Download or read book Effects of Adding Horizontal Wells on Productivity of the Vertical Wells written by Mykhaylo Vasylyev and published by . This book was released on 2013 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The developed reservoir is in the primary stage of production. This study is being conducted through designing data and using CMG simulator applications to project and analyze the productivity data involved in the development of horizontal well.

Download or read book Well Productivity Handbook written by Boyun Guo and published by Elsevier. This book was released on 2014-02-25 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: With rapid changes in field development methods being created over the past few decades, there is a growing need for more information regarding energizing well production. Written by the world's most respected petroleum engineering authors, Well Productivity Handbook provides knowledge for modeling oil and gas wells with simple and complex trajectories. Covering critical topics, such as petroleum fluid properties, reservoir deliverability, wellbore flow performance and productivity of intelligent well systems, this handbook explains real-world applications illustrated with example problems.

Download or read book End Effects on Productivity Index of Horizontal Wells written by Obaid Khalaf Al-Harthy and published by . This book was released on 1994 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Underbalanced Drilling Limits and Extremes written by Bill Rehm and published by Elsevier. This book was released on 2013-11-25 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology

Download or read book Productivity and Injectivity of Horizontal Wells written by and published by . This book was released on 1999 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Fractured Reservoir Engineering written by T.D. van Golf-Racht and published by Elsevier. This book was released on 1982-04-01 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the modem language of reservoir engineering by reservoir description is understood the totality of basic local information concerning the reservoir rock and fluids which by various procedures are extrapolated over the entire reservoir. Fracture detection, evaluation and processing is another essential step in the process of fractured reservoir description. In chapter 2, all parameters related to fracture density and fracture intensity, together with various procedures of data processing are discussed in detail. After a number of field examples, developed in Chap. 3, the main objective remains the quantitative evaluation of physical properties. This is done in Chap. 4, where the evaluation of fractures porosity and permeability, their correlation and the equivalent ideal geometrical models versus those parameters are discussed in great detail. Special rock properties such as capillary pressure and relative permeability are reexamined in the light of a double-porosity reservoir rock. In order to complete the results obtained by direct measurements on rock samples, Chap. 5 examines fracturing through indirect measurements from various logging results. The entire material contained in these five chapters defines the basic physical parameters and indicates procedures for their evaluation which may be used further in the description of fractured reservoirs.

Download or read book Productivity in Natural Resource Industries written by R. David Simpson and published by Routledge. This book was released on 2014-04-04 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several senior natural resource analysts study the role played by innovation, particularly technological innovation, in the pursuit of heightened productivity. Increasing the output of a given input improves a firm‘s bottom line, makes it more competitive internationally, and reduces the potential for resource depletion and shortages. Thus, high productivity is a necessary ingredient of economic prosperity. This book illustrates the importance of technological innovation in achieving an acceptable level of output and efficiency. In this important new offering, a team of resource scholars describes and chronicles the development of recent innovations in selected natural resource industries. The authors also reveal the causes, sources, and net effect of such innovation on productivity. In all of these sectors productivity has increased considerably since the early 1980s, although the level of improvement varies across industries. To what degree did technological innovation contribute to that increase? Individual detailed case studies detail important innovations in America‘s coal, petroleum, copper, and forest industries. The primary focus is on extraction and production technologies, although the existence and importance of innovation in other areas such as management technique also enter the picture. For example, the combination of new technology with restructuring seems to have breathed new life into a floundering U.S. copper industry. The authors describe the origin and diffusion of important innovation, and the concluding chapter quantifies the net effect of such innovation on productivity.

Download or read book Productivity and Injectivity of Horizontal Wells Quarterly Technical Progress Report October 1 1995 December 31 1995 written by and published by . This book was released on 1996 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the length of a horizontal well is increased, its contact with the reservoir increases. But at the same time, the resistance to the flow in the well also increases which has a direct negative effect on the productivity of the well. The overall performance of horizontal wells depends on the balance of these two opposing factors. No reliable tools are currently available that account for both these factors in the evaluation of horizontal well performance. An analytical well-model is developed which can quantify the effects of pressure loss in the well on the overall well performance. A sensitivity study is conducted on the effect of various reservoir, fluid and well parameters on well performance.

