Download or read book Effects of Thermal Aging and Moisture Absorption on Mechanical and Physical Properties of Cyanate Ester Polymers written by Aparna Venkatramani and published by . This book was released on 2000 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to the Dimensional Stability of Composite Materials written by Ernest G. Wolff and published by DEStech Publications, Inc. This book was released on 2004 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive introduction to the quantitative analysis of dimensional instability in composite materials. It will aid in predicting deformations in a wide range of composite materials products and parts, under mechanical, thermophysical, and environmental stresses over time.
Download or read book Chemistry and Technology of Cyanate Ester Resins written by I. Hamerton and published by Springer Science & Business Media. This book was released on 1994-10-31 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: After epoxy resins and polyimides, cyanate esters arguably form the most well-developed group of high-temperature, thermosetting polymers. They possess a number of desirable performance characteristics which make them of increasing technological importance, where their somewhat higher costs are acceptable. The principal end uses for cyanate esters are as matrix resins for printed wiring board laminates and structural composites. For the electronics markets, the low dielectric loss characteristics, dimen sional stability at molten solder temperatures and excellent adhesion to conductor metals at temperatures up to 250°C, are desirable. In their use in aerospace composites, unmodified cyanate esters offer twice the frac ture toughness of multifunctional epoxies, while achieving a service tem perature intermediate between epoxy and bis-maleimide capabilities. Applications in radome construction and aircraft with reduced radar signatures utilize the unusually low capacitance properties of cyanate esters and associated low dissipation factors. While a number of commercial cyanate ester monomers and prepoly mers are now available, to date there has been no comprehensive review of the chemistry and recent technological applications of this versatile family of resins. The aims of the present text are to present these in a com pact, readable form. The work is primarily aimed at materials scientists and polymer technologists involved in research and development in the chemical, electronics, aerospace and adhesives industries. It is hoped that advanced undergraduates and postgraduates in polymer chemistry and technology, and materials science/technology will find it a useful introduc tion and source of reference in the course of their studies.
Download or read book Environmental Degradation of Industrial Composites written by Celine A Mahieux and published by Elsevier. This book was released on 2005-12-14 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to their low density and tailored properties, polymer matrix composites are attractive candidates for a large number of industrial applications ranging from aerospace to transportation and energy. However, the behaviour of polymer-based materials is strongly affected by a number of environmental factors. Environmental Degradation in Industrial Composites provides vital information on the effects of environmental factors such as temperature, liquid and gas exposure, electrical fields and radiations, and how micro- and micromechanical calculations during design and manufacture must take these effects into account. The book concludes with reviews on standard and specific testing methods for the various environmental factors and their combinations, helping mechanical/materials engineers and specifiers to predict possible changes due to environmental conditions. Each chapter is supplemented by industrial case studies to help in the understanding of degradation of composites in real life situations.This book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracy This book will help you to...* Understand how environmental factors lead to degradation effects in polymer matrix composite structures* Build these factors into calculations when predicting the part performance and lifetime of structures* Compare real-life situations from case studies with your predicted results* Predict probable composite behaviour with greater accuracy
Download or read book Polymer Matrix Composites Guidelines for Characterization of Structural Materials written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2022-09-06 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first volume of this six-volume compendium contains guidelines for determining the properties of polymer matrix composite material systems and their constituents, as well as the properties of generic structural elements, including test planning, test matrices, sampling, conditioning, test procedure selection, data reporting, data reduction, statistical analysis, and other related topics. Special attention is given to the statistical treatment and analysis of data. Volume 1 contains guidelines for general development of material characterization data as well as specific requirements for publication of material data in CMH-17. The primary purpose of this volume of the handbook is to document industry best-practices for engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials. The Composite Materials Handbook, referred to by industry groups as CMH-17, is a six-volume engineering reference tool that contains thousands of records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design, analyze, fabricate, certify and support end items using composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair.
Download or read book The Effect of Radiation on the Mechanical Properties of Polymers written by R. K. Traeger and published by . This book was released on 1964 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2017-10-24 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive Polymers: Fundamentals and Applications: A Concise Guide to Industrial Polymers, Third Edition introduces engineers and scientists to a range of reactive polymers and then details their applications and performance benefits. Basic principles and industrial processes are described for each class of reactive resin (thermoset), as well as additives, the curing process, applications and uses. The initial chapters are devoted to individual resin types (e.g., epoxides, cyanacrylates), followed by more general chapters on topics such as reactive extrusion and dental applications. Injection molding of reactive polymers, radiation curing, thermosetting elastomers, and reactive extrusion equipment are covered as well. The use of reactive polymers enables manufacturers to make chemical changes at a late stage in the production process, which, in turn, cause changes in performance and properties. Material selection and control of the reaction are essential to achieve optimal performance. Material new to this edition includes the most recent developments, applications and commercial products for each chemical class of thermosets, as well as sections on fabrication methods, reactive biopolymers, recycling of reactive polymers and case studies. Covers the basics and most recent developments, including reactive biopolymers, recycling of reactive polymers, nanocomposites and fluorosilicones Offers an indispensable guide for engineers and advanced students alike Provides extensive literature and patent review Reflects a thorough review of all literature published in this area since 2014 Features revised and updated chapters to reflect the latest research in reactive polymers
Download or read book Fundamentals and Recent Advances in Nanocomposites Based on Polymers and Nanocellulose written by Md Rezaur Rahman and published by Elsevier. This book was released on 2021-10-05 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals and Recent Advances in Nanocomposites Based on Polymers and Nanocellulose brings together the latest research in cellulose-based nanocomposites, covering fundamentals, processing, properties, performance, applications, and the state of the art. The book begins by explaining the fundamentals of cellulose and cellulose-based nanocomposites, including sources, extraction, types, classification, linkages, model structure, model compounds, and characterization techniques. The second part of the book covers the incorporation of cellulose fillers to improve the properties or characteristics of nanocomposites, organized by composite category, including in aerogels, thermoplastic composites, thermoset composites, bioplastic composites, carbon nanofibers, rubber composites, carbon fibers, and foaming materials. Throughout these chapters, there is an emphasis on the latest innovations and application potential. Finally, applications are explored in more detail, notably focusing on the utilization of nanocellulose in biodegradable composites for biomedical applications, along with other important industrial application areas. This book is of great interest to researchers, scientists, and advanced students working with bio-based materials, and across polymer science, nanomaterials, composite materials, plastics engineering, chemical engineering, materials science and engineering, as well as R&D professionals, engineers, and industrialists interested in the development of bio-based materials for advanced applications or material commercialization. Presents the fundamentals of cellulose-based nanocomposites, including sources, extraction, types, classification, linkages, structure, compounds, and characterization. Discusses and analyzes the most suitable fabrication methods and processing techniques for cellulose as a reinforcement in a range of composites. Opens the door to a range of cutting-edge applications and considers key aspects such as cost, lifecycle, and biodegradability.
