Download or read book Effects and Control of Contamination From a Scaled MOL Translational Thruster in a Longitudinal Orientation written by and published by . This book was released on 1969 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: A test was conducted to determine the effects and control of contamination produced by a 1-lb scaled Manned Orbital Laboratory thruster. The test required firing the 1-lb translational thruster for 205 sec continuously and pulsing in its longitudinal position and determining the effects of contaminates from the thruster impinging on optical and thermal control surface test specimens located on a flat plate exposed to the thruster exhaust plume. The contamination ejected from the thruster in steady-state operation was much less than that of pulse-mode operation. Fences were used on the test plate to shield specimens from the thruster exhaust plume. In situ reflectance, emittance, and transmittance measurements were made on the optical and thermal control surface test specimens surfaces under vacuum conditions and at atmospheric pressure. Pretest and posttest laboratory measurements were made at atmospheric conditions. Contamination deposited on the plate was focused along and near the axis of the thruster. Contamination was ejected from the thruster at the startup of the engine in the steady-state operation. A 1.5-in. - high by 24-in. -long fence shielded specimens on the panel satisfactorily as opposed to a 0.75-in. -high fence. The in situ reflectance and transmittance measurements on the specimens at the simulated altitude were more realistic of the contamination encountered by the specimens from the thruster exhaust than the atmospherical posttest laboratory measurements.

Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.

Download or read book Liquid Rocket Valve Components written by H. J. Ellis and published by . This book was released on 1973 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Columbia Crew Survival Investigation Report written by Nasa and published by PDQ Press. This book was released on 2009 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA commissioned the Columbia Accident Investigation Board (CAIB) to conduct a thorough review of both the technical and the organizational causes of the loss of the Space Shuttle Columbia and her crew on February 1, 2003. The accident investigation that followed determined that a large piece of insulating foam from Columbia's external tank (ET) had come off during ascent and struck the leading edge of the left wing, causing critical damage. The damage was undetected during the mission. The Columbia accident was not survivable. After the Columbia Accident Investigation Board (CAIB) investigation regarding the cause of the accident was completed, further consideration produced the question of whether there were lessons to be learned about how to improve crew survival in the future. This investigation was performed with the belief that a comprehensive, respectful investigation could provide knowledge that can protect future crews in the worldwide community of human space flight. Additionally, in the course of the investigation, several areas of research were identified that could improve our understanding of both nominal space flight and future spacecraft accidents. This report is the first comprehensive, publicly available accident investigation report addressing crew survival for a human spacecraft mishap, and it provides key information for future crew survival investigations. The results of this investigation are intended to add meaning to the sacrifice of the crew's lives by making space flight safer for all future generations.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1972 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Molecular Gas Dynamics written by G. A. Bird and published by Oxford University Press, USA. This book was released on 1976 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.

Download or read book On the Shoulders of Titans written by Barton C. Hacker and published by Createspace Independent Pub. This book was released on 2013-10-25 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed, yet highly readable book, On the Shoulders of Titans should be the starting point for all who are interested in the basic history of the Gemini Program. NASA's second human spaceflight program, Gemini laid the groundwork for the more ambitious Apollo program which put astronauts on the Moon.

Download or read book ACS Without an Attitude written by Harold L. Hallock and published by Springer. This book was released on 2017-05-03 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book de-emphasizes the formal mathematical description of spacecraft on-board attitude and orbit applications in favor of a more qualitative, concept-oriented presentation of these topics. The information presented in this book was originally given as a set of lectures in 1999 and 2000 instigated by a NASA Flight Software Branch Chief at Goddard Space Flight Center. The Branch Chief later suggested this book. It provides an approachable insight into the area and is not intended as an essential reference work. ACS Without an Attitude is intended for programmers and testers new to the field who are seeking a commonsense understanding of the subject matter they are coding and testing in the hope that they will reduce their risk of introducing or missing the key software bug that causes an abrupt termination in their spacecraft’s mission. In addition, the book will provide managers and others working with spacecraft with a basic understanding of this subject.

Download or read book Protection of Materials and Structures from Space Environment written by J. Kleiman and published by Springer Science & Business Media. This book was released on 2006-03-09 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents the proceedings of ICPMSE-6, the sixth international conference on Protection of Materials and Structures from Space Environment, held in Toronto May 1-3, 2002. The ICPMSE series of meetings became an important part of the LEO space community since it was started in 1991. Since then, the meeting has grown steadily, attracting a large number of engineers, researchers, managers, and scientists from industrial companies, scientific institutions and government agencies in Canada, U. S. A. , Asia, and Europe, thus becoming a true international event. This year’s meeting is gaining even stronger importance with the resumption of the ISS and other space projects in LEO, GEO and Deep Space. To reflect on these activities, the topics in the program have been extended to include protection of materials in GEO and Deep Space. The combination of a broad selection of technical and scientific topics addressed by internationally known speakers with the charm of Toronto and the hospitality of the organizers brings participants back year after year. The conference was hosted and organized by Integrity Testing Laboratory Inc. (ITL), and held at the University of Toronto’s Institute for Aerospace Studies (UTIAS). The meeting was sponsored by the Materials and Manufacturing Ontario (MMO) and the CRESTech, two Ontario Centres of Excellence; Air Force Office of Scientific Research (AFOSR/NL); MD Robotics; EMS Technologies; The Integrity Testing Laboratory (ITL); and the UTIAS.

