Download or read book Effects of Ground Granulated Blast Furnace Slag in Portland Cement Concrete written by Irene K. LaBarca and published by . This book was released on 2007 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research examined the properties of concrete containing grade 120 slag cement at replacement levels of 0%, 30%, and 50%. The primary concrete properties studied were compressive strength, split-tensile strength, and deicer scaling resistance. Material variations included four sources of ordinary portland cement and two types of coarse aggregate. Strength properties were studied at room temperature and 40°F mix and curing conditions. Deicer scaling resistance was studied for concrete cured under six curing conditions. Carbonation of concrete cured under these six conditions was also investigated.
Download or read book Effects of Ground Granulated Blast Furnace Slag in Portland Cement Concrete written by Nicholas Robert Mason and published by . This book was released on 2003 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Materials and By Products in Concrete written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.
Download or read book CIGOS 2019 Innovation for Sustainable Infrastructure written by Cuong Ha-Minh and published by Springer. This book was released on 2020-10-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected articles from the 5th International Conference on Geotechnics, Civil Engineering Works and Structures, held in Ha Noi, focusing on the theme “Innovation for Sustainable Infrastructure”, aiming to not only raise awareness of the vital importance of sustainability in infrastructure development but to also highlight the essential roles of innovation and technology in planning and building sustainable infrastructure. It provides an international platform for researchers, practitioners, policymakers and entrepreneurs to present their recent advances and to exchange knowledge and experience on various topics related to the theme of “Innovation for Sustainable Infrastructure”.
Download or read book Effect of Ground Granulated Blast Furnace Slag on the Performance of Concrete Produced with Variations in Cement Brand and Aggregate written by Chad Sippel and published by . This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Cold Weather Concreting written by ACI Committee 306 and published by . This book was released on 2010-10 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.
Download or read book 3rd International Conference on the Application of Superabsorbent Polymers SAP and Other New Admixtures Towards Smart Concrete written by William P. Boshoff and published by Springer Nature. This book was released on 2019-11-20 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gathers the peer-reviewed contributions presented at the 3rd International Conference on Application of Superabsorbent Polymers (SAP) and Other New Admixtures towards Smart Concrete, held in Skukuza, South Africa, on November 25-27, 2019. It features papers focusing on the behavior of SAP in concrete (in particular the absorption behavior) as well as the effect of SAP on fresh and hardened concrete properties. It also covers topics such as other modern admixtures, in particular rheology-modifying admixtures, including the recently emerging field of bio- or waste-derived admixtures. The conference builds on the experience and summarizes the activities of the RILEM Technical Committee 260-RSC "Recommendations for Use of Superabsorbent Polymers in Concrete Construction" and addresses other prominent research activities in the field of concrete admixtures.
Download or read book Applied Petroleum Geomechanics written by Jon Jincai Zhang and published by Gulf Professional Publishing. This book was released on 2019-06-15 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Petroleum Geomechanics provides a bridge between theory and practice as a daily use reference that contains direct industry applications. Going beyond the basic fundamentals of rock properties, this guide covers critical field and lab tests, along with interpretations from actual drilling operations and worldwide case studies, including abnormal formation pressures from many major petroleum basins. Rounding out with borehole stability solutions and the geomechanics surrounding hydraulic fracturing and unconventional reservoirs, this comprehensive resource gives petroleum engineers a much-needed guide on how to tackle today’s advanced oil and gas operations. Presents methods in formation evaluation and the most recent advancements in the area, including tools, techniques and success stories Bridges the gap between theory of rock mechanics and practical oil and gas applications Helps readers understand pore pressure calculations and predictions that are critical to shale and hydraulic activity
Download or read book Supplementary Cementing Materials written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2011-03-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to consolidate the published research related to the use of Supplementary Cementing Materials in cement and concrete. It comprises of five chapters. Each chapter is devoted to a particular supplementing cementing material. It is based on the literature/research findings published in journals/conference proceeding, etc. Topics covered in the book are; coal fly ash, silica fume (SF), granulated blast furnace slag (GGBS), metakaolin (MK), and rice husk ash (RHA). Each chapter contains introduction, properties of the waste material/by-product, its potential usage, and its effect on the properties of fresh and hardened concrete and other cement based materials.
Download or read book Significance of Tests and Properties of Concrete and Concrete making Materials written by Joseph F. Lamond and published by ASTM International. This book was released on 2006 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste and Supplementary Cementitious Materials in Concrete written by Rafat Siddique and published by Woodhead Publishing. This book was released on 2018-06-05 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste and Supplementary Cementitious Materials in Concrete: Characterisation, Properties and Applications provides a state-of-the-art review of the effective and efficient use of these materials in construction. Chapters focus on a specific type of material, addressing their characterization, strength, durability and structural applications. Sections include discussions of the properties of materials, including their physical, chemical and characterization, their strength and durability, modern engineering applications, case studies, the state of codes and standards of implementation, cost considerations, and the role of materials in green and sustainable construction. The book concludes with a discussion of research needs. Focuses on material properties and applications (as well as ‘sustainability’ aspects) of cementitious materials Assembles leading researchers from diverse areas of study Ideas for use as a ‘one stop’ reference for advanced postgraduate courses focusing on sustainable construction materials
Download or read book The Utilization of Slag in Civil Infrastructure Construction written by George C. Wang and published by Woodhead Publishing. This book was released on 2016-06-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Utilization of Slag in Civil Infrastructure Construction strives to integrate the theory, research, and practice of slag utilization, including the production and processing of slags. The topics covered include: production and smelting processes for metals; chemical and physical properties of slags; pretreatment and post-treatment technology to enhance slag properties; potential environmental impact; mechanisms of potential expansion; special testing methods and characteristics; slag processing for aggregate and cementitious applications; suitability of slags for use in specific applications; overall properties of materials containing slags; and commercialization and economics. The focus of the book is on slag utilization technology, with a review of the basic properties and an exploration of how its use in the end product will be technically sound, environment-friendly, and economic. Covers the production, processing, and utilization of a broad range of ferrous, non-ferrous, and non-metallurgical slags Provides information on applicable methods for a particular slag and its utilization to reduce potential environmental impacts and promote natural resource sustainability Presents the overall technology of transferring a slag from the waste stream into a useful materials resource Provides a detailed review of the appropriate utilization of each slag from processing right through to aggregate and cementitious use requirements
Download or read book Characteristics and Uses of Steel Slag in Building Construction written by Ivanka Netinger Grubeša and published by Woodhead Publishing. This book was released on 2016-05-20 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characteristics and Uses of Steel Slag in Building Construction focuses predominantly on the utilization of ferrous slag (blast furnace and steel slag) in building construction. This extensive literature review discusses the worldwide utilization of ferrous slag and applications in all sectors of civil engineering, including structural engineering, road construction, and hydro-technical structures. It presents cutting-edge research on the characteristics and properties of ferrous slag, and its overall impact on the environment. Comprehensively reviews the literature on the use of blast furnace and steel slag in civil engineering Examines the environmental impact of slag production and its effect on human health Presents cutting-edge research from worldwide studies on the use of blast furnace and steel slag
Download or read book Eco efficient concrete written by İ.B. Topçu and published by Elsevier Inc. Chapters. This book was released on 2013-02-04 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground granulated blast furnace slag (GGBFS) is a by-product of the iron-making process and because of its high calcium silicate content it has excellent cementious content and has been used in the construction industry for years as a replacement for ordinary Portland cement (OPC). GGBFS is also routinely used to limit the temperature rise in large concrete pours and is therefore a desirable material to use in mass concrete placements where control of temperatures is an issue. The more gradual hydration of GGBS cement generates both lower peak and less total overall heat than OPC. GGBFS was approved for use at a 70% replacement even though it is only allowed to use a maximum 25% instead of cement. It has a higher proportion of the strength-enhancing calcium silicate hydrates (CSH) than concrete made with only OPC, and a reduced content of free lime, which does not contribute to concrete strength.
Download or read book Alkali Activated Cements and Concretes written by Caijun Shi and published by CRC Press. This book was released on 2006-05-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first English-language book which reviews and summarizes worldwide research advances in alkali-activated cements and concrete. Essential topics include: raw materials and their properties for the production of the two new types of binder the hydration and microstructure development of alkali-activated slag cements the mechanical properties and durability of alkali-activated slag cement and concrete other various cementing systems and their applications related standards and specifications. This respected team of authors has produced an important piece of research that will be of great interest to professionals and academics alike, enabling the production of more durable and environmentally sensitive materials.
Download or read book Investigation of Portland Blast furnace Slag Cements written by Bryant Mather and published by . This book was released on 1965 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
