Download or read book Parachute Recovery Systems written by Theo W. Knacke and published by . This book was released on 1992 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide recovery system engineers in government and industry with tools to evaluate, analyze, select, and design parachute recovery systems. These systems range from simple, one-parachute assemblies to multiple-parachute systems, and may include equipment for impact attenuation, flotation, location, retrieval, and disposition. All system aspects are discussed, including the need for parachute recovery, the selection of the most suitable recovery system concept, concept analysis, parachute performance, force and stress analysis, material selection, parachute assembly and component design, and manufacturing. Experienced recovery system engineers will find this publication useful as a technical reference book; recent college graduates will find it useful as a textbook for learning about parachutes and parachute recovery systems; and technicians with extensive practical experience will find it useful as an engineering textbook that includes a chapter on parachute- related aerodynamics. In this manual, emphasis is placed on aiding government employees in evaluating and supervising the design and application of parachute systems. The parachute recovery system uses aerodynamic drag to decelerate people and equipment moving in air from a higher velocity to a lower velocity and to a safe landing. This lower velocity is known as rate of descent, landing velocity, or impact velocity, and is determined by the following requirements: (1) landing personnel uninjured and ready for action, (2) landing equipment and air vehicles undamaged and ready for use or refurbishment, and (3) impacting ordnance at a preselected angle and velocity.
Download or read book Aircraft Design written by Daniel P. Raymer and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the Summerfield Book Award Winner of the Aviation-Space Writers Association Award of Excellence. --Over 30,000 copies sold, consistently the top-selling AIAA textbook title This highly regarded textbook presents the entire process of aircraft conceptual designfrom requirements definition to initial sizing, configuration layout, analysis, sizing, and trade studiesin the same manner seen in industry aircraft design groups. Interesting and easy to read, the book has more than 800 pages of design methods, illustrations, tips, explanations, and equations, and extensive appendices with key data essential to design. It is the required design text at numerous universities around the world, and is a favorite of practicing design engineers.
Download or read book The Smell of Kerosene written by National Aeronautics and Space Administration and published by DigiCat. This book was released on 2022-11-13 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book puts the reader in the pilot's seat for a "day at the office" unlike any other. The Smell of Kerosene tells the dramatic story of a NASA research pilot who logged over 11,000 flight hours in more than 125 types of aircraft. Donald Mallick gives the reader fascinating first-hand description of his early naval flight training, carrier operations, and his research flying career with NASA. After transferring to the NASA Flight Research Center, Mallick became involved with projects that further pushed the boundaries of aerospace technology. These included the giant delta-winged XB-70 supersonic airplane, the wingless M2-F1 lifting body vehicle, and triple-sonic YF-12 Blackbird. Mallick also test flew the Lunar Landing Research Vehicle and helped develop techniques used in training astronauts to land on the Moon.
Download or read book Aircraft Design Projects written by Lloyd R. Jenkinson and published by Elsevier. This book was released on 2003-04-28 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written with students of aerospace or aeronautical engineering firmly in mind, this is a practical and wide-ranging book that draws together the various theoretical elements of aircraft design - structures, aerodynamics, propulsion, control and others - and guides the reader in applying them in practice. Based on a range of detailed real-life aircraft design projects, including military training, commercial and concept aircraft, the experienced UK and US based authors present engineering students with an essential toolkit and reference to support their own project work.All aircraft projects are unique and it is impossible to provide a template for the work involved in the design process. However, with the knowledge of the steps in the initial design process and of previous experience from similar projects, students will be freer to concentrate on the innovative and analytical aspects of their course project. The authors bring a unique combination of perspectives and experience to this text. It reflects both British and American academic practices in teaching aircraft design. Lloyd Jenkinson has taught aircraft design at both Loughborough and Southampton universities in the UK and Jim Marchman has taught both aircraft and spacecraft design at Virginia Tech in the US.* Demonstrates how basic aircraft design processes can be successfully applied in reality* Case studies allow both student and instructor to examine particular design challenges * Covers commercial and successful student design projects, and includes over 200 high quality illustrations
Download or read book Memoirs of an Aeronautical Engineer written by Seth B Anderson and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book The Power for Flight written by Jeremy R. Kinney and published by Government Printing Office. This book was released on 2018-02-15 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NACA and aircraft propulsion, 1915-1958 -- NASA gets to work, 1958-1975 -- The shift toward commercial aviation, 1966-1975 -- The quest for propulsive efficiency, 1976-1989 -- Propulsion control enters the computer era, 1976-1998 -- Transiting to a new century, 1990-2008 -- Toward the future
Download or read book Annual Report for the Fiscal Year written by National Library of Medicine (U.S.) and published by . This book was released on 1959 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technology and the Air Force written by Jacob Neufeld and published by DIANE Publishing. This book was released on 2009-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium co-sponsored by the Air Force Historical Foundation and the Air Force History and Museums Program. The symposium covered relevant Air Force technologies ranging from the turbo-jet revolution of the 1930s to the stealth revolution of the 1990s. Illustrations.
