Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance written by Richard Folkson and published by Woodhead Publishing. This book was released on 2022-07-27 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. - Provides a fully updated reference with significant technological advances and developments in the sector - Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements - Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry
Download or read book Burning a Wide Range of Fuels in Diesel Engines written by and published by . This book was released on 1967 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multifuel capabilities in diesel engines can reduce fuel costs while taking advantage of accessible fuel supplies. Of course, there are problems which accompany the use of different fuels in an engine brought about by the variations in the fuel characteristics, (e.g., viscosity, compressibility) and combustion, (e.g., fuel sprays, ignition delay). This collection of papers features 4 papers on combustion theory and 13 papers on solutions to multifuel engine problems. It is augmented by a summary paper by distinguished authors in the field and a bibliography of related papers not included in PT- 11.
Download or read book Diesel Combustion and Emissions written by Society of Automotive Engineers and published by . This book was released on 1981 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low temperature Combustion and Autoignition written by M.J. Pilling and published by Elsevier. This book was released on 1997-11-27 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion has played a central role in the development of our civilization which it maintains today as its predominant source of energy. The aim of this book is to provide an understanding of both fundamental and applied aspects of low-temperature combustion chemistry and autoignition. The topic is rooted in classical observational science and has grown, through an increasing understanding of the linkage of the phenomenology to coupled chemical reactions, to quite profound advances in the chemical kinetics of both complex and elementary reactions. The driving force has been both the intrinsic interest of an old and intriguing phenomenon and the centrality of its applications to our economic prosperity. The volume provides a coherent view of the subject while, at the same time, each chapter is self-contained.
Download or read book Gasoline Compression Ignition Technology written by Gautam Kalghatgi and published by Springer Nature. This book was released on 2022-01-17 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on gasoline compression ignition (GCI) which offers the prospect of engines with high efficiency and low exhaust emissions at a lower cost. A GCI engine is a compression ignition (CI) engine which is run on gasoline-like fuels (even on low-octane gasoline), making it significantly easier to control particulates and NOx but with high efficiency. The state of the art development to make GCI combustion feasible on practical vehicles is highlighted, e.g., on overcoming problems on cold start, high-pressure rise rates at high loads, transients, and HC and CO emissions. This book will be a useful guide to those in academia and industry.
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Advances in Compression Ignition Natural Gas Diesel Dual Fuel Engines written by Hongsheng Guo and published by Frontiers Media SA. This book was released on 2021-03-23 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal Use by the Nation s Railroads written by United States. Congress. Senate. Committee on Energy and Natural Resources. Subcommittee on Energy and Mineral Resources and published by . This book was released on 1984 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SAE Technical Paper Series written by and published by . This book was released on 1965 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Online version: Technical papers portion of the SAE Digital Library references thousands of SAE Technical Papers covering the latest advances and research in all areas of mobility engineering including ground vehicle, aerospace, off-highway, and manufacturing technology. Sample coverage includes fuels and lubricants, emissions, electronics, brakes, restraint systems, noise, engines, materials, lighting, and more. Your SAE service includes detailed summaries, complete documents in PDF, plus document storage and maintenance
Download or read book Practical Diesel Engine Combusion Analysis written by Bertrand Hsu and published by SAE International. This book was released on 2002-10-25 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The diesel engine is one of the most efficient types of heat engines and is widely used as a prime mover for many applications. In recent years, with the aid of modern computers, engine combustion modeling has made great progress. However, due to the complexities of the processes involved in the practical diesel engine, there are still too many unknowns preventing computational prediction to have the accuracy level required by industry. This book examines some basic characteristics of diesel engine combustion process, and describes the commonly used tool to analyze combustion - heat release analysis. It addition, Practical Diesel-Engine Combustion Analysis describes the performance changes that might be encountered in the engine user environment, with a goal of helping the reader analyze his own practical combustion problems. Chapters include: Combustion and Fuel-Injection Processes in the Diesel Engine Heat Release and its Effect on Engine Performance Alternate Fuels Combustion Analysis and more
Download or read book Pounder s Marine Diesel Engines and Gas Turbines written by Malcolm Latarche and published by Butterworth-Heinemann. This book was released on 2020-12-01 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pounder's Marine Diesel Engines and Gas Turbines, Tenth Edition, gives engineering cadets, marine engineers, ship operators and managers insights into currently available engines and auxiliary equipment and trends for the future. This new edition introduces new engine models that will be most commonly installed in ships over the next decade, as well as the latest legislation and pollutant emissions procedures. Since publication of the last edition in 2009, a number of emission control areas (ECAs) have been established by the International Maritime Organization (IMO) in which exhaust emissions are subject to even more stringent controls. In addition, there are now rules that affect new ships and their emission of CO2 measured as a product of cargo carried. - Provides the latest emission control technologies, such as SCR and water scrubbers - Contains complete updates of legislation and pollutant emission procedures - Includes the latest emission control technologies and expands upon remote monitoring and control of engines
Download or read book Alternative Diesel Fuels written by Daniel J Holt and published by SAE International. This book was released on 2004-01-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key topic of many technical discussions has been the development of alternative fuels to power the compression ignition engine. Reasons for this include the desire to reduce the dependency on petroleum-based fuel and, at the same time, to reduce the particulate matter (PM) and NOx emissions. Also, there has been interest generated in the diesel engine because of the reduction in greenhouse gases that has been proposed during the 2008-2012 time frame in Europe and the regulations that affect diesel engines in the United States.
Download or read book Simulations and Optical Diagnostics for Internal Combustion Engines written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2019-10-11 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on combustion simulations and optical diagnostics techniques, which are currently used in internal combustion engines. The book covers a variety of simulation techniques, including in-cylinder combustion, numerical investigations of fuel spray, and effects of different fuels and engine technologies. The book includes chapters focused on alternative fuels such as DEE, biomass, alcohols, etc. It provides valuable information about alternative fuel utilization in IC engines. Use of combustion simulations and optical techniques in advanced techniques such as microwave-assisted plasma ignition, laser ignition, etc. are few other important aspects of this book. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
Download or read book Diesel Engines Current Challenges and Future Perspectives written by Hasan Koten and published by BoD – Books on Demand. This book was released on 2024-05-22 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the current technology and future status of diesel engines. While gasoline engines are preferred for speed and jet engines, diesel engines are widely used in vehicles and machinery that require torque, such as ships, trains, tanks, unmanned ariel vehicles (UAVs), and heavy-duty vehicles. Some recent research on global climate change has focused on obtaining zero carbon, zero emissions, and decarbonization via clean combustion technologies. For this reason, restrictive emission regulations have forced engine manufacturers and research centers to turn to different technologies to achieve clean combustion in diesel engines. This book focuses on different combustion technologies, from artificial intelligence applications in diesel engines to alternative fuels. It discusses the roles of artificial intelligence in the design of diesel engines, the use of different fuels in diesel engines, and the effects of these on the performance and emission values of diesel engines. Solving the challenge of hydrogen storage in hydrogen-fed diesel engines will open a new era for internal combustion engines. In particular, the use of hydrogen fuel produced by the reaction of chemical ingredients with water in diesel engine cycles will have a significant impact on the industry. This book, which brings together the latest studies on clean combustion technologies, is an interesting resource for both industry and research centers.
Download or read book Journal of the Institution of Engineers India written by and published by . This book was released on 1996 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Medium Heavy Duty Diesel Engines written by Gus Wright and published by Jones & Bartlett Publishers. This book was released on 2015-12-16 with total page 1407 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Jones & Bartlett Learning CDX Automotive"--Cover
