Download or read book Theory of Gas Injection Processes written by Franklin Mattes Orr (Jr.) and published by . This book was released on 2007 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Injection Methods written by Zhaomin Li and published by Gulf Professional Publishing. This book was released on 2022-09-24 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Enhanced Oil Recovery Series delivers a multivolume approach that addresses the latest research on various types of EOR. The second volume in the series, Gas Injection Methods, helps engineers focus on the latest developments in one of the fastest growing areas. Different techniques are described in addition to the latest technology such as data mining and unconventional reservoirs. Supported field case studies are included to show a bridge between research and practical application, making it useful for both academics and practicing engineers. Structured to start with an introduction on various gas types and different gas injection methods, screening criteria for choosing gas injection method, and environmental issues during gas injection methods, the editors then advance on to more complex content, guiding the engineer into newer topics involving CO2 such as injection in tight oil reservoirs, shale oil reservoirs, carbonated water, data mining, and formation damage. Supported by a full spectrum of contributors, this book gives petroleum engineers and researchers the latest research developments and field applications to drive innovation for the future. - Helps readers understand the latest research and practical applications specific to foam flooding and gas injection - Provides readers with the latest technology, including nanoparticle-stabilized foam for mobility control and carbon storage in shale oil reservoirs - Teaches users about additional methods such as data mining applications and economic and environmental considerations
Download or read book Fundamentals and Practical Aspects of Gas Injection written by Reza Azin and published by Springer Nature. This book was released on 2021-07-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different aspects of gas injection, from the classic pressure maintenance operation to enhanced oil recovery (EOR), underground gas storage (UGS), and carbon capture and storage (CCS). The authors detail the unique characteristics and specific criteria of each application, including: material balance equations phase behaviour reservoir engineering well design operating aspects surface facilities environmental issues Examples, data, and simulation codes are provided to enable the reader to gain an in-depth understanding of these applications. Fundamentals and Practical Aspects of Gas Injection will be of use to practising engineers in the fields of reservoir engineering, and enhanced oil recovery. It will also be of interest to researchers, academics, and graduate students working in the field of petroleum engineering.
Download or read book SPE Journal written by and published by . This book was released on 2004 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equations of State and PVT Analysis written by Tarek Ahmed and published by Gulf Professional Publishing. This book was released on 2016-03-02 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the properties of a reservoir's fluids and creating a successful model based on lab data and calculation are required for every reservoir engineer in oil and gas today, and with reservoirs becoming more complex, engineers and managers are back to reinforcing the fundamentals. PVT (pressure-volume-temperature) reports are one way to achieve better parameters, and Equations of State and PVT Analysis, Second Edition, helps engineers to fine tune their reservoir problem-solving skills and achieve better modeling and maximum asset development. Designed for training sessions for new and existing engineers, Equations of State and PVT Analysis, Second Edition, will prepare reservoir engineers for complex hydrocarbon and natural gas systems with more sophisticated EOS models, correlations and examples from the hottest locations around the world such as the Gulf of Mexico, North Sea and China, and Q&A at the end of each chapter. Resources are maximized with this must-have reference. - Improve with new material on practical applications, lab analysis, and real-world sampling from wells to gain better understanding of PVT properties for crude and natural gas - Sharpen your reservoir models with added content on how to tune EOS parameters accurately - Solve more unconventional problems with field examples on phase behavior characteristics of shale and heavy oil
Download or read book Efficient Simulation of Thermal Enhanced Oil Recovery Processes written by Zhouyuan Zhu and published by Stanford University. This book was released on 2011 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulating thermal processes is usually computationally expensive because of the complexity of the problem and strong nonlinearities encountered. In this work, we explore novel and efficient simulation techniques to solve thermal enhanced oil recovery problems. We focus on two major topics: the extension of streamline simulation for thermal enhanced oil recovery and the efficient simulation of chemical reaction kinetics as applied to the in-situ combustion process. For thermal streamline simulation, we first study the extension to hot water flood processes, in which we have temperature induced viscosity changes and thermal volume changes. We first compute the pressure field on an Eulerian grid. We then solve for the advective parts of the mass balance and energy equations along the individual streamlines, accounting for the compressibility effects. At the end of each global time step, we account for the nonadvective terms on the Eulerian grid along with gravity using operator splitting. We test our streamline simulator and compare the results with a commercial thermal simulator. Sensitivity studies for compressibility, gravity and thermal conduction effects are presented. We further extended our thermal streamline simulation to steam flooding. Steam flooding exhibits large volume changes and compressibility associated with the phase behavior of steam, strong gravity segregation and override, and highly coupled energy and mass transport. To overcome these challenges we implement a novel pressure update along the streamlines, a Glowinski scheme operator splitting and a preliminary streamline/finite volume hybrid approach. We tested our streamline simulator on a series of test cases. We compared our thermal streamline results with those computed by a commercial thermal simulator for both accuracy and efficiency. For the cases investigated, we are able to retain solution accuracy, while reducing computational cost and gaining connectivity information from the streamlines. These aspects are useful for reservoir engineering purposes. In traditional thermal reactive reservoir simulation, mass and energy balance equations are solved numerically on discretized reservoir grid blocks. The reaction terms are calculated through Arrhenius kinetics using cell-averaged properties, such as averaged temperature and reactant concentrations. For the in-situ combustion process, the chemical reaction front is physically very narrow, typically a few inches thick. To capture accurately this front, centimeter-sized grids are required that are orders of magnitude smaller than the affordable grid block sizes for full field reservoir models. To solve this grid size effect problem, we propose a new method based on a non-Arrhenius reaction upscaling approach. We do not resolve the combustion front on the grid, but instead use a subgrid-scale model that captures the overall effects of the combustion reactions on flow and transport, i.e. the amount of heat released, the amount of oil burned and the reaction products generated. The subgrid-scale model is calibrated using fine-scale highly accurate numerical simulation and laboratory experiments. This approach significantly improves the computational speed of in-situ combustion simulation as compared to traditional methods. We propose the detailed procedures to implement this methodology in a field-scale simulator. Test cases illustrate the solution consistency when scaling up the grid sizes in multidimensional heterogeneous problems. The methodology is also applicable to other subsurface reactive flow modeling problems with fast chemical reactions and sharp fronts. Displacement front stability is a major concern in the design of all the enhanced oil recovery processes. Historically, premature combustion front break through has been an issue for field operations of in-situ combustion. In this work, we perform detailed analysis based on both analytical methods and numerical simulation. We identify the different flow regimes and several driving fronts in a typical 1D ISC process. For the ISC process in a conventional mobile heavy oil reservoir, we identify the most critical front as the front of steam plateau driving the cold oil bank. We discuss the five main contributors for this front stability/instability: viscous force, condensation, heat conduction, coke plugging and gravity. Detailed numerical tests are performed to test and rank the relative importance of all these different effects.
