Download or read book Performance of Epoxy coated Reinforcing Steel in Highway Bridges written by Kenneth C. Clear and published by Transportation Research Board. This book was released on 1995 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Galvanized Steel Reinforcement in Concrete written by Stephen Yeomans and published by Elsevier. This book was released on 2004-11-26 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete is one of the most widely used modern materials of construction. It is comparatively cheap, readily available, and suitable for a variety of building and construction applications. Galvanized Steel Reinforcement in Concrete provides a detailed resource covering all aspects of this important material. Both servicability and durability aspects are well covered, with all the information needed maximise the life of buildings constructed from it. Containing an up-to-date and comprehensive collection of technical information and data from world renound authors, it will be a valuable source of reference for academics, researchers, students and professionals alike. - Provides information vital to prolong the life of buildings constructed from this versatile material - Brings together a disparate body of knowledge from many parts of the world into a concise and authoritative text - Containing an up-to-date and comprehensive collection of technical information
Download or read book Effectiveness of Epoxy coated Reinforcing Steel Interim Report written by and published by . This book was released on 1992 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary function of an epoxy coating is to act as a barrier to prevent corrosion-causing chloride ions and oxygen from reaching steel surfaces. For more than a decade, epoxy-coated reinforcing steel has generally been effective in reducing or preventing chloride-induced corrosion in bridges and other concrete structures. Recently, however, instances of corrosion problems or premature failures in Florida, Oregon and New York have focussed attention on the product and its quality. This report was initiated as a result of the questions raised by these failures. In the first section of the report, a state of the art review of epoxy-coated reinforced steel is presented. It details the research performed on epoxy coating, and the results of this research both in the lab and in the field. As well, the authors highlight several areas to be considered for future investigation. The second section examines the fundamentals of epoxy, and the coating process. It provides an overview of the theory, technology, testing and practice as these presently exist for fusion bonded epoxy coatings on steels. The significance of the tests available for use on epoxy-coated rebars and epoxy-coated pipe is described. The report contains numerous figures.
Download or read book Corrosion of Steel in Concrete Structures written by Amir Poursaee and published by Woodhead Publishing. This book was released on 2023-02-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. - Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete - Introduces the latest measuring methods, data collection, and advanced modeling techniques - Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices
Download or read book Nonmetallic Coatings for Concrete Reinforcing Bars written by James R. Clifton and published by . This book was released on 1975 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Protection of Reinforcing Steels written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2009-01-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has long been recognised that corrosion of steel is extremely costly and affects many industry sectors, including concrete construction. The cost of corrosion of steel reinforcement within concrete is estimated at many billions of dollars worldwide. The corrosion of steel reinforcement represents a deterioration of the steel which in turn detrimentally affects its performance and therefore that of the concrete element within which it has been cast. A great amount of work has been undertaken over the years concerning the prevention of corrosion of steel, including the application of coatings, which has included the study of the process of corrosion itself, the properties of reinforcing steels and their resistance to corrosion as well as the design of structures and the construction process. The objective of fib Bulletin 49 is to provide readers with an appreciation of the principles of corrosion of reinforcing steel embedded in concrete and to describe the behaviour of particular steels and their coatings as used to combat the effects of such corrosion. These include galvanised reinforcement, epoxy coated reinforcement, and stainless reinforcing steel. It also provides information on the relative costs of the materials and products which it covers. It does not deal with structure design or the process of construction or with the post-construction phase of structure management including repair. It is hoped that it will nevertheless increase the understanding of readers in the process of corrosion of reinforcing steels and the ability of key materials and processes to reduce its harmful effects.
Download or read book Effectiveness of Epoxy Coated Reinforced Steel written by Kenneth C. Clear and published by . This book was released on 1992-11-01 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary function of an eposy-coating is to act as a barrier to prevent corrosion-causing chloride ions and oxygen from reaching steel surfaces. For more than a decade, epoxy-coated reinforcing steel has generally been effective in reducing or preventing chloride-induced corrosion in bridges and other concrete structures. Recently, however, instances of corrosion problems or premature failures in Florida, Oregon and New York have focussed attention on the product and its quality. This report was initiated as a result of the questions raised by these failures.
