Download or read book Effects of Shot Peening on High Cycle Fretting Fatigue Behavior of Ti 6Al 4V written by Halil I. Yuksel and published by . This book was released on 2002-03-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effects of Shot-peening on High Cycle Fretting Fatigue behavior of Ti-6Al-4V were investigated. Experiments were performed with 6.35 mm thick specimens which provided S/N curves. After the tests, it was observed that the specimens failed near the trailing edge of contact. Scanning Electron Microscopy showed that cracks initiated on the contact surface for 6.35 mm, and at the depth of specimen ranging from 200 to 300 microns for 3.81 mm thick specimens. Initial crack orientation was around 37 and 42 degrees respectively for 6.35 and 3.81 mm thicknesses. Finite Element Analysis (FEA) was conducted, and using FEA results, Smith-Watson-Topper, Findley, Shear Stress Range and Modified Shear Stress Range parameters were evaluated. Stress relaxation was observed after the failure of the specimens, and evaluations were repeated for different percentages of stress relaxation. Based on specific assumptions about stress relaxation. Modified Shear Stress range parameter was determined to be the only appropriate fatigue parameter that could meet all the required conditions for shot-peened fretting fatigue specimens. Also thickness effects on shot-peened specimens were investigated and discussed in this study.
Download or read book Fretting Fatigue Behavior of Shot Peened Titanium Alloy TI 6AL 4V Under Seawater Conditions written by and published by . This book was released on 2004 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fretting fatigue behavior of the shot-peened titanium alloy, Ti-6Al-4V, was investigated under a corrosive environment of synthetic seawater. Fretting fatigue tests were performed over a wide stress range to determine the effect of seawater at high and low cycle fatigue regimes. The results from this study showed: (1) seawater significantly reduces the fretting fatigue life of shot-peened Ti-6Al-4V at both high and low cycle fatigue relative to its counterpart in ambient laboratory conditions, (2) shot peening increases the fretting fatigue life of Ti-6Al-4V when tested under dry and seawater conditions relative to its counterpart of unpeened Ti-6Al-4V, (3) surface debris from samples tested under seawater conditions contained large quantities of oxide and seawater contaminants, (4) cleaning after testing removed most of the oxide and seawater contaminants from the sample.
Download or read book Effects of Laser Peening on Fretting Fatigue of Ti 6Al 4V and Hydrogen Permeation of 316L Stainless Steel Coupons written by Kuo-Shu Liu and published by . This book was released on 2006 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Cycle Fatigue written by Theodore Nicholas and published by Elsevier. This book was released on 2006-07-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr Theodore Nicholas ran the High Cycle Fatigue Program for the US Air Force between 1995 and 2003 at Wright-Patterson Air Force Base, and is one of the world’s leading authorities on the subject, having authored over 250 papers in leading archival journals and books. Bringing his plethora of expertise to this book, Dr Nicholas discusses the subject of high cycle fatigue (HCF) from an engineering viewpoint in response to a series of HCF failures in the USAF and the concurrent realization that HCF failures in general were taking place universally in both civilian and military engines. Topic covered include: Constant life diagrams Fatigue limits under combined LCF and HCF Notch fatigue under HCF conditions Foreign object damage (FOD) Brings years of the Author's US Air Force experience in high cycle fatigue together in one text Discusses HCF in the context of recent international military and civilian engine failures
Download or read book Gradient Microstructure in Laser Shock Peened Materials written by Liucheng Zhou and published by Springer Nature. This book was released on 2021-06-12 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamentals and principles of laser shock peening (LSP) for aeronautical materials. It focuses on the innovation in both theory and method related to LSP-induced gradient structures in titanium alloys and Ni-based alloys which have been commonly used in aircraft industries. The main contents of the book include: the characteristics of laser shock wave, the formation mechanism of gradient structures and the strengthening-toughing mechanism by gradient structures. The research has accumulated a large amount of experimental data, which has proven the significant effectiveness of LSP on the improvement of the fatigue performance of metal parts, and related findings have been successfully applied in aerospace field. This book could be used by the researchers who work in the field of LSP, mechanical strength, machine manufacturing and surface engineering, as well as who major in laser shock wave and materials science.
