Download or read book Effect of two advanced noise reduction technologies on the aerodynamic performance of an ultra high bypass ratio fan written by and published by . This book was released on 2013 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic Performance of Novel Fan Noise Reduction Technologies for a High Bypass Model Turbofan at Simulated Flights Conditions written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-22 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two novel fan noise reduction technologies, over the rotor acoustic treatment and soft stator vane technologies, were tested in an ultra-high bypass ratio turbofan model in the NASA Glenn Research Center s 9- by 15-Foot Low-Speed Wind Tunnel. The performance of these technologies was compared to that of the baseline fan configuration, which did not have these technologies. Sideline acoustic data and hot film flow data were acquired and are used to determine the effectiveness of the various treatments. The material used for the over the rotor treatment was foam metal and two different types were used. The soft stator vanes had several internal cavities tuned to target certain frequencies. In order to accommodate the cavities it was necessary to use a cut-on stator to demonstrate the soft vane concept. Elliott, David M. and Woodward, Richard P. and Podboy, Gary G. Glenn Research Center ACOUSTIC PROPERTIES; AERODYNAMIC NOISE; TURBOFANS; NOISE REