Download or read book Risk Assessment and Management for Ships and Offshore Structures written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2024-04-04 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volatile, uncertain, complex, and ambiguous (VUCA) nature of environmental and operational conditions is still the major cause of marine accidents, with knock-on effects in terms of casualties, property damage, and marine pollution. Recognized as the most effective approach to navigate VUCA environments, risk-based assessment methods provide a solution to address challenges associated with health, safety, and environmental protection in extreme conditions and when accidents involving engineering structures and infrastructure occur. This book serves as a comprehensive guide to the foundational principles, current practices, and cuttingedge trends in quantitative risk assessment and management for ships and offshore structures. With six partsencompassing a total of 35 chapters, it covers risk assessment and management for offshore installations, oil and gas leaks, collisions and grounding, and fires and explosions. Tailored for ship and offshore structural engineers, naval architects, as well as mechanical and civil engineers involved in advanced safety studies, this book is an invaluable resource for both practicing engineers and researchers in this field.• Offers insights into quantitative risk assessment and asset management for ships and offshore structures inextreme conditions and in the event of accidents• Equips engineers with valuable statistical data sets and enhances data assimilation techniques for precisehazard frequency calculations• Seamlessly integrates fundamental principles with practical applications, addressing emerging challengesand leveraging the latest technological advances in the field
Download or read book Ship Shaped Offshore Installations written by Jeom Kee Paik and published by Cambridge University Press. This book was released on 2007-01-15 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship-shaped offshore units are some of the more economical systems for the development of offshore oil and gas, and are often preferred in marginal fields. These systems are especially attractive to develop oil and gas fields in deep and ultra-deep water areas and remote locations away from existing pipeline infrastructures. Recently, the ship-shaped offshore units have been applied to near shore oil and gas terminals. This 2007 text is an ideal reference on the technologies for design, building and operation of ship-shaped offshore units, within inevitable space requirements. The book includes a range of topics, from the initial contracting strategy to decommissioning and the removal of the units concerned. Coverage includes both fundamental theory and principles of the individual technologies. This book will be useful to students who will be approaching the subject for the first time as well as designers working on the engineering for ship-shaped offshore installations.
Download or read book Probability and Mechanics of Ship Collision and Grounding written by Shengming Zhang and published by Butterworth-Heinemann. This book was released on 2019-05-18 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Probability and Mechanics of Ship Collision and Grounding provides simplified analytical procedures for ship collision and grounding assessments, including probabilistic methods, an estimation of the energy released during collisions, and a prediction of the extent of damage on involved structures. An additional chapter is dedicated to current finite element analysis techniques that are used for estimating structural damage during ship collisions. The book encapsulates reliable and fast analysis methods for collision and grounding assessment, presenting tactics that have been extensively validated with experimental and numerical results. In addition, all described analysis methods include realistic calculation examples to provide confidence in their use. - Provides mathematical expressions for the determination of probability of ship grounding events, ship to ship collisions and ship collisions against fixed and floating offshore installations, i.e., offshore wind parks and bridges over navigational channels - Provides analytical solutions to calculate the energy released for crushing in ship collision scenarios and loading on ship bottoms in grounding events - Reviews damage theorems and materials modellings and presents simplified analytical methods to determine the structural damage of ship and offshore structures in ship collisions and grounding - Provides calculation examples for each analysis method
Download or read book Advanced Structural Safety Studies written by Jeom Kee Paik and published by Springer. This book was released on 2019-07-25 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes principles, industry practices and evolutionary methodologies for advanced safety studies, which are helpful in effectively managing volatile, uncertain, complex, and ambiguous (VUCA) environments within the framework of quantitative risk assessment and management and associated with the safety and resilience of structures and infrastructures with tolerance against various types of extreme conditions and accidents such as fires, explosions, collisions and grounding. It presents advanced computational models for characterizing structural actions and their effects in extreme and accidental conditions, which are highly nonlinear and non-Gaussian in association with multiple physical processes, multiple scales, and multiple criteria. Probabilistic scenario selection practices and applications are presented. Engineering practices for structural crashworthiness analysis in extreme conditions and accidents are described. Multidisciplinary approaches involving advanced computational models and large-scale physical model testing are emphasized. The book will be useful to students at a post-graduate level as well as researchers and practicing engineers.
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
Download or read book Safety and Reliability Safe Societies in a Changing World written by Stein Haugen and published by CRC Press. This book was released on 2018-06-15 with total page 3202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Safe Societies in a Changing World collects the papers presented at the 28th European Safety and Reliability Conference, ESREL 2018 in Trondheim, Norway, June 17-21, 2018. The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk management Safety and Reliability – Safe Societies in a Changing World will be invaluable to academics and professionals working in a wide range of industrial and governmental sectors: offshore oil and gas, nuclear engineering, aeronautics and aerospace, marine transport and engineering, railways, road transport, automotive engineering, civil engineering, critical infrastructures, electrical and electronic engineering, energy production and distribution, environmental engineering, information technology and telecommunications, insurance and finance, manufacturing, marine transport, mechanical engineering, security and protection, and policy making.