Download or read book SPE Reservoir Evaluation Engineering written by and published by . This book was released on 2010 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Applied Reservoir Simulation written by John R. Fanchi and published by Elsevier. This book was released on 2005-12-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulate reservoirs effectively to extract the maximum oil, gas and profit, with this book and free simlation software on companion web site.
Download or read book Miscible Displacement written by Fred I. Stalkup and published by . This book was released on 1983 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Reservoir Formation Damage written by Faruk Civan and published by Elsevier. This book was released on 2011-08-30 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Formation Damage, Second edition is a comprehensive treatise of the theory and modeling of common formation damage problems and is an important guide for research and development, laboratory testing for diagnosis and effective treatment, and tailor-fit- design of optimal strategies for mitigation of reservoir formation damage. The new edition includes field case histories and simulated scenarios demonstrating the consequences of formation damage in petroleum reservoirsFaruk Civan, Ph.D., is an Alumni Chair Professor in the Mewbourne School of Petroleum and Geological Engineering at the University of Oklahoma in Norman. Dr. Civan has received numerous honors and awards, including five distinguished lectureship awards and the 2003 SPE Distinguished Achievement Award for Petroleum Engineering Faculty. - Petroleum engineers and managers get critical material on evaluation, prevention, and remediation of formation damage which can save or cost millions in profits from a mechanistic point of view - State-of-the-Art knowledge and valuable insights into the nature of processes and operational practices causing formation damage - Provides new strategies designed to minimize the impact of and avoid formation damage in petroleum reservoirs with the newest drilling, monitoring, and detection techniques
Download or read book Phase Behavior written by Curtis H. Whitson and published by Society of Petroleum Engineers. This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Behavior provides the reader with the tools needed to solve problems requiring a description of phase behavior and specific pressure/volume/temperature (PVT) properties.
Download or read book Advances in the Study of Fractured Reservoirs written by G.H. Spence and published by Geological Society of London. This book was released on 2014-08-27 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Naturally fractured reservoirs constitute a substantial percentage of remaining hydrocarbon resources; they create exploration targets in otherwise impermeable rocks, including under-explored crystalline basement; and they can be used as geological stores for anthropogenic carbon dioxide. Their complex behaviour during production has traditionally proved difficult to predict, causing a large degree of uncertainty in reservoir development. The applied study of naturally fractured reservoirs seeks to constrain this uncertainty by developing new understanding, and is necessarily a broad, integrated, interdisciplinary topic. This book addresses some of the challenges and advances in knowledge, approaches, concepts, and methods used to characterize the interplay of rock matrix and fracture networks, relevant to fluid flow and hydrocarbon recovery. Topics include: describing, characterizing and identifying controls on fracture networks from outcrops, cores, geophysical data, digital and numerical models; geomechanical influences on reservoir behaviour; numerical modelling and simulation of fluid flow; and case studies of the exploration and development of carbonate, siliciclastic and metamorphic naturally fractured reservoirs.
Download or read book Enhanced Oil Recovery Field Case Studies written by James J.Sheng and published by Gulf Professional Publishing. This book was released on 2013-04-10 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced Oil Recovery Field Case Studies bridges the gap between theory and practice in a range of real-world EOR settings. Areas covered include steam and polymer flooding, use of foam, in situ combustion, microorganisms, "smart water"-based EOR in carbonates and sandstones, and many more. Oil industry professionals know that the key to a successful enhanced oil recovery project lies in anticipating the differences between plans and the realities found in the field. This book aids that effort, providing valuable case studies from more than 250 EOR pilot and field applications in a variety of oil fields. The case studies cover practical problems, underlying theoretical and modeling methods, operational parameters, solutions and sensitivity studies, and performance optimization strategies, benefitting academicians and oil company practitioners alike. - Strikes an ideal balance between theory and practice - Focuses on practical problems, underlying theoretical and modeling methods, and operational parameters - Designed for technical professionals, covering the fundamental as well as the advanced aspects of EOR
Download or read book Waterflooding written by G. Paul Willhite and published by . This book was released on 1986 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waterflooding begins with understanding the basic principles of immiscible displacement, then presents a systematic procedure for designing a waterflood.
Download or read book The Mathematics of Reservoir Simulation written by Richard E. Ewing and published by SIAM. This book was released on 2014-12-01 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state of the art of the mathematical theory and numerical analysis of imaging. Some of the applications covered in the book include computerized tomography, magnetic resonance imaging, emission tomography, electron microscopy, ultrasound transmission tomography, industrial tomography, seismic tomography, impedance tomography, and NIR imaging.
Download or read book Theory of Gas Injection Processes written by and published by . This book was released on 1999 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