Download or read book Eco efficient Repair and Rehabilitation of Concrete Infrastructures written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2024-03-13 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Repair and Rehabilitation of Concrete Infrastructures, Second Edition provides an updated state-of-the-art review on the latest advances in this important research field. The first section is brought fully up-to-date and focuses on deterioration assessment methods. Section two contains brand new chapters on innovative concrete repair and rehabilitation materials including: fly ash-based alkali-activated repair materials for concrete exposed to aggressive environments; repairing concrete structures with alkali-activated metakaolin mortars; concrete with micro encapsulated self-healing materials; concrete repaired with bacteria; concrete structures repaired with engineered cementitious composites; concrete repaired by electrodeposition; the assessment of concrete after repair operations and durability of concrete repair. The final section has also been amended to include six new chapters on design, Life-cycle cost analysis and life-cycle assessment. These chapters include maintenance strategies for concrete structures; a comparison of different repair methods; life cycle assessment of the effects of climate change on bridge deterioration; life-cycle-cost benefits of cathodic protection of concrete structures; life-cycle cost analyses for concrete bridges exposed to chlorides and life-cycle analysis of repair of concrete pavements. The book will be an essential reference resource for materials scientists, civil and structural engineers, architects, structural designers and contractors working in the construction industry. - Presents the latest research findings on eco-efficient repair and rehabilitation of concrete infrastructures - Provides comprehensive coverage from damage detection and assessment, to repair strategies, and structural health monitoring - Diverse author base offering insights on construction practice and employed technologies worldwide - Includes a section on innovative repair and rehabilitation materials, as well as case studies on life cycle cost analysis and LCA
Download or read book Coating Protection for Reinforcement written by C. Andrade and published by Thomas Telford. This book was released on 1995 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides a technical survey of the most common coating protection systems for steel reinforcement, the use of which is rapidly increasing at present. The text also evaluates the practical effect of the systems and is the result of a research project conducted by a CEB task group which was specifically assembled to address the need for more information in this subject area.
Download or read book High performance concrete pavements written by and published by . This book was released on 2002 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion of Steel in Concrete written by Luca Bertolini and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel-reinforced concrete is used ubiquitously as a building material due to its unique combination of the high compressive strength of concrete and the high tensile strength of steel. Therefore, reinforced concrete is an ideal composite material that is used for a wide range of applications in structural engineering such as buildings, bridges, tunnels, harbor quays, foundations, tanks and pipes. To ensure durability of these structures, however, measures must be taken to prevent, diagnose and, if necessary, repair damage to the material especially due to corrosion of the steel reinforcement. The book examines the different aspects of corrosion of steel in concrete, starting from basic and essential mechanisms of the phenomenon, moving up to practical consequences for designers, contractors and owners both for new and existing reinforced and prestressed concrete structures. It covers general aspects of corrosion and protection of reinforcement, forms of attack in the presence of carbonation and chlorides, problems of hydrogen embrittlement as well as techniques of diagnosis, monitoring and repair. This second edition updates the contents with recent findings on the different topics considered and bibliographic references, with particular attention to recent European standards. This book is a self-contained treatment for civil and construction engineers, material scientists, advanced students and architects concerned with the design and maintenance of reinforced concrete structures. Readers will benefit from the knowledge, tools, and methods needed to understand corrosion in reinforced concrete and how to prevent it or keep it within acceptable limits.