Download or read book Laser Shock Peening written by Shikun Zou and published by Springer Nature. This book was released on 2023-06-09 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the fundamentals and latest progresses in the research and applications of laser shock peening (LSP). As a novel technology for surface treatment, LSP greatly improves the resistance of metallic materials to fatigue and corrosion. The book presents the mechanisms, techniques, and applications of LSP in a systematic way. It discusses a series of new progresses in fatigue performance improvement of metal parts with LSP. It also introduces lasers, equipment, and techniques of newly developed industry LSP, with a detailed description of the novel LSP blisk. The book demonstrates in details numerical analysis and simulation techniques and illustrates process stability control, quality control, and analysis determination techniques. It is a valuable reference for scientists, engineers, and students in the fields of laser science, materials science, astronautics, and aeronautics who seek to understand, develop, and optimize LSP processes.
Download or read book Laser Shocking Nano Crystallization and High Temperature Modification Technology written by Xudong Ren and published by Springer. This book was released on 2015-03-04 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present foundational research on the nano-crystallization, high-temperature modification, micro-structure evolution and plastic deformation induced by laser shock processing. In this regard, the focus is on heat-resistant steel, aluminum alloy, Ti alloys and Ni-based alloys, offering valuable scientific insights into the industrial applications of laser shock processing (LSP) technology. The book addresses various topics, i.e., the formation mechanism and productivity improvement of nano-crystalline diamond by laser processing, the surface integrity and fatigue lives of heat-resistant steels, Ti alloys and Ni-based alloys after LSP with different processing parameters, tensile properties and fractural morphology after LSP at different temperatures, strain-rates and grain refinement mechanisms based on the micro-structure evolution. Moreover, the effect of heating temperature and exposure time on stress thermal relaxation and the influence of compressive stress on the stress intensity factor of hole-edge cracks by high strain rate laser shock processing are also analyzed. A new type of statistical data model to describe the fatigue cracking growth with limited data is proposed based on the consideration of the effects of fracture growth on the reliability and confidence level. This book is intended for researchers, engineers and postgraduates in the fields of nanotechnology and micro-engineering who are interested in the partial or overall strengthening of materials, especially those with a focus on surface integrity and fatigue life.
Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts
Download or read book Comprehensive Materials Finishing written by M.S.J. Hashmi and published by Elsevier. This book was released on 2016-08-29 with total page 1467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finish Manufacturing Processes are those final stage processing techniques which are deployed to bring a product to readiness for marketing and putting in service. Over recent decades a number of finish manufacturing processes have been newly developed by researchers and technologists. Many of these developments have been reported and illustrated in existing literature in a piecemeal manner or in relation only to specific applications. For the first time, Comprehensive Materials Finishing, Three Volume Set integrates a wide body of this knowledge and understanding into a single, comprehensive work. Containing a mixture of review articles, case studies and research findings resulting from R & D activities in industrial and academic domains, this reference work focuses on how some finish manufacturing processes are advantageous for a broad range of technologies. These include applicability, energy and technological costs as well as practicability of implementation. The work covers a wide range of materials such as ferrous, non-ferrous and polymeric materials. There are three main distinct types of finishing processes: Surface Treatment by which the properties of the material are modified without generally changing the physical dimensions of the surface; Finish Machining Processes by which a small layer of material is removed from the surface by various machining processes to render improved surface characteristics; and Surface Coating Processes by which the surface properties are improved by adding fine layer(s) of materials with superior surface characteristics. Each of these primary finishing processes is presented in its own volume for ease of use, making Comprehensive Materials Finishing an essential reference source for researchers and professionals at all career stages in academia and industry. Provides an interdisciplinary focus, allowing readers to become familiar with the broad range of uses for materials finishing Brings together all known research in materials finishing in a single reference for the first time Includes case studies that illustrate theory and show how it is applied in practice
Download or read book Novel Research about Biomechanics and Biomaterials Used in Hip Knee and Related Joints written by J. Philippe Kretzer and published by MDPI. This book was released on 2021-08-18 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Joint replacement is a very successful medical treatment. However, the survivorship of hip, knee, shoulder, and other implants is limited. The degradation of materials and the immune response against degradation products or an altered tissue loading condition as well as infections remain key factors of their failure. Current research in biomechanics and biomaterials is trying to overcome these existing limitations. This includes new implant designs and materials, bearings concepts and tribology, kinematical concepts, surgical techniques, and anti-inflammatory and infection prevention strategies. A careful evaluation of new materials and concepts is required in order to fully assess the strengths and weaknesses and to improve the quality and outcomes of joint replacements. Therefore, extensive research and clinical trials are essential. The main aspects that are addressed in this Special Issue are related to new material, design and manufacturing considerations of implants, implant wear and its potential clinical consequence, implant fixation, infection-related material aspects, and taper-related research topics. This Special Issue gives an overview of the ongoing research in those fields. The contributions were solicited from researchers working in the fields of biomechanics, biomaterials, and bio- and tissue-engineering.
Download or read book Current Advancements in Stereo Vision written by Asim Bhatti and published by BoD – Books on Demand. This book was released on 2012-07-11 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a new edition of stereo vision book series of INTECH Open Access Publisher and it presents diverse range of ideas and applications highlighting current research/technology trends and advances in the field of stereo vision. The topics covered in this book include fundamental theoretical aspects of robust stereo correspondence estimation, novel and robust algorithms, hardware implementation for fast execution and applications in wide range of disciplines. Particularly interesting approaches include neuromorphic engineering, probabilistic analysis and anisotropic reaction diffusion addressing the problem of stereo correspondence and the applications in mobile robotics for autonomous terrain mapping and navigation. SterCentre for Intelligent Systems Research (CISR), Institute of Technology, Research and Innovation (ITRI),eo algorithm with anisotropic reaction-diffusion systems utilizing biologically motivated reaction-diffusion systems with anisotropic diffusion coefficients makes it an interesting addition to the book.
Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book Tribology in Materials and Manufacturing written by Amar Patnaik and published by BoD – Books on Demand. This book was released on 2021-02-03 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology in Materials and Manufacturing - Wear, Friction and Lubrication brings an interdisciplinary perspective to accomplish a more detailed understanding of tribological assessments, friction, lubrication, and wear in advanced manufacturing. Chapters cover such topics as ionic liquids, non-textured and textured surfaces, green tribology, lubricants, tribolayers, and simulation of wear.
Download or read book Mechanics of Fretting Fatigue written by D.A. Hills and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failures of many mechanical components in service result from fatigue. The cracks which grow may either originate from some pre-existing macroscopic defect, or, if the component is of high integrity but highly stressed, a region of localized stress concentration. In turn, such concentrators may be caused by some minute defect, such as a tiny inclusion, or inadvertent machining damage. Another source of surface damage which may exist between notionally 'bonded' components is associated with minute relative motion along the interface, brought about usually be cyclic tangential loading. Such fretting damage is quite insidious, and may lead to many kinds of problems such as wear, but it is its influence on the promotion of embryo cracks with which we are concerned here. When the presence of fretting is associated with decreased fatigue performance the effect is known as fretting fatigue. Fretting fatigue is a subject drawing equally on materials science and applied mechanics, but it is the intention in this book to concentrate attention entirely on the latter aspects, in a search for the quantification of the influence of fretting on both crack nucleation and propagation. There have been very few previous texts in this area, and the present volume seeks to cover five principal areas; (a) The modelling of contact problems including partial slip under tangentialloading, which produces the surface damage. (b) The modelling of short cracks by rigorous methods which deal effectively with steep stress gradients, kinking and closure. (c) The experimental simulation of fretting fatigue.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