Download or read book Deep Space Propulsion written by K. F. Long and published by Springer Science & Business Media. This book was released on 2011-11-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology of the next few decades could possibly allow us to explore with robotic probes the closest stars outside our Solar System, and maybe even observe some of the recently discovered planets circling these stars. This book looks at the reasons for exploring our stellar neighbors and at the technologies we are developing to build space probes that can traverse the enormous distances between the stars. In order to reach the nearest stars, we must first develop a propulsion technology that would take our robotic probes there in a reasonable time. Such propulsion technology has radically different requirements from conventional chemical rockets, because of the enormous distances that must be crossed. Surprisingly, many propulsion schemes for interstellar travel have been suggested and await only practical engineering solutions and the political will to make them a reality. This is a result of the tremendous advances in astrophysics that have been made in recent decades and the perseverance and imagination of tenacious theoretical physicists. This book explores these different propulsion schemes – all based on current physics – and the challenges they present to physicists, engineers, and space exploration entrepreneurs. This book will be helpful to anyone who really wants to understand the principles behind and likely future course of interstellar travel and who wants to recognizes the distinctions between pure fantasy (such as Star Trek’s ‘warp drive’) and methods that are grounded in real physics and offer practical technological solutions for exploring the stars in the decades to come.

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Ground and Flight Evaluation of a Small Scale Inflatable Winged Aircraft written by and published by . This book was released on 2002 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: A small-scale, instrumented research aircraft was flown to investigate the flight characteristics of inflatable wings. Ground tests measured the static structural characteristics of the wing at different inflation pressures, and these results compared favorably with analytical predictions. A research-quality instrumentation system was assembled, largely from commercial off-the-shelf components, and installed in the aircraft. Initial flight operations were conducted with a conventional rigid wing having the same dimensions as the inflatable wing. Subsequent flights were conducted with the inflatable wing. Research maneuvers were executed to identify the trim, aerodynamic performance, and longitudinal stability and control characteristics of the vehicle in its different wing configurations. For the angle-of-attack range spanned in this flight program.

Download or read book Energiya Buran written by Bart Hendrickx and published by Springer Science & Business Media. This book was released on 2007-12-05 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This absorbing book describes the long development of the Soviet space shuttle system, its infrastructure and the space agency’s plans to follow up the first historic unmanned mission. The book includes comparisons with the American shuttle system and offers accounts of the Soviet test pilots chosen for training to fly the system, and the operational, political and engineering problems that finally sealed the fate of Buran and ultimately of NASA’s Shuttle fleet.

Download or read book Marine Wastewater Outfalls and Treatment Systems written by Philip J. W. Roberts and published by IWA Publishing. This book was released on 2010-09-19 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater disposal by marine outfalls is proven and effective and is a reliable and cost effective solution with minimal environmental impacts. The design and siting of submarine outfalls is a complex task that relies on many disciplines including oceanography, civil and environmental engineering, marine biology, construction, economics, and public relations. Marine Wastewater Outfalls and Treatment Systems brings these disciplines together and outlines all tasks involved in the planning and design of a wastewater system involving a marine outfall. This book concerns the design of marine wastewater disposal systems: that is an ocean outfall plus treatment plant. All aspects of outfall design and planning are covered, including water quality design criteria, mathematical modelling of water quality and dilution, gathering required oceanographic data, appropriate wastewater treatment for marine discharges, construction materials for marine pipelines, forces on pipelines and outfall design, outfall hydraulics, outfall construction, tunnelled outfalls, operation and maintenance, monitoring, case studies are discussed and methods for gaining public acceptance for the project are presented. Finally, costs for many outfalls around the world are summarized and methods for estimating costs are given. This is the first book to consider all aspects of marine outfall planning and construction. The authors are all extensively involved with outfall schemes and aware of recent developments. The science and technology of all aspects of outfall discharges into coastal waters and estuaries of treated municipal or industrial wastewater has advanced considerably over the past few years. Marine Wastewater Outfalls and Treatment Systems provides an up to date and comprehensive summary of this rapidly developing area.

Download or read book Aeroacoustic Measurements written by Thomas J. Mueller and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes recent developments in aeroacoustic measurements in wind tunnels and the interpretation of the resulting data. The reader will find the latest measurement techniques described along with examples of the results.

Download or read book Large Space Structures Systems in the Space Station Era written by and published by . This book was released on 1991 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Future Spacecraft Propulsion Systems written by Paul A. Czysz and published by Springer Science & Business Media. This book was released on 2006-09-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understandable perspective on the types of space propulsion systems necessary to enable low-cost space flights to Earth orbit and to the Moon and the future developments necessary for exploration of the solar system and beyond to the stars.