Download or read book Effects of Oxygen on the Growth Characteristics of Carbon Nanotubes on Conductive Substrates written by Ryan K. Bonaparte and published by . This book was released on 2009 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of oxygen on Fe-catalyzed carbon nanotube (CNT) growth on Ta substrates was studied. CNTs were grown on Fe thin-film catalysts deposited on silicon substrates via exposure to C2H4 in a thermal chemical vapor deposition (CVD) furnace. Heating for CVD growth causes the Fe film to dewet to form catalyst particles. During CVD, the sample was exposed to gas mixtures of Ar, Ar/O2, H2, and C2H4. Experiments were performed with varying amounts of oxygen from mixing of the Ar and Ar/O2 carrier gas, as well as pre-annealing samples in oxygen or hydrogen-rich environments. Samples were characterized via scanning electron microscopy (SEM) and atomic force microscopy (AFM). It was found that when an optimum amount of oxygen was introduced, taller CNT carpets were observed. Pre-annealing samples in an oxygenrich environment shows additional benefits in carpet growth. In contrast, pre-annealing in a hydrogen-rich environment counteracts the benefits of introducing oxygen during the growth phase. Coarsening of the catalyst particles was suspected as a reason for the difference in growth patterns, and pre-annealed sample morphologies were characterized without C2H4 flow. AFM scans show apparent coarsening in samples exposed to hydrogen-rich environments, and reduced coarsening in the samples exposed to oxygen-rich environments.
Download or read book The Effects of Local Chemistry on the Growth and Electronic Properties of Carbon Nanotubes written by Jason M. Simmons and published by . This book was released on 2006 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanomaterials written by Yury Gogotsi and published by CRC Press. This book was released on 2013-10-24 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on synthesis, properties, and applications of carbon nanomaterials. With novel materials, such as graphene (atomically flat carbon) or carbon onions (carbon nanospheres), the family of carbon nanomaterials is rapidly growing. This book provides a state-of-the-art overview and in-depth analysis of the most important ca
Download or read book Carbon Nanotubes written by M. Meyyappan and published by CRC Press. This book was released on 2004-07-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in the past five years. With a broad range of potential applications including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more moti
Download or read book Effects of Substrate Dimensions on the Growth of Carbon Nanotubes written by Lukas C. McMichael and published by . This book was released on 2003 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotubes written by Michael J. O’Connell and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Nanoengineered Nanofibrous Materials written by Selcuk Guceri and published by Springer Science & Business Media. This book was released on 2007-11-12 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of conductive polymer technology with the ability to produce nanofibres will facilitate major new developments in biotechnology and information technology, benefiting such areas as scaffolds for tissue engineering and drug delivery systems; wires, capacitors, transistors and diodes; sensor technology; biohazard protection; and energy transport, conversion and storage. The work on nanofibrous materials presented here is designed, first of all, to instruct scientists in the most advanced methods for the formation of nanofibres and nanotubes. The second section covers the physics and chemistry of nanofibres, while the third deals with computer simulation and modelling. The applications described in section 4 include biomedical applications, nanotube-based devices, electronic applications of nanotubes and nanofibres, nanofluidics, and composites. Finally, the fifth section discusses recent developments in nanomaterials, nanoparticles and nanostructures.
Download or read book Growth of Carbon Nanotubes on Metallic Substrates and Study of Their Interfacial Transport Properties written by Sunil K. Pal and published by ProQuest. This book was released on 2007 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Processes Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Processes—Advances in Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about ZZZAdditional Research in a concise format. The editors have built Chemical Processes—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Chemical Processes—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Carbon Nanotube Synthesis for Integrated Circuit Interconnects written by Gilbert Daniel Nessim and published by . This book was released on 2009 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) Growth of dense carpets of vertically-aligned CNTs on conductive substrates below 5000C: By focusing on the material properties of the catalyst and underlayer, we discovered important requirements for the underlayer grain structure evolution, as well as by preheating the incoming hydrocarbon gas, growth of dense and vertically aligned carpets of nanotubes on conductive underlayers at growth temperatures below 5000C could be achieved. Electrical characterization showed that we obtained ohmic contact between the CNTs and the substrate. Control of CNT crystallinity via gas preheating : We discovered that the time and temperature of gas preheating was critical for the crystallinity of the resulting CNTs. This was done by comparing the output gases from varying gas preheat treatments to the corresponding CNT structures. This allowed a discussion of the critical gas compounds responsible for growth of crystalline CNTs. Growth of CNTs into periodic insulating scaffolds on conductive substrates: We have grown CNTs on conductive substrates and in regularly-spaced pores of an insulating anodized alumina scaffold. This allowed simulation of an interconnect via system for future measurement of the electrical properties of CNTs. This structure can also serve as a starting point for future development of dense arrays of CNT-based devices.
Download or read book Carbon Nanotubes written by Stephanie Reich and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes are exceptionally interesting from a fundamental research point of view. Many concepts of one-dimensional physics have been verified experimentally such as electron and phonon confinement or the one-dimensional singularities in the density of states; other 1D signatures are still under debate, such as Luttinger-liquid behavior. Carbon nanotubes are chemically stable, mechanically very strong, and conduct electricity. For this reason, they open up new perspectives for various applications, such as nano-transistors in circuits, field-emission displays, artificial muscles, or added reinforcements in alloys. This text is an introduction to the physical concepts needed for investigating carbon nanotubes and other one-dimensional solid-state systems. Written for a wide scientific readership, each chapter consists of an instructive approach to the topic and sustainable ideas for solutions. The former is generally comprehensible for physicists and chemists, while the latter enable the reader to work towards the state of the art in that area. The book gives for the first time a combined theoretical and experimental description of topics like luminescence of carbon nanotubes, Raman scattering, or transport measurements. The theoretical concepts discussed range from the tight-binding approximation, which can be followed by pencil and paper, to first-principles simulations. We emphasize a comprehensive theoretical and experimental understanding of carbon nanotubes including - general concepts for one-dimensional systems - an introduction to the symmetry of nanotubes - textbook models of nanotubes as narrow cylinders - a combination of ab-initio calculations and experiments - luminescence excitation spectroscopy linked to Raman spectroscopy - an introduction to the 1D-transport properties of nanotubes - effects of bundling on the electronic and vibrational properties and - resonance Raman scattering in nanotubes.
