Download or read book Effects of Microstructure Modification Induced by Laser Interference Patterning of Thin Films written by Rodolphe Catrin and published by . This book was released on 2012-07-13 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructure and Superlattice Effects on the Optical Properties of Ferroelectric Thin Films written by Jussi Hiltunen and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with the microstructure effects on the optical properties of (i) polycrystalline Nd-modified lead-zirkonium-titanate (PNZT) and (ii) highly oriented BaTiO3 (BTO) thin films together with the stacking structure influence on the optical properties of (iii) BaTiO3-SrTiO3 (STO) superlattice thin films. All the films were grown on MgO(001) substrates by pulsed laser deposition. Different structures were obtained by tuning the thin film processing conditions. PNZT thin films were deposited at room temperature and different crystallite size distributions were produced by varying the post-annealing temperature. The refractive index and electro-optic responses were found to increase with increasing mean crystallite size. Oxygen pressure during the film deposition at 700 °C was found to be a very critical parameter to modify the crystallographic and consequent other physical properties of BTO thin films as suggested by the dielectric and optical measurements. Low oxygen pressure films were epitaxial, with elongated lattice parameters along the surface normal, while increased working oxygen pressure produced non-epitaxial films with lattice elongation along the in-plane orientation. An effective electro-optic coefficient of ~21 pm/V was measured for the BTO films. Periodic BTO-STO superlattices were deposited with varying stacking periodicity between 27 and 1670 A. Birefringence decreased with increasing stacking periodicity, due to relaxation of the lattice strain induced by the layer interfaces. The electro-optic response was found to reach a maximum at a specific stacking periodicity and it decreases with both increasing and decreasing individual layer thickness. The operation of a Mach-Zehnder waveguide intensity modulator based on the BTO-STO superlattice with effective electro-optic coefficient of 73 pm/V was also demonstrated.
Download or read book Issues in Optics Light Laser Infrared and Photonic Technology 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Optics, Light, Laser, Infrared, and Photonic Technology: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Fluorescence. The editors have built Issues in Optics, Light, Laser, Infrared, and Photonic Technology: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Fluorescence in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Optics, Light, Laser, Infrared, and Photonic Technology: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Laser Processing of Thin Films and Microstructures written by Ian W Boyd and published by . This book was released on 1987-11-10 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser and Plasma induced Deposition Etching and Surface Modification of Thin Films written by Raghunath Padiyath and published by . This book was released on 1993 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Modification of Biomaterials written by Rui Vilar and published by Woodhead Publishing. This book was released on 2016-04-15 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Surface Modification of Biomaterials: Techniques and Applications covers this expanding field, which has many potential applications, including biomaterials. Laser surface modification of biomaterials enables the production of hybrid materials with different functionality in the bulk as well as the thin, sub-micrometer surface layer. This book will provide readers with a comprehensive review of the technology and its applications. Chapters in Part 1 look at the techniques and considerations of laser surface modification, while Part 2 reviews laser surface modification techniques of the most important classes of biomaterials, with a final set of chapters discussing application specific laser surface modification. - Offers a comprehensive review of laser surface modification techniques - Presents recent developments, fundamentals, and progress in laser surface modification - Reviews laser surface modification applications across a range of materials - Emphasizes applications in biomaterials
Download or read book Femtosecond Pulsed Laser Deposition and Patterning of Thin Films for MEMS written by Michael Joseph Stock and published by . This book was released on 2003 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Procedural variables such as fluence, polarization, pulse width, machining speed, and material properties are investigated to determine their effects on the PLD and laser micromachining of aluminum magnesium boride. In this work, a 120-fs pulsed, 800-nm wavelength Ti: Sapphire laser was used for micromachining thin films of ultra-hard AlMgB14 and polysilicon thin films on silicon substrate. Polysilicon was first deposited by low-pressure chemical vapor deposition followed by boride using femtosecond pulsed laser deposition. Channels were then machined in thin films to pattern a device that would produce a linear resistance/deflection curve. Results show that the ultrafast laser has precisely ablated the thin films. However, the high-energy fluence used in single-pass surface micromachining enabled the formation of recast layer of molten silicon substrate ejected by vapor pressure, and conglomerates of re-condensed material at a distance from the feature. Multi-pass surface micromachining at low energy fluences eliminated the recast layers and produced clean features. Ultrafast laser micromachining is certainly beneficial over wet and dry etching in reproducibility, material choice, and minimal number of processing steps. Thin films of ultra-hard AlMgB14 were grown on Si (100) substrates at 300 K using femtosecond pulsed Ti:sapphire laser and subsequently annealed in argon gas up to 1373 K for two hours. X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscope, and nanoindentation were employed to study the composition, microstructure and hardness of thin films. Results were compared with nanosecond pulsed KrF excimer laser-deposited films. The as-deposited and post-annealed films (up to 1173 K), independent of the pulse width, exhibited amorphous structures with a hardness of 40 GPa. However, post-annealing at higher temperatures has varied effects on crystallization depending on the pulse width. The effect of pulse width on the microstructure and quality of thin films is discussed.