Download or read book Ageing of Composites written by Rod Martin and published by Elsevier. This book was released on 2008-08-29 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ageing of composites is a highly topical subject given the increasing use of composites in structural applications in many industries. Ageing of composites addresses many of the uncertainties about the long-term performance of composites and how they age under conditions encountered in service.The first part of the book reviews processes and modelling of composite ageing including physical and chemical ageing of polymeric composites, ageing of glass-ceramic matrix composites, chemical ageing mechanisms, stress corrosion cracking, thermo-oxidative ageing, spectroscopy of ageing composites, modelling physical and accelerated ageing and ageing of silicon carbide composites. Part two examines ageing of composites in transport applications including aircraft, vehicles and ships. Part three reviews ageing of composites in non-transport applications such as implants in medical devices, oil and gas refining, construction, chemical processing and underwater applications.With its distinguished editor and international team of contributors, Ageing of composites is a valuable reference guide for composite manufacturers and developers. It also serves as a source of information for material scientists, designers and engineers in industries that use composites, including transport, chemical processing and medical engineering. Addresses many of the uncertainties about the long-term performance of composites and how they age under conditions encountered in service Reviews processes and modelling of composite ageing including chemical ageing mechanisms and stress corrosion cracking Discusses ageing of composites in both transport and non-transport applications ranging from aircraft to implants in medical devices
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Dynamics In Extreme Environments written by Rainer A Dressler and published by World Scientific. This book was released on 2001-03-05 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: As computing power increases, a growing number of macroscopic phenomena are modeled at the molecular level. Consequently, new requirements are generated for the understanding of molecular dynamics in exotic conditions.This book illustrates the importance of detailed chemical dynamics and the role it plays in the phenomenology of a number of extreme environments. Each chapter addresses one or more extreme environments, outlines the associated chemical mechanisms of relevance, and then covers the leading edge science that elucidates the chemical coupling. The chapters exhibit a balance between theory and experiment, gas phase, solid state, and surface dynamics, and geophysical and technical environments.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Polymer Aging at the Cutting Edge written by Gennadiĭ Efremovich Zaikov and published by Nova Publishers. This book was released on 2002 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty-one papers collected here report on the latest work in polymer ageing, looking at aspects including the ageing of polyester resin under moisture action, kinetic peculiarities of synthesis of Adamantan- containing polyamidoacids and polyimides, the influence of intensive mechanical treatment on decomposition of barium peroxide, and ecological aspects of manufacture and application of highly pure liquid substances. Biodegradable blends of starch and cellulose derivatives, the quantum chemical calculation of components of biosynthesis of adrenaline, low combustible poly(vinyl chloride) compositions with mixtures of plasticiSers, and inhibited oxidation of polypropylene melt are some other topics discussed.
Download or read book The Effect of Thermal and Irradiation Aging Simulation Procedures on Polymer Properties written by Larry D. Bustard and published by . This book was released on 1984 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Failure of Polymer Products Due to Thermo oxidation written by D. C. Wright and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined effects of oxidising media and heat result in degradation by thermo-oxidation. The principles and cases described in this review emphasise long term degradation in service. Two additional phenomena that influence thermo-oxidation are also described: catalysis by certain metal ions, and the influence of stress. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Download or read book Oxydative Ageing of Polymers written by Jacques Verdu and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to rehabilitate kinetic modeling in the domain of polymer ageing, where it has been almost abandoned by the research community. Kinetic modeling is a key step for lifetime prediction, a crucial problem in many industrial domains in which needs cannot be satisfied by the common empirical methods. The book proposes a renewed approach of lifetime prediction in polymer oxidative ageing. This approach is based on kinetic models built from relatively simple mechanistic schemes but integrating physical processes (oxygen diffusion and stabilizer transport), and use property (for instance mechanical failure) changes. An important chapter is dedicated to radiation-induced oxidation and its most important applications: radiochemical ageing at low dose rates and photo-chemical ageing under solar radiation. There is also a chapter devoted to the problem of ageing under coupled oxidation and mechanical loading.
Download or read book Advanced Polymers Abstracts written by and published by . This book was released on 1996 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
