Download or read book Modelling Fluid Flow written by János Vad and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling Fluid Flow presents invited lectures, workshop summaries and a selection of papers from a recent international conference CMFF '03 on fluid technology. The lectures follow the current evolution and the newest challenges of the computational methods and measuring techniques related to fluid flow. The workshop summaries reflect the recent trends, open questions and unsolved problems in the mutually inspiring fields of experimental and computational fluid mechanics. The papers cover a wide range of fluids engineering, including reactive flow, chemical and process engineering, environmental fluid dynamics, turbulence modelling, numerical methods, and fluid machinery.
Download or read book Micro Macro Interactions written by Albrecht Bertram and published by Springer Science & Business Media. This book was released on 2008-10-23 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many materials or media in nature and technology possess a microstructure which determines their macroscopic behaviour. The knowledge of the relevant mechanisms is often more comprehensive on the micro than on the macro scale. On the other hand, not all information on the micro level is relevant for the understanding of this macro behaviour. Therefore, averaging and homogenization methods are needed to select only the specific information from the micro scale, which influences the macro scale. These methods also open the possibility to design or to influence microstructures with the objective to optimize their macro behaviour. This book presents the development of new methods in this interdisciplinary field of macro- micro-interactions of different engineering branches like mechanical and process engineering, applied mathematics, theoretical, and computational physics. In particular, solids with microstructures and particle systems are considered.
Download or read book Fluid Mechanics written by Franz Durst and published by Springer Science & Business Media. This book was released on 2008-09-01 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid mechanics embraces engineering, science, and medicine. This book’s logical organization begins with an introductory chapter summarizing the history of fluid mechanics and then moves on to the essential mathematics and physics needed to understand and work in fluid mechanics. Analytical treatments are based on the Navier-Stokes equations. The book also fully addresses the numerical and experimental methods applied to flows. This text is specifically written to meet the needs of students in engineering and science. Overall, readers get a sound introduction to fluid mechanics.
Download or read book Bubbly Flows written by Martin Sommerfeld and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarises the outcom of a priority research programme: 'Analysis, Modelling and Computation of Multiphase Flows'. The results of 24 individual research projects are presented. The main objective of the research programme was to provide a better understanding of the physical basis for multiphase gas-liquid flows as they are found in numerous chemical and biochemical reactors. The research comprises steady and unsteady multiphase flows in three frequently found reactor configurations, namely bubble columns without interiors, airlift loop reactors, and aerated stirred vessels. For this purpose new and improved measurement techniques were developed. From the resulting knowledge and data, new and refined models for describing the underlying physical processes were developed, which were used for the establishment and improvement of analytic as well as numerical methods for predicting multiphase reactors. Thereby, the development, lay-out and scale-up of such processes should be possible on a more reliable basis.
Download or read book The Role of Cavitation in Mechanical Failures written by Mechanical Failures Prevention Group and published by . This book was released on 1974 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Thermofluids written by Mahmoud Massoud and published by Springer Science & Business Media. This book was released on 2005-09-16 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermofluids, while a relatively modern term, is applied to the well-established field of thermal sciences, which is comprised of various intertwined disciplines. Thus mass, momentum, and heat transfer constitute the fundamentals of th- mofluids. This book discusses thermofluids in the context of thermodynamics, single- and two-phase flow, as well as heat transfer associated with single- and two-phase flows. Traditionally, the field of thermal sciences is taught in univer- ties by requiring students to study engineering thermodynamics, fluid mechanics, and heat transfer, in that order. In graduate school, these topics are discussed at more advanced levels. In recent years, however, there have been attempts to in- grate these topics through a unified approach. This approach makes sense as thermal design of widely varied systems ranging from hair dryers to semicond- tor chips to jet engines to nuclear power plants is based on the conservation eq- tions of mass, momentum, angular momentum, energy, and the second law of thermodynamics. While integrating these topics has recently gained popularity, it is hardly a new approach. For example, Bird, Stewart, and Lightfoot in Transport Phenomena, Rohsenow and Choi in Heat, Mass, and Momentum Transfer, El- Wakil, in Nuclear Heat Transport, and Todreas and Kazimi in Nuclear Systems have pursued a similar approach. These books, however, have been designed for advanced graduate level courses. More recently, undergraduate books using an - tegral approach are appearing.
Download or read book Computational Engineering Introduction to Numerical Methods written by Michael Schäfer and published by Springer Nature. This book was released on 2021-07-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation methods in all engineering disciplines gains more and more importance. The successful and efficient application of such tools requires certain basic knowledge about the underlying numerical techniques. The text gives a practice-oriented introduction in modern numerical methods as they typically are applied in mechanical, chemical, or civil engineering. Problems from heat transfer, structural mechanics, and fluid mechanics constitute a thematical focus of the text. For the basic understanding of the topic aspects of numerical mathematics, natural sciences, computer science, and the corresponding engineering area are simultaneously important. Usually, the necessary information is distributed in different textbooks from the individual disciplines. In the present text the subject matter is presented in a comprehensive multidisciplinary way, where aspects from the different fields are treated insofar as it is necessary for general understanding. Overarching aspects and important questions related to accuracy, efficiency, and cost effectiveness are discussed. The topics are presented in an introductory manner, such that besides basic mathematical standard knowledge in analysis and linear algebra no further prerequisites are necessary. The book is suitable either for self-study or as an accompanying textbook for corresponding lectures. It can be useful for students of engineering disciplines as well as for computational engineers in industrial practice.