Download or read book Polymer Surface Modification Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2007-05-11 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fifth International Symposium on this topic, held in Toronto. The book is divided into two parts: Part 1: Surface Modification Techniques; Part 2: Adhesion Improvement to Polymer Surfaces. Various ways to modify a host of polymer surfaces for a variety of purposes are covered in this book, with emphasis on latest developments. There is a tremendous current interest in devising new ways or ameliorating the existing techniques to modify polymer surfaces to attain desired characteristics because of its importance in a legion of technological areas, and all signals indicate that this interest will continue unabated. So this book should fill the need and should be a valuable addition to the literature.
Download or read book Wrinkled Polymer Surfaces written by C. M. González-Henríquez and published by Springer. This book was released on 2019-02-14 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in surface wrinkling, including current and future potential applications in biomedicine, tissue engineering, drug delivery, microfluidic devices, and other promising areas. Their use as templates, flexible electronics, and supports with controlled wettability and/or adhesion for biorelated applications demonstrate how the unique characteristics of wrinkled interfaces play a distinguishing and remarkable role. The fabrication approaches employed to induce wrinkle formation and the potential to fine-tune the amplitude and period of the wrinkles, their functionality, and their final morphology are thoroughly described. An overview of the main applications in which these buckled interfaces have already been employed or may have an impact in the near future is included. Presents a detailed description of the physical phenomena and strategies occurring at polymer surfaces to produce wrinkled surface patterns; Examines the different methodologies to produce morphology-controlled wrinkled surface patterns by means of physical and chemical treatment methods; Provides clear information on current and potential applications in flexible electronics and biomaterials, which are leading the use of these materials.
Download or read book Dewetting of Thin Films on Flexible Substrates Via Direct write Laser Exposure written by Anthony Jesus Ferrer and published by . This book was released on 2015 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) have enabled a wide variety of technologies both in the consumer space and in industrial/research areas. At the market level, such devices advance by the invention and innovation of production techniques. Additionally, there has been increased demand for flexible versions of such MEMS devices. Thin film patterning, represents a key technology for the realization of such flexible electronics. Patterns and methods that can be directly written into the thin film allow for design modification on the fly with the need for harsh chemicals and long etching steps. Laser-induced dewetting has the potential to create patterns in thin films at both the microscopic and nanoscopic level without wasting deposited material. This thesis presents the first demonstration of high-speed direct-write patterning of metallic thin films that uses a laser-induced dewetting phenomenon to prevent material loss. The ability to build film material with this technique is explored using various scanning geometries. Finally, demonstrations of direct-write dewetting of a variety of thin films will be presented with special consideration for high melting point metals deposited upon polymer substrates.
Download or read book Evolution of Thin Film Morphology written by Matthew Pelliccione and published by Springer Science & Business Media. This book was released on 2008-01-29 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is on modeling and simulations used in research on the morphological evolution during film growth. The authors emphasize the detailed mathematical formulation of the problem. The book will enable readers themselves to set up a computational program to investigate specific topics of interest in thin film deposition. It will benefit those working in any discipline that requires an understanding of thin film growth processes.
Download or read book Laser Induced Damage In Optical Materials 1981 written by Harold E. Bennett and published by ASTM International. This book was released on 1983 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage in Optical Materials written by and published by . This book was released on 1983 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage in Optical Materials 1981 written by and published by . This book was released on 1983 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Laser Ablation written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2016-12-21 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser ablation refers to the phenomenon in which a low wavelength and short pulse (ns-fs) duration of laser beam irradiates the surface of a target to induce instant local vaporization of the target material generating a plasma plume consisting of photons, electrons, ions, atoms, molecules, clusters, and liquid or solid particles. This book covers various aspects of using laser ablation phenomenon for material processing including laser ablation applied for the deposition of thin films, for the synthesis of nanomaterials, and for the chemical compositional analysis and surface modification of materials. Through the 18 chapters written by experts from international scientific community, the reader will have access to the most recent research and development findings on laser ablation through original research studies and literature reviews.
Download or read book Handbook of Laser Micro and Nano Engineering written by KOJI SUGIOKA. and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a comprehensive review of the entire field of laser micro and nano processing, including not only a detailed introduction to individual laser processing techniques but also the fundamentals of laser-matter interaction and lasers, optics, equipment, diagnostics, as well as monitoring and measurement techniques for laser processing. Consisting of 11 sections, each composed of 4 to 6 chapters written by leading experts in the relevant field. Each main part of the handbook is supervised by its own part editor(s) so that high-quality content as well as completeness are assured. The book provides essential scientific and technical information to researchers and engineers already working in the field as well as students and young scientists planning to work in the area in the future. Lasers found application in materials processing practically since their invention in 1960, and are currently used widely in manufacturing. The main driving force behind this fact is that the lasers can provide unique solutions in material processing with high quality, high efficiency, high flexibility, high resolution, versatility and low environmental load. Macro-processing based on thermal process using infrared lasers such as CO2 lasers has been the mainstream in the early stages, while research and development of micro- and nano-processing are becoming increasingly more active as short wavelength and/or short pulse width lasers have been developed. In particular, recent advances in ultrafast lasers have opened up a new avenue to laser material processing due to the capabilities of ultrahigh precision micro- and nanofabrication of diverse materials. This handbook is the first book covering the basics, the state-of-the-art and important applications of the dynamic and rapidly expanding discipline of laser micro- and nanoengineering. This comprehensive source makes readers familiar with a broad spectrum of approaches to solve all relevant problems in science and technology. This handbook is the ultimate desk reference for all people working in the field.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