Download or read book MARE WINT written by Wiesław Ostachowicz and published by Springer. This book was released on 2016-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a holistic, interdisciplinary overview of offshore wind energy, and is a must-read for advanced researchers. Topics, from the design and analysis of future turbines, to the decommissioning of wind farms, are covered. The scope of the work ranges from analytical, numerical and experimental advancements in structural and fluid mechanics, to novel developments in risk, safety & reliability engineering for offshore wind.The core objective of the current work is to make offshore wind energy more competitive, by improving the reliability, and operations and maintenance (O&M) strategies of wind turbines. The research was carried out under the auspices of the EU-funded project, MARE-WINT. The project provided a unique opportunity for a group of researchers to work closely together, undergo multidisciplinary doctoral training, and conduct research in the area of offshore wind energy generation. Contributions from expert, external authors are also included, and the complete work seeks to bridge the gap between research and a rapidly-evolving industry.
Download or read book Apply Safety Risk and Reliability Analysis of Marine System written by Dr. Oladokun S. Olanrewaju and published by Xlibris Corporation. This book was released on 2013-10-17 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary time has seen alarming environmental revolt that is calls for attention and concern about the biosphere world, a condition that calls for need to use advantage of human improved knowledge and civilization in science engineering to develop proactive, efficient and predictive based system that meet reliability and sustainability requirement as well to reduce uncertainty components of system design. Proactive based philosophy under safety and environmental framework should be exercise on all level of system life cycle, including design, construction, operation and disposal. Selection of all element of the life cycle should be responsibly done and pollution impact of the system to the environment and community should be mitigated. The book present application of risk and reliability analysis to various cases of marine system and subsystem, application of risk method ranging from qualitative, quantitative to simulation and analytical approach is presented.
Download or read book Developments in the Collision and Grounding of Ships and Offshore Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2019-10-11 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the Collision and Grounding of Ships and Offshore includes the contributions to the 8th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS 2019, Lisbon, Portugal, 21-23 October 2019). The series of ICCGS-conferences started in 1996 in San Francisco, USA, and are organised every three years in Europe, Asia and the Americas. Developments in the Collision and Grounding of Ships and Offshore covers a wide range of topics, from the behavior of large passenger vessels in collision and grounding, collision and grounding in arctic conditions including accidental ice impact, stability residual strength and oil outflow of ships after collision or grounding, collision and grounding statistics and predictions and measures of the probability of incidents, risk assessment of collision and grounding, prediction and measures for reduction of collision and grounding, new designs for improvement of structural resistance to collisions, analysis of ultimate strength of ship structures (bulkheads, tank tops, shell etc.), design of buffer bows to reduce collision consequences, design of foreship structures of ferries with doors to avoid water ingress in case of a collision, development of rational rules for the structural design against collision and grounding, innovative navigation systems for safer sea transportation, the role of IMO, classification societies, and other regulatory bodies in developing safer ships, collision between ships and offshore structures, collision between ships and fixed or floating bridges and submerged tunnels, collision with quays and waterfront structures, collision and grounding experiments, properties of marine-use materials under impact loadings, residual strength of damaged ships and offshore structures, analysis of ultimate strength of ship structures, to human factors in collision and grounding accidents. Developments in the Collision and Grounding of Ships and Offshore is a valuable resource for academics, engineers and professionals involved in these areas.
Download or read book Offshore Risk Assessment written by Jan-Erik Vinnem and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Risk Assessment is the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. Risk assessment techniques have been used for some years in the offshore oil and gas industry, and their use is set to expand increasingly as the industry moves into new areas and faces new challenges in older regions. The book starts with a thorough discussion of risk analysis methodology. Subsequent chapters are devoted to analytical approaches to escalation, escape, evacuation and rescue analysis of safety and emergency systems. Separate chapters analyze the main hazards of offshore structures: Fire, explosion, collision and falling objects. Risk mitigation and control are then discussed, followed by an outline of an alternative approach to risk modelling that focuses especially on the risk of short-duration activities. Not only does the book describe the state of the art of QRA, it also identifies weaknesses and areas that need development. Readership: Besides being a comprehensive reference for academics and students of marine/offshore risk assessment and management, the book should also be owned by professionals in the industry, contractors, suppliers, consultants and regulatory authorities.
Download or read book Collision and Grounding of Ships and Offshore Structures written by Jorgen Amdahl and published by CRC Press. This book was released on 2013-05-14 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collision and Grounding of Ships and Offshore Structures contains the latest research results and innovations presented at the 6th International Conference on Collision and Grounding of Ships and Offshore Structures (Trondheim, Norway, 17-19 June 2013). The book comprises contributions made in the field of numerical and analytical analysis of
Download or read book Offshore Structures written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2019-11-06 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Structures: Design, Construction and Maintenance, Second Edition covers all types of offshore structures and platforms employed worldwide. As the ultimate reference for selecting, operating and maintaining offshore structures, this book provides a roadmap for designing structures which will stand up even in the harshest environments. Subsea pipeline design and installation is also covered in this edition, as is the selection of the proper type of offshore structure, the design procedure for the fixed offshore structure, nonlinear analysis (Push over) as a new technique to design and assess the existing structure, and more. With this book in hand, engineers will have the most up-to-date methods for performing a structural lifecycle analysis, implementing maintenance plans for topsides and jackets and using non-destructive testing. - Provides a one-stop guide to offshore structure design and analysis - Presents easy-to-understand methods for structural lifecycle analysis - Contains expert advice for designing offshore platforms for all types of environments
Download or read book Aquaculture Perspective of Multi Use Sites in the Open Ocean written by Bela H. Buck and published by Springer. This book was released on 2017-05-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license. This volume addresses the potential for combining large-scale marine aquaculture of macroalgae, molluscs, crustaceans, and finfish, with offshore structures, primarily those associated with energy production, such as wind turbines and oil-drilling platforms. The volume offers a comprehensive overview and includes chapters on policy, science, engineering, and economic aspects to make this concept a reality. The compilation of chapters authored by internationally recognized researchers across the globe addresses the theoretical and practical aspects of multi-use, and presents case studies of research, development, and demonstration-scale installations in the US and EU.
Download or read book Offshore Risk Assessment written by Jan-Erik Vinnem and published by Springer Science & Business Media. This book was released on 2007-06-02 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Risk Assessment was the first book to deal with quantified risk assessment (QRA) as applied specifically to offshore installations and operations. This book is a major revision of the first edition. It has been informed by a major R&D programme on offshore risk assessment in Norway (2002-2006). Not only does this book describe the state-of-the-art of QRA, it also identifies weaknesses and areas that need development.
Download or read book Advances in the Collision and Grounding of Ships and Offshore Structures written by Hervé Le Sourne and published by CRC Press. This book was released on 2023-09-11 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers state-of-the-art developments in the collision and grounding of ship and offshore structures. The topics covered by the contributions include: dynamics of vessels in collision and grounding; collision and grounding in Arctic conditions; collision and grounding statistics and measures of the probability of incidents; risk assessment of collision and grounding; measures for reduction of collision and grounding, machine learning methods for the evaluation of probabilistic collision and grounding risk; new designs for improvement of structural resistance to collisions; analysis of ultimate strength of damaged ship structures; design of buffer bows to reduce collision consequences; innovative navigation systems for safer sea transportation, collision between ships and offshore structures; collision between ships and fixed or floating bridges, collision and grounding experiments; properties of materials under impact loadings; residual strength of damaged ships and offshore structures; hull girder response of ships under severe dynamic loadings. The book is aimed at naval architects, marine engineers and scientists. The ICCGS conferences aim to present state-of-the-art methods for analysis and design against collision and grounding of ships, collisions between ships and icebergs, offshore structures, bridges, submerged tunnels and waterfront structures. Previous conferences were held in: San Francisco, USA in 1996; Copenhagen, Denmark in 2001; Tokyo, Japan in 2004; Hamburg, Germany in 2007; Helsinki, Finland in 2010; Trondheim, Norway in 2013; Ulsan, South Korea in 2016, and Lisbon, Portugal in 2019. The Proceedings in Marine Technology and Ocean Engineering series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) Conferences, the Marine Structures (MARSTRUCT) Conferences, the Renewable Energies Offshore (RENEW) Conferences and the Maritime Technology (MARTECH) Conferences, and the Collision and Grounding of Ships and Offshore Structures (ICCGS) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.
Download or read book Collisions written by North of England P&I Association and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed specifically for use on ships' bridges, this unique guides provides practical advice to watchkeepers on the most important 12 rules of the International Regulations for Preventing Collisions at Sea 1972 (COLREGs), together with case studies on plotting sheets.
Download or read book Marine Structural Design written by Yong Bai and published by Butterworth-Heinemann. This book was released on 2015-09-18 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine Structural Design, Second Edition, is a wide-ranging, practical guide to marine structural analysis and design, describing in detail the application of modern structural engineering principles to marine and offshore structures. Organized in five parts, the book covers basic structural design principles, strength, fatigue and fracture, and reliability and risk assessment, providing all the knowledge needed for limit-state design and re-assessment of existing structures. Updates to this edition include new chapters on structural health monitoring and risk-based decision-making, arctic marine structural development, and the addition of new LNG ship topics, including composite materials and structures, uncertainty analysis, and green ship concepts. - Provides the structural design principles, background theory, and know-how needed for marine and offshore structural design by analysis - Covers strength, fatigue and fracture, reliability, and risk assessment together in one resource, emphasizing practical considerations and applications - Updates to this edition include new chapters on structural health monitoring and risk-based decision making, and new content on arctic marine structural design