Download or read book Fundamentals of Aircraft and Rocket Propulsion written by Ahmed F. El-Sayed and published by Springer. This book was released on 2016-05-25 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive basics-to-advanced course in an aero-thermal science vital to the design of engines for either type of craft. The text classifies engines powering aircraft and single/multi-stage rockets, and derives performance parameters for both from basic aerodynamics and thermodynamics laws. Each type of engine is analyzed for optimum performance goals, and mission-appropriate engines selection is explained. Fundamentals of Aircraft and Rocket Propulsion provides information about and analyses of: thermodynamic cycles of shaft engines (piston, turboprop, turboshaft and propfan); jet engines (pulsejet, pulse detonation engine, ramjet, scramjet, turbojet and turbofan); chemical and non-chemical rocket engines; conceptual design of modular rocket engines (combustor, nozzle and turbopumps); and conceptual design of different modules of aero-engines in their design and off-design state. Aimed at graduate and final-year undergraduate students, this textbook provides a thorough grounding in the history and classification of both aircraft and rocket engines, important design features of all the engines detailed, and particular consideration of special aircraft such as unmanned aerial and short/vertical takeoff and landing aircraft. End-of-chapter exercises make this a valuable student resource, and the provision of a downloadable solutions manual will be of further benefit for course instructors.
Download or read book Wingless Flight written by R. Dale Reed, Darlene Lister and published by University Press of Kentucky. This book was released on with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Much has been written about the famous conflicts and battlegrounds of the East during the American Revolution. Perhaps less familiar, but equally important and exciting, was the war on the western frontier, where Ohio Valley settlers fought for the land they had claimed -- and for their very lives. George Rogers Clark stepped forward to organize the local militias into a united front that would defend the western frontier from Indian attacks. Clark was one of the few people who saw the importance of the West in the war effort as a whole, and he persuaded Virginia's government to lend support to his efforts. As a result Clark was able to cross the Ohio, saving that part of the frontier from further raids. Lowell Harrison captures the excitement of this vital part of American history while giving a complete view of George Rogers Clark's significant achievements. Lowell H. Harrison, is a professor emeritus of history at Western Kentucky University and is the author or co-author of numerous books, including Lincoln of Kentucky, A New History of Kentucky, and Kentucky's Governors."
Download or read book Airplane Aerodynamics and Performance written by Jan Roskam and published by DARcorporation. This book was released on 1997 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cave of the Winds written by Joseph R. Chambers and published by NASA. This book was released on 2014 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design and Engineering of Curiosity written by Emily Lakdawalla and published by Springer. This book was released on 2018-03-27 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most complex machine ever sent to another planet: Curiosity. It is a one-ton robot with two brains, seventeen cameras, six wheels, nuclear power, and a laser beam on its head. No one human understands how all of its systems and instruments work. This essential reference to the Curiosity mission explains the engineering behind every system on the rover, from its rocket-powered jetpack to its radioisotope thermoelectric generator to its fiendishly complex sample handling system. Its lavishly illustrated text explains how all the instruments work -- its cameras, spectrometers, sample-cooking oven, and weather station -- and describes the instruments' abilities and limitations. It tells you how the systems have functioned on Mars, and how scientists and engineers have worked around problems developed on a faraway planet: holey wheels and broken focus lasers. And it explains the grueling mission operations schedule that keeps the rover working day in and day out.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unlimited Horizons written by Peter W. Merlin and published by . This book was released on 2015 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a stopgap measure to provide overhead reconnaissance capability during the early years of the Cold War, the versatile U-2 has since evolved to meet changing requirements well into the 21st century. Though many authors have documented the airplane's operational history, few have made more than a cursory examination of its technical aspects or its role as a NASA research platform. This volume includes an overview of the origin and development of the Lockheed U-2 family of aircraft with early National Advisory Committee for Aeronautics (NACA) and National Aeronautics and Space Administration (NASA) involvement, construction and materials challenges faced by designers and builders, releasable performance characteristics and capabilities, use of U-2 and ER-2 airplanes as research platforms, and technical and programmatic lessons learned.
Download or read book Tactical Missile Aerodynamics written by and published by . This book was released on 1992 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Theory written by G.F.C. Rogers and published by Pearson Higher Ed. This book was released on 2017-06-07 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the First Edition of this book was written in 1951, the gas turbine was just becoming established as a powerplant for military aircraft. It took another decade before the gas turbine was introduced to civil aircraft, and this market developed so rapidly that the passenger liner was rendered obsolete. Other markets like naval propulsion, pipeline compression and electrical power applications grew steadily. In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. The addition of a chapter devoted to the mechanical design of gas turbines greatly enhances the scope of the book. Descriptions of engine developments and current markets make this book useful to both students and practising engineers.
