Download or read book Analysis and Fate of Polymers in Wastewater Treatment written by Steven K. Dentel and published by . This book was released on 2000 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coagulation and Flocculation in Water and Wastewater Treatment written by John Bratby and published by IWA Publishing. This book was released on 2006-10-15 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coagulation and Flocculation in Water and Wastewater Treatment provides a comprehensive account of coagulation and flocculation techniques and technologies in a single volume covering theoretical principles to practical applications. Thoroughly revised and updated since the 1st Edition it has been progressively modified and increased in scope to cater for the requirements of practitioners involved with water and wastewater treatment. A thorough gamut of treatment scenarios is attempted, including turbidity, color and organics removal, including the technical aspects of enhanced coagulation. The effects of temperature and ionic content are described as well as the removal of specific substances such as arsenic and phosphorus. Chemical phosphorus removal is dealt with in detail, Rapid mixing for efficient coagulant utilization, and flocculation are dealt with in specific chapters. Water treatment plant waste sludge disposal is dealt with in considerable detail, in an Appendix devoted to this subject. Invaluble for water scientists, engineers and students of this field, Coagulation and Flocculation in Water and Wastewater Treatment is a convenient reference handbook in the form of numerous examples and appended information.
Download or read book Physico Chemical Wastewater Treatment and Resource Recovery written by Robina Farooq and published by BoD – Books on Demand. This book was released on 2017-05-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book on Physico-Chemical Treatment of Wastewater and Resource Recovery provides an efficient and low-cost solution for remediation of wastewater. This book focuses on physico-chemical treatment via advanced oxidation process, adsorption, its management and recovery of valuable chemicals. It discusses treatment and recovery process for the range of pollutants including BTX, PCB, PCDDs, proteins, phenols, antibiotics, complex organic compounds and metals. The occurrence of persistent pollutants poses deleterious effects on human and environmental health. Simple solutions for recovery of valuable chemicals and water during physico-chemical treatment of wastewater are discussed extensively. This book provides necessary knowledge and experimental studies on emerging physico-chemical processes for reducing water pollution and resource recovery.
Download or read book Fate Transport and Interactions of Metals written by and published by . This book was released on 1995 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flocs in Water Treatment written by David H. Bache and published by IWA Publishing. This book was released on 2007-11-08 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flocs in Water Treatment is the first of its kind - serving as a valuable aide-mémoire for scientists, process engineers and other professionals engaged in water treatment. The framework described in Flocs in Water Treatment can also be applied to aggregated solids found both in the natural environment, and within a broad range of industries. Flocs (aggregated solid matter) resulting from the combined influence of coagulation and flocculation play a vital role in solid-liquid separation processes. The design and operation of water treatment plants demands a proper understanding of the ways in which flocs affect treatment systems and how their properties can be manipulated to increase treatment efficiency. Flocs in Water Treatment provides a comprehensive account of the ways in which flocs are formed, their characterization, and how they behave in practice. Flocs are complex entities, whose properties defy easy description and measurement. In spite of this, the authors provide a clear and discerning account of the current state of knowledge; this is rooted in science and draws on many disciplines. Based on their experiences in research and the workings of full scale treatment plants, the authors offer candid advice on tasks such as the measurement of floc properties and guidance on problems involving the use of chemicals for controlling floc properties within treatment systems.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2000 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Manual written by and published by . This book was released on 1987 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1999 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phosphorus Polluter and Resource of the Future written by Christian Schaum and published by IWA Publishing. This book was released on 2018-03-15 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book provides an up-to-date and international approach that addresses the Motivations, Technologies and Assessment of the Elimination and Recovery of Phosphorus from Wastewater. This book is part of the Integrated Environmental Technology Series.
Download or read book Sludge Reduction Technologies in Wastewater Treatment Plants written by Paola Foladori and published by IWA Publishing. This book was released on 2010-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Reduction Technologies in Wastewater Treatment Plants is a review of the sludge reduction techniques integrated in wastewater treatment plants with detailed chapters on the most promising and most widespread techniques. The aim of the book is to update the international community on the current status of knowledge and techniques in the field of sludge reduction. It will provide a comprehensive understanding of the following issues in sludge reduction: principles of sludge reduction techniques; process configurations; potential performance; advantages and drawbacks; economics and energy consumption. This book will be essential reading for managers and technical staff of wastewater treatment plants as well as graduate students and post-graduate specialists.
Download or read book Biofuels from Algae written by Kuan-Yeow Show and published by Elsevier Inc. Chapters. This book was released on 2013-08-08 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive effort is being made globally to develop various biofuels as an inexhaustible and renewable energy source. Biofuels are viewed as promising alternatives to conventional fossil fuels because they have the potential to eliminate major environmental problems such as global warming and climate change created by fossil fuels. Among the still-developing biofuel technologies, biodiesel production from algae offers a good prospect for large-scale practical use, considering the fact that algae are capable of producing much more yield than other biofuels such as corn and soybean crops. Although research on algae-based biofuel is still in its developing stage, extensive work on laboratory- and pilot-scale algae-harvesting systems with promising prospects has been reported. This chapter presents a discussion of the literature review of recent advances in algal biomass harvesting. The chapter focuses on stability and separability of algae and algae-harvesting methods. Challenges and prospects of algae harvesting are also outlined. The review aims to provide useful information for future development of efficient and commercially viable algal biodiesel production.
