelectronic, and nanoelectronic products. The design and manufacture of miniaturized packages, providing low-loss electrical and/or optical communication, while protecting the semiconductor chips from environmental stresses and internal power cycling, require a carefully balanced selection of packaging materials and processes. Due to the relative fragility of these semiconductor chips, as well as the underlying laminated substrates and the bridging interconnect, selection of the packaging materials and processes is inextricably bound with the mechanical behavior of the intimately packaged multilayer structures, in all phases of development for traditional, as well as emerging, electronic product categories.The Encyclopedia of Packaging Materials, Processes, and Mechanics, compiled in 8, multi-volume sets, provides comprehensive coverage of the configurations and techniques, assembly materials and processes, modeling and simulation tools, and experimental characterization and validation techniques for electronic packaging. Each of the volumes presents the accumulated wisdom and shared perspectives of leading researchers and practitioners in the packaging of electronic components. The Encyclopedia of Packaging Materials, Processes, and Mechanics will provide the novice and student with a complete reference for a quick ascent on the packaging 'learning curve,' the practitioner with a validated set of techniques and tools to face every challenge in packaging design and development, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in the assembly and mechanical behavior of electronic and photonic components and systems. It will be most beneficial to undergraduate and graduate students studying materials, mechanical, electrical, and electronic engineering, with a strong interest in electronic packaging applications.
Download or read book Materials for Advanced Packaging written by Daniel Lu and published by Springer. This book was released on 2016-11-18 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.
Download or read book Semiconductor Measurement Technology Combined Quarterly Report October 1 1973 to March 31 1974 written by W. Murray Bullis and published by . This book was released on 1974 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 1995 International Symposium on Microelectronics written by and published by . This book was released on 1995 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectronic Ultrasonic Bonding written by George G. Harman and published by . This book was released on 1974 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.
Download or read book The International Journal for Hybrid Microelectronics written by and published by . This book was released on 1983 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