Download or read book Plastics Technology Handbook written by Manas Chanda and published by CRC Press. This book was released on 2017-11-07 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated throughout to reflect advances over the last decade, the Fifth Edition continues the handbook’s tradition of authoritative coverage of fundamentals, production methods, properties, and applications of plastics and polymer-based materials. It covers tooling for plastics fabrication processes, thermoplastics, thermosetting plastics, foamed plastics, reinforced plastics, plastisols, and new developments in mold design. It also discusses rubber compounding and processing technologies. More recent developments in polymer fabrication and processing, including electrospinning, electrografted coating, polymer-metal hybrid joining, flex printing, and rapid prototyping/ 3D printing, are also presented. The handbook highlights advanced materials including natural and synthetic gfnanosize polymers, their unusual properties, and innovative applications, as well as polymer-carbon nanocomposites, graphene-based polymer nanocomposites, smart healable polymer composites, smart polymer coatings, electroactive polymers, polymer nanomaterials, and novel nano-/microfibrillar polymer composites. It offers updates on polymer solar battery development, plastics recycling and disposal methods, new concepts of "upcycling" and single-polymer composites, renewable synthetic polymers, biodegradable plastics and composites, and toxicity of plastics. The book also provides an overview of new developments in polymer applications in various fields including packaging, building and construction, corrosion prevention and control, automotive, aerospace applications, electrical and electronic applications, agriculture and horticulture, domestic appliances and business machines, medical and biomedical applications, marine and offshore applications, and sports.
Download or read book Durability of Building Materials Components 7 vol 1 written by C Sjostrom and published by Routledge. This book was released on 2018-12-12 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2004. This volume presents the proceedings of the seventh Conference on the Durability of Building Materials and Components, held in May 1996. Emphasis is given to service life data and in-service performance, and the text reflects current research activity in these areas.
Download or read book Evaluation of Corrosion Protection Methods for Reinforced Concrete Highway Structures written by Jennifer L. Kepler and published by . This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1970s, research projects and field studies have been conducted on different methods for protecting reinforced concrete bridges from corrosion damage. The methods include alternative reinforcement and slab design, barrier methods, electrochemical methods, and corrosion inhibitors. Each method and its underlying principles are described, performance results of laboratory and/or field trials are reviewed, and systems are evaluated based on the results of the trials. Using performance results from the studies and costs obtained from transportation agencies, an economic analysis is used to estimate the cost of each system over a 75-year economic life using discount rates of 2%, 4% and 6%.
Download or read book Novel Anti Corrosion and Anti Fouling Coatings and Thin Films written by Hari Murthy and published by John Wiley & Sons. This book was released on 2024-10-01 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials and nanocomposite materials have been developed as corrosion inhibitors and are the most noble and effective alternatives to traditional organic corrosion inhibitors. Nanomaterials provide reasonably high anticorrosive activity in both aqueous and solution phases. A unified approach to this task is lacking, however, which highlights the role of all disciplines involved in the creation and use of corrosion protection coatings for metals. Fouling is the process of accumulating unwanted material that is mostly non-living and comprised of detritus and organic or inorganic compounds, or organisms, such as tiny viruses up to giant kelps. This book covers both the processes of biofouling and anti(bio)fouling, and the devices that stop the biofouling process. This book provides a missing synopsis by providing an understanding of the anticorrosive and anti-biofouling effects of nanomaterials and nanocomposites under different environments. It features an up-to-date picture of the quality and chemistry of a substrate surface, its proper preparation by conversion treatment, the function of resins and anticorrosive pigments in paints, and novel concepts for corrosion protection.
Download or read book Steel Corrosion in Concrete written by Arnon Bentur and published by CRC Press. This book was released on 1997-10-09 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poor durability of concrete is a major cause of problems in modern building and civil engineering structures in all countries: the annual cost of investigating and repairing deteriorating reinforced concrete structures runs into many millions of pounds. This book explains the fundamentals of the corrosion of steel in concrete. It is comprehensive and provides a basis for the practising engineer to design concrete structures which avoid the problem using modern concepts and specifications. A limited discussion of corrosion measurement and repairs is also provided.
Download or read book Public Roads written by and published by . This book was released on 1999 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