Download or read book Physicochemical Treatment Processes written by Lawrence K. Wang and published by Springer Science & Business Media. This book was released on 2005-03-11 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the emergence of a growing desire worldwide to take positive actions to restore and protect the environment from the degrading effects of all forms of pollution: air, noise, solid waste, and water. Because pollution is a direct or indirect consequence of waste, the seemingly idealistic demand for “zero discharge” can be construed as an unrealistic demand for zero waste. However, as long as waste exists, we can only attempt to abate the subsequent pollution by converting it to a less noxious form. Three major questions usually arise when a particular type of pollution has been identified: (1) How serious is the pollution? (2) Is the technology to abate it available? and (3) Do the costs of abatement justify the degree of abatement achieved? The principal intention of the Handbook of Environmental Engineering series is to help readers formulate answers to the last two questions. The traditional approach of applying tried-and-true solutions to specific pollution pr- lems has been a major contributing factor to the success of environmental engineering, and has accounted in large measure for the establishment of a “methodology of pollution c- trol. ” However, realization of the ever-increasing complexity and interrelated nature of current environmental problems makes it imperative that intelligent planning of pollution abatement systems be undertaken.
Download or read book Biosynthetic Polymers for Medical Applications written by Laura Poole-Warren and published by Elsevier. This book was released on 2015-11-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosynthetic Polymers for Medical Applications provides the latest information on biopolymers, the polymers that have been produced from living organisms and are biodegradable in nature. These advanced materials are becoming increasingly important for medical applications due to their favorable properties, such as degradability and biocompatibility. This important book provides readers with a thorough review of the fundamentals of biosynthetic polymers and their applications. Part One covers the fundamentals of biosynthetic polymers for medical applications, while Part Two explores biosynthetic polymer coatings and surface modification. Subsequent sections discuss biosynthetic polymers for tissue engineering applications and how to conduct polymers for medical applications. - Comprehensively covers all major medical applications of biosynthetic polymers - Provides an overview of non-degradable and biodegradable biosynthetic polymers and their medical uses - Presents a specific focus on coatings and surface modifications, biosynthetic hydrogels, particulate systems for gene and drug delivery, and conjugated conducting polymers
Download or read book Coagulation and Flocculation written by Bohuslav Dobias and published by CRC Press. This book was released on 2005-03-30 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1993, Coagulation and Flocculation is a practical reference for the researchers in the field of the stabilization and destabilization of fine solid dispersions. By omitting chapters that remained unchanged from the first edition, the editors of this second edition completely update, rewrite, and expand upon all chapters to reflec
Download or read book Chitosan written by Shakeel Ahmed and published by John Wiley & Sons. This book was released on 2017-08-04 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique book presenting the latest advancements and applications of chitosan-based hydrogels and composite materials in biotechnology, environmental studies, food, medicine, water treatments, drug delivery. This book delves deeply in to the preparation, characterization and multiple applications of chitin and chitosan. The 17 chapters written by leading experts is an excellent reference source and state-of-the-art review for researchers and scientists using chitosan or biopolymers in their respective areas. This book is divided into following sections: Production and derivatives of chitosan Chitosan in the textile and food industries Chitosan in biomedical applications Chitosan in agriculture and water treatment The book is practical and readers will be able to see descriptions of chitosan production methods as well as techniques that can be used to estimate and modify their physical and chemical properties. It provides a full description not only of the traditional and recent developments in the applications of chitosan in the fields of biotechnology, environmental studies, food, medicine, water treatments, drug delivery, but it includes all of the therapeutic usages as well.
Download or read book Physical and Chemical Separation in Water and Wastewater Treatment written by Norihito Tambo and published by IWA Publishing. This book was released on 2020-11-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based upon half a century of research by the authors, Physical and Chemical Separation in Water and Wastewater Treatment addresses the whole water cycle spectrum, from global hydrological cycle, urban-regional metabolic cycle to individual living and production cycle, with respect to quality control technology based on fundamental science and theories. For every treatment process, basic scientific and environmental physical and chemical natures are explained with respect to those of water and its impurities. Health danger and risks for human beings are also covered. The authors define water qualities on a “Water Quality Matrix” composed of 35 elements. The vertical axis (row), has individual 7digit impurity size from 10-10m (water molecule 3?) to 10-3m (0.1mm sand grains) and in the horizontal axis(column) there are 5 categories of surrogate chemical and biochemical quality indices. The same 35 element matrix is used to correspond with several typical water quality treatments, unit-operation/unit-process, with a suitable characteristic grouping of the elements. The authors then present “the Water Quality Conversion Matrix” or “Water Quality Treatment Matrix”. With respect to typical treatment processes, the basic concept and scientific background are explained and the background of the technologies is clarified. Mechanisms of the process are explained and a kinetic process is formulated. The kinetics are experimentally verified quantitatively with important equilibrium and rate constants. Based on the authors’ research, various new treatment technologies are proposed with high efficiency, high capacity and less energy, and with steady operation ability. This comprehensive reference book is intended for undergraduate and graduate students, and also serves as a guide book for practical engineers and industry and university researchers.
Download or read book Innovative Wastewater Treatment Resource Recovery Technologies Impacts on Energy Economy and Environment written by Juan M. Lema and published by IWA Publishing. This book was released on 2017-06-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.