Download or read book Impact of Perforated Completions on Inflow Profiles and Productivity of Horizontal Wells written by Said Soufi and published by . This book was released on 2001 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Productivity and Injectivity of Horizontal Wells Quarterly Report July 1 September 30 1996 written by and published by . This book was released on 1996 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This quarterly report reports on the efforts on Task 2, effects of reservoir heterogeneities on performance prediction of horizontal wells. Performance prediction of horizontal and non-conventional wells based on both analytical and numerical tools rarely match actual performance. Even a history matched case with sufficient production data fails to give reliable predictions for long times. In this study the authors explore reasons for the inability of predictive tools to make accurate predictions. They consider a case where a vertical well has been drilled and cored. Then, they generate twenty consistent geostatistical descriptions of permeability and porosity that are all constrained to hard data obtained from the vertical well. Simulations with these realizations show large differences in production rate, WOR and GOR predictions as a result of variations in reservoir properties. It is also shown that the effect of well index (WI) on simulation results is large. Furthermore, for the example considered, analytical models for critical rate and productivity calculations were found to have limited practical use.

Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.

Download or read book Petroleum Production Systems written by Michael J. Economides and published by Pearson Education. This book was released on 2013 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by four leading experts, this edition thoroughly introduces today's modern principles of petroleum production systems development and operation, considering the combined behaviour of reservoirs, surface equipment, pipeline systems, and storage facilities. The authors address key issues including artificial lift, well diagnosis, matrix stimulation, hydraulic fracturing and sand control. They show how to optimise systems for diverse production schedules using queuing theory, as well as linear and dynamic programming. Throughout, they provide both best practices and rationales, fully illuminating the exploitation of unconventional oil and gas reservoirs. Updates include: Extensive new coverage of hydraulic fracturing, including high permeability fracturing New sand and water management techniques * An all-new chapter on Production Analysis New coverage of digital reservoirs and self-learning techniques New skin correlations and HW flow techniques

Download or read book Applied Petroleum Geomechanics written by Test Test and published by Gulf Professional Publishing. This book was released on 2019-06-15 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Petroleum Geomechanics provides a bridge between theory and practice as a daily use reference that contains direct industry applications. Going beyond the basic fundamentals of rock properties, this guide covers critical field and lab tests, along with interpretations from actual drilling operations and worldwide case studies, including abnormal formation pressures from many major petroleum basins. Rounding out with borehole stability solutions and the geomechanics surrounding hydraulic fracturing and unconventional reservoirs, this comprehensive resource gives petroleum engineers a much-needed guide on how to tackle today's advanced oil and gas operations. - Presents methods in formation evaluation and the most recent advancements in the area, including tools, techniques and success stories - Bridges the gap between theory of rock mechanics and practical oil and gas applications - Helps readers understand pore pressure calculations and predictions that are critical to shale and hydraulic activity

Download or read book Hydraulic Fracturing Impacts and Technologies written by Venki Uddameri and published by CRC Press. This book was released on 2015-06-22 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing Impacts and Technologies: A Multidisciplinary Perspective serves as an introduction to hydraulic fracturing and provides balanced coverage of its benefits and potential negative effects. Presenting a holistic assessment of hydraulic fracturing and its environmental impacts, this book chronicles the history and development of un

Download or read book Productivity and Injectivity of Horizontal Wells written by and published by . This book was released on 1993 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour

Download or read book Abrasive Water Jet Perforation and Multi Stage Fracturing written by Zhongwei Huang and published by Gulf Professional Publishing. This book was released on 2017-10-19 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abrasive Water Jet Perforation and Multi-Stage Fracturing gives petroleum engineers, well completion managers and fracturing specialists a critical guide to understanding all the details of the technology including materials, tools, design methods and field applications. The exploitation and development of unconventional oil and gas resources has continued to gain importance, and multi-stage fracturing with abrasive water jets has emerged as one of the top three principal methods to recover unconventional oil and gas, yet there is no one collective reference to explain the fundamentals, operations and influence this method can deliver. The book introduces current challenges and gives solutions for the problems encountered. Packed with references and real-world examples, the book equips engineers and specialists with a necessary reservoir stimulation tool to better understand today's fracturing technology. - Provides understanding of the fundamentals, design and application of water jet perforation - Examines the pressure boosting assembly in all phases including initiation, hydraulic isolation and production stage - Evaluates production analysis, pump pressure predictions and the latest design software - Introduces current challenges and gives solutions for the problems encountered