Download or read book Rational Design of Multi Functional Nanomaterials written by Carlos Lodeiro and published by Frontiers Media SA. This book was released on 2019-08-16 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important issues, when a nanomaterial is designed, is to control the synthetic pathways to ensure the final desired product. A combination of dry and wet procedures, as well as chemical and physical methodologies, it is possible to successfully prepare new multifunctional nanomaterials, often as a result of multidisciplinary cooperation between chemists, physics, biologist, physicians, material engineers, etc. Drug delivery, environmental detection of contaminants, and many industrial applications directly rely on properties such as water solubility, permeability, cell penetration, shape control, and size of the monodispersed nanoparticle, among others. Functionalized nanomaterials play a crucial role in modern research areas because of their unique physical and chemical properties, explored in many different fields including medicine and biology, new materials, pharmacology as drug delivery systems, and in environmental analysis for sensing new contaminants, among other technical and industrial applications. For future technological applications, the rational design of these multifunctional nanomaterials is critical, and often depends on the excellent control of the organic and inorganic chemical reactions involved during production. The success of their applications relies directly on the photophysical properties created in the final material, including the emission of light or colorimetric responses, water solubility, selectivity, sensitivity, stability, etc. For example, from an analytical point of view, the detection and quantification of emerging analytes is directly dependent on the selectivity and sensitivity showed by the material in a complex media.
Download or read book Nanoscale Science and Technology written by Robert Kelsall and published by John Wiley & Sons. This book was released on 2005-11-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a vital new area of research and development addressing the control, modification and fabrication of materials, structures and devices with nanometre precision and the synthesis of such structures into systems of micro- and macroscopic dimensions. Future applications of nanoscale science and technology include motors smaller than the diameter of a human hair and single-celled organisms programmed to fabricate materials with nanometer precision. Miniaturisation has revolutionised the semiconductor industry by making possible inexpensive integrated electronic circuits comprised of devices and wires with sub-micrometer dimensions. These integrated circuits are now ubiquitous, controlling everything from cars to toasters. The next level of miniaturisation, beyond sub-micrometer dimensions into nanoscale dimensions (invisible to the unaided human eye) is a booming area of research and development. This is a very hot area of research with large amounts of venture capital and government funding being invested worldwide, as such Nanoscale Science and Technology has a broad appeal based upon an interdisciplinary approach, covering aspects of physics, chemistry, biology, materials science and electronic engineering. Kelsall et al present a coherent approach to nanoscale sciences, which will be invaluable to graduate level students and researchers and practising engineers and product designers.
Download or read book Fundamentals of Conjugated Polymer Blends Copolymers and Composites written by Parveen Saini and published by John Wiley & Sons. This book was released on 2015-04-30 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their discovery in 1977, the evolution of conducting polymers has revolutionized modern science and technology. These polymers enjoy a special status in the area of materials science yet they are not as popular among young readers or common people when compared to other materials like metals, paper, plastics, rubber, textiles, ceramics and composites like concrete. Most importantly, much of the available literature in the form of papers, specific review articles and books is targeted either at advanced readers (scientists / technologists / engineers / senior academicians) or for those who are already familiar with the topic (doctoral / postdoctoral scholars). For a beginner or even school / college students, such compilations are bit difficult to access / digest. In fact, they need proper introduction to the topic of conducting polymers including their discovery, preparation, properties, applications and societal impact, using suitable examples and already known principles/knowledge/phenomenon. Further, active participation of readers in terms of "question & answers", "fill-in-the-blanks", "numerical" along with suitable answer key is necessary to maintain the interest and to initiate the "thought process". The readers also need to know about the drawbacks and any hazards of such materials. Therefore, I believe that a comprehensive source on the science / technology of conducting polymers which maintains a link between grass root fundamentals and state-of-the-art R&D is still missing from the open literature.
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. - Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations - Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components - Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Nano Bio Electronic Photonic and MEMS Packaging written by C. P.(Ching-Ping) Wong and published by Springer Nature. This book was released on 2021-03-17 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how nanofabrication techniques and nanomaterials can be used to customize packaging for nano devices with applications to electronics, photonics, biological and biomedical research and products. It covers topics such as bio sensing electronics, bio device packaging, MEMS for bio devices and much more, including: Offers a comprehensive overview of nano and bio packaging and their materials based on their chemical and physical sciences and mechanical, electrical and material engineering perspectives; Discusses nano materials as power energy sources, computational analyses of nano materials including molecular dynamic (MD) simulations and DFT calculations; Analyzes nanotubes, superhydrophobic self-clean Lotus surfaces; Covers nano chemistry for bio sensor/bio material device packaging. This second edition includes new chapters on soft materials-enabled packaging for stretchable and wearable electronics, state of the art miniaturization for active implantable medical devices, recent LED packaging and progress, nanomaterials for recent energy storage devices such as lithium ion batteries and supercapacitors and their packaging. Nano- Bio- Electronic, Photonic and MEMS Packaging is the ideal book for all biomedical engineers, industrial electronics packaging engineers, and those engaged in bio nanotechnology applications research.