Download or read book Fluid Machinery and Fluid Mechanics written by Jianzhong Xu and published by Springer Science & Business Media. This book was released on 2010-07-05 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE)" is the proceedings of 4th International Symposium on Fluid Machinery and Fluid Engineering, held in Beijing November 24-27, 2008. It contains 69 highly informative technical papers presented at the Mei Lecture session and the technical sessions of the symposium. The Chinese Society of Engineering Thermophysics (CSET) organized the First, the Second and the Third International Symposium on Fluid Machinery and Fluid Engineering (1996, 2000 and 2004). The purpose of the 4th Symposium is to provide a common forum for exchange of scientific and technical information worldwide on fluid machinery and fluid engineering for scientists and engineers. The main subject of this symposium is "Fluid Machinery for Energy Conservation". The "Mei Lecture" reports on the most recent developments of fluid machinery in commemoration of the late professor Mei Zuyan. The book is intended for researchers and engineers in fluid machinery and fluid engineering. Jianzhong Xu is a professor at the Chinese Society of Engineering Thermophysics, Chinese Academy of Sciences, Beijing.
Download or read book Airframe and Powerplant Mechanics Airframe Handbook written by United States. Flight Standards Service and published by . This book was released on 1976 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operation of Wastewater Treatment Plants written by and published by . This book was released on 2004 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotodynamic Pumps Centrifugal and Axial written by K. M. Srinivasan and published by New Age International. This book was released on 2008 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifugal Materials Processing written by Liya L. Regel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is not good to have zeal without knowledge • . . . Book of Proverbs This volume constitutes the proceedings of the Third International Workshop on Materials Processing at High Gravity. It offers the latest results in a new field with immense potential for commercialization, making this book a vital resource for research and development professionals in industry, academia and government. We have titled the proceedings Centrifugal Materials Processing to emphasize that centrifugation causes more than an increase in acceleration. It also introduces the Coriolis force and a gradient of acceleration, both of which have been discovered to play important roles in materials processing. The workshop was held June 2-8, 1996 on the campus of Clarkson University in Potsdam, New York, under the sponsorship of Corning Corporation and the International Center for Gravity Materials Science and Applications. The meeting was very productive and exciting, with energetic discussions of the latest discoveries in centrifugal materials processing, continuing the atmosphere of the first workshop held in 1991 at Dubna (Russia) and the second workshop held in 1993 in Potsdam, New York. Results and research plans were presented for a wide variety of centrifugal materials processing, including directional solidification of semiconductors, crystallization of high Tc superconductors, growth of diamond thin films, welding, alloy casting, solution behavior and growth, protein crystal growth, polymerization, and flow behavior. Also described were several centrifuge facilities that have been constructed for research, with costs beginning at below $1000.
Download or read book Introduction to Basic Manufacturing Processes and Workshop Technology written by Rajender Singh and published by New Age International. This book was released on 2006-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and workshop practices have become important in the industrial environment to produce products for the service of mankind. The basic need is to provide theoretical and practical knowledge of manufacturing processes and workshop technology to all the engineering students. This book covers most of the syllabus of manufacturing processes/technology, workshop technology and workshop practices for engineering (diploma and degree) classes prescribed by different universities and state technical boards.
Download or read book Automotive Mechatronics written by Konrad Reif and published by Springer. This book was released on 2014-08-25 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of automotive vehicles increases this book presents operational and practical issues of automotive mechatronics. It is a comprehensive introduction to controlled automotive systems and provides detailed information of sensors for travel, angle, engine speed, vehicle speed, acceleration, pressure, temperature, flow, gas concentration etc. The measurement principles of the different sensor groups are explained and examples to show the measurement principles applied in different types.
Download or read book Solid State Fermentation Bioreactors written by David A. Mitchell and published by Springer Science & Business Media. This book was released on 2006-08-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise professional reference provides a fundamental framework for the design and operation of solid-state fermentation bioreactors, enabling researchers currently working at laboratory scale to scale up their processes. The authors survey bioreactor types in common use, and describe in depth how to plan a project, and model heat transfer phenomena. The book includes case studies, and a review of practical issues involved in bioreactor performance.
Download or read book Fabrication and Welding Engineering written by Roger Timings and published by Routledge. This book was released on 2008 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers basic sheet-metal fabrication and welding engineering principles and applications. This title includes chapters on non-technical but essential subjects such as health and safety, personal development and communication of technical information. It contains illustrations that demonstrate the practical application of the procedures described.
Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
