Download or read book Applications of Circulation Control Technologies written by Ronald Douglas Joslin and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2006 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on papers from the 2004 NASA/ONR Circulation Control Workshop, this collection is an invaluable, one-of-a-kind resource on the state of the art in circulation control technologies and applications. Filling the information gap between 1986 -- when the last such symposium was held -- and today, it summarizes the applications, experiments, computations and theories related to circulation control, emphasizing fundamental physics, systems analysis and applied research. The papers presented cover a wide variety of aerodynamic and hydrodynamic applications including naval vehicles, fixed-wing aviation, V/STOL platforms, propulsion systems and ground vehicles. Anyone with interests in applied aerodynamics, fluid mechanics and aircraft design will find this book of particular value, as will those seeking a an up-to-date reference work on circulation control and its many current applications.
Download or read book Lift Generation on a Circular Cylinder by Tangential Blowing from Surface Slots written by Vernard E. Lockwood and published by . This book was released on 1960 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerodynamics Aeronautics and Flight Mechanics written by Barnes W. McCormick and published by John Wiley & Sons. This book was released on 1994-09-28 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Edition of the Most Effective Text/Reference in the Field! Aerodynamics, Aeronautics, and Flight Mechanics, Second Edition Barnes W. McCormick, Pennsylvania State University 57506-2 When the first edition of Aerodynamics, Aeronautics, and Flight Mechanics was published, it quickly became one of the most important teaching and reference tools in the field. Not only did generations of students learn from it, they continue to use it on the job-the first edition remains one of the most well-thumbed guides you'll find in an airplane company. Now this classic text/reference is available in a bold new edition. All new material and the interweaving of the computer throughout make the Second Edition even more practical and current than before! A New Edition as Complete and Applied as the First Both analytical and applied in nature, Aerodynamics, Aeronautics, and Flight Mechanics presents all necessary derivations to understand basic principles and then applies this material to specific examples. You'll find complete coverage of the full range of topics, from aerodynamics to propulsion to performance to stability and control. Plus, the new Second Edition boasts the same careful integration of concepts that was an acclaimed feature of the previous edition. For example, Chapters 9, 10, and 11 give a fully integrated presentation of static, dynamic, and automatic stability and control. These three chapters form the basis of a complete course on stability and control. New Features You'll Find in the Second Edition * A new chapter on helicopter and V/STOL aircraft- introduces a phase of aerodynamics not covered in most current texts * Even more material than the previous edition, including coverage of stealth airplanes and delta wings * Extensive use of the computer throughout- each chapter now contains several computer exercises * A computer disk with programs written by the author is available
Download or read book Flight Stability and Automatic Control written by Robert C. Nelson and published by . This book was released on 1998 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of this this flight stability and controls guide features an unintimidating math level, full coverage of terminology, and expanded discussions of classical to modern control theory and autopilot designs. Extensive examples, problems, and historical notes, make this concise book a vital addition to the engineer's library.
Download or read book Low Speed Wind Tunnel Testing written by Jewel B. Barlow and published by John Wiley & Sons. This book was released on 1999-02-22 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brand-new edition of the classic guide on low-speed wind tunnel testing While great advances in theoretical and computational methods have been made in recent years, low-speed wind tunnel testing remains essential for obtaining the full range of data needed to guide detailed design decisions for many practical engineering problems. This long-awaited Third Edition of William H. Rae, Jr.'s landmark reference brings together essential information on all aspects of low-speed wind tunnel design, analysis, testing, and instrumentation in one easy-to-use resource. Written by authors who are among the most respected wind tunnel engineers in the world, this edition has been updated to address current topics and applications, and includes coverage of digital electronics, new instrumentation, video and photographic methods, pressure-sensitive paint, and liquid crystal-based measurement methods. The book is organized for quick access to topics of interest, and examines basic test techniques and objectives of modeling and testing aircraft designs in low-speed wind tunnels, as well as applications to fluid motion analysis, automobiles, marine vessels, buildings, bridges, and other structures subject to wind loading. Supplemented with real-world examples throughout, Low-Speed Wind Tunnel Testing, Third Edition is an indispensable resource for aerospace engineering students and professionals, engineers and researchers in the automotive industries, wind tunnel designers, architects, and others who need to get the most from low-speed wind tunnel technology and experiments in their work.
Download or read book The Grand Designers written by John D. Anderson Jr and published by Cambridge University Press. This book was released on 2018-03-22 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The airplane has experienced phenomenal advancement in the twentieth century, changing at an exponential rate from the Wright brothers to the present day. In this ground breaking work based on new research, Dr John D. Anderson, Jr, a curator at the National Air and Space Museum, analyzes the historical development of the conceptual design process of the airplane. He aims to answer the question of whether airplane advancement has been driven by a parallel advancement in the intellectual methodology of conceptual airplane design. In doing so, Anderson identifies and examines six case histories of 'grand designers' in this field, and challenges some of the preconceived notions of how the intellectual methodology of conceptual airplane design advanced. Filled with over one hundred illustrations which bring his words to life, Anderson unfolds the lives and thoughts of these grand designers.
Download or read book Aeroacoustics of Flight Vehicles written by Harvey H. Hubbard and published by . This book was released on 1991 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Summary of Low Speed Airfoil Data written by Michael S. Selig and published by Soartech. This book was released on 1995 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laminar Flow Control Technology written by and published by . This book was released on 1979 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic and High Temperature Gas Dynamics written by John David Anderson and published by AIAA. This book was released on 1989 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained text for those students and readers interested in learning hypersonic flow and high-temperature gas dynamics. It assumes no prior familiarity with either subject on the part of the reader. If you have never studied hypersonic and/or high-temperature gas dynamics before, and if you have never worked extensively in the area, then this book is for you. On the other hand, if you have worked and/or are working in these areas, and you want a cohesive presentation of the fundamentals, a development of important theory and techniques, a discussion of the salient results with emphasis on the physical aspects, and a presentation of modern thinking in these areas, then this book is also for you. In other words, this book is designed for two roles: 1) as an effective classroom text that can be used with ease by the instructor, and understood with ease by the student; and 2) as a viable, professional working tool for engineers, scientists, and managers who have any contact in their jobs with hypersonic and/or high-temperature flow.
Download or read book On Subscale Flight Testing written by Alejandro Sobron and published by Linköping University Electronic Press. This book was released on 2018-11-05 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downscaled physical models, also referred to as subscale models, have played an essential role in the investigation of the complex physics of flight until the recent disruption of numerical simulation. Despite the fact that improvements in computational methods are slowly pushing experimental techniques towards a secondary role as verification or calibration tools, real-world testing of physical prototypes still provides an unmatched confidence. Physical models are very effective at revealing issues that are sometimes not correctly identified in the virtual domain, and hence can be a valuable complement to other design tools. But traditional wind-tunnel testing cannot always meet all of the requirements of modern aeronautical research and development. It is nowadays too expensive to use these scarce facilities to explore different design iterations during the initial stages of aircraft development, or to experiment with new and immature technologies. Testing of free-flight subscale models, referred to as Subscale Flight Testing (SFT), could offer an affordable and low-risk alternative for complementing conventional techniques with both qualitative and quantitative information. The miniaturisation of mechatronic systems, the advances in rapid-prototyping techniques and power storage, as well as new manufacturing methods, currently enable the development of sophisticated test objects at scales that were impractical some decades ago. Moreover, the recent boom in the commercial drone industry has driven a quick development of specialised electronics and sensors, which offer nowadays surprising capabilities at competitive prices. These recent technological disruptions have significantly altered the cost-benefit function of SFT and it is necessary to re-evaluate its potential in the contemporary aircraft development context. This thesis aims to increase the comprehension and knowledge of the SFT method in order to define a practical framework for its use in aircraft design; focusing on low-cost, short-time solutions that don’t require more than a small organization and few resources. This objective is approached from a theoretical point of view by means of an analysis of the physical and practical limitations of the scaling laws; and from an empirical point of view by means of field experiments aimed at identifying practical needs for equipment, methods, and tools. A low-cost data acquisition system is developed and tested; a novel method for semi-automated flight testing in small airspaces is proposed; a set of tools for analysis and visualisation of flight data is presented; and it is also demonstrated that it is possible to explore and demonstrate new technology using SFT with a very limited amount of economic and human resources. All these, together with a theoretical review and contextualisation, contribute to increasing the comprehension and knowledge of the SFT method in general, and its potential applications in aircraft conceptual design in particular.
Download or read book NASA Conference Publication written by and published by . This book was released on 1977 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theoretical and Applied Aerodynamics written by J. J. Chattot and published by Springer. This book was released on 2016-10-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers classical and modern aerodynamics, theories and related numerical methods, for senior and first-year graduate engineering students, including: -The classical potential (incompressible) flow theories for low speed aerodynamics of thin airfoils and high and low aspect ratio wings. - The linearized theories for compressible subsonic and supersonic aerodynamics. - The nonlinear transonic small disturbance potential flow theory, including supercritical wing sections, the extended transonic area rule with lift effect, transonic lifting line and swept or oblique wings to minimize wave drag. Unsteady flow is also briefly discussed. Numerical simulations based on relaxation mixed-finite difference methods are presented and explained. - Boundary layer theory for all Mach number regimes and viscous/inviscid interaction procedures used in practical aerodynamics calculations. There are also four chapters covering special topics, including wind turbines and propellers, airplane design, flow analogies and hypersonic (rotational) flows. A unique feature of the book is its ten self-tests and their solutions as well as an appendix on special techniques of functions of complex variables, method of characteristics and conservation laws and shock waves. The book is the culmination of two courses taught every year by the two authors for the last two decades to seniors and first-year graduate students of aerospace engineering at UC Davis.
Download or read book Probing the Sky written by Curtis Peebles and published by . This book was released on 2014-12-10 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the development of supersonic aircraft, the X-plane era ushered in a new and challenging phase of flight. Researchers found that much of the knowledge accumulated from the previous, subsonic flight era did not apply to the emerging supersonic aircraft. These turbojet-powered planes also outpaced the usefulness of the wind tunnel, previously an indispensible tool of aeronautic research.This book explores the development of the X-series research aircraft, the planes that helped bridge the gap between subsonic flight and hypersonic flight.
Download or read book Aerodynamics of Wings and Bodies written by Holt Ashley and published by Courier Corporation. This book was released on 1965-01-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent, innovative reference offers a wealth of useful information and a solid background in the fundamentals of aerodynamics. Fluid mechanics, constant density inviscid flow, singular perturbation problems, viscosity, thin-wing and slender body theories, drag minimalization, and other essentials are addressed in a lively, literate manner and accompanied by diagrams.
Download or read book Three Dimensional Flow in the Root Region of Wind Turbine Rotors written by Galih Bangga and published by kassel university press GmbH. This book was released on 2018-06-20 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in the analyses of three-dimensional flow over rotating wind turbine blades. Systematic studies for wind turbine rotors with different sizes were carried out numerically employing three different simulation approaches, namely the Euler, URANS and DDES methods. The main mechanisms of the lift augmentation in the blade inboard region are described in detail. The physical relations between the inviscid and viscous effects are presented and evaluated, emphasizing the influence of the flow curvature on the resulting pressure distributions. Detailed studies concerning the lift augmentation for large wind turbine rotors are considered as thick inboard airfoils characterized by massive separation are desired to stronger contribute to power production. Special attention is given to the analyses of wind turbine loads and flow field that can be helpful for the interpretation of the occurring physical phenomena. The book is aimed at students, researchers, engineers and physicists dealing with wind engineering problems, but also for a wider audience involved in flow computations.
Download or read book Parachute Recovery Systems written by Theo W. Knacke and published by . This book was released on 1992 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide recovery system engineers in government and industry with tools to evaluate, analyze, select, and design parachute recovery systems. These systems range from simple, one-parachute assemblies to multiple-parachute systems, and may include equipment for impact attenuation, flotation, location, retrieval, and disposition. All system aspects are discussed, including the need for parachute recovery, the selection of the most suitable recovery system concept, concept analysis, parachute performance, force and stress analysis, material selection, parachute assembly and component design, and manufacturing. Experienced recovery system engineers will find this publication useful as a technical reference book; recent college graduates will find it useful as a textbook for learning about parachutes and parachute recovery systems; and technicians with extensive practical experience will find it useful as an engineering textbook that includes a chapter on parachute- related aerodynamics. In this manual, emphasis is placed on aiding government employees in evaluating and supervising the design and application of parachute systems. The parachute recovery system uses aerodynamic drag to decelerate people and equipment moving in air from a higher velocity to a lower velocity and to a safe landing. This lower velocity is known as rate of descent, landing velocity, or impact velocity, and is determined by the following requirements: (1) landing personnel uninjured and ready for action, (2) landing equipment and air vehicles undamaged and ready for use or refurbishment, and (3) impacting ordnance at a preselected angle and velocity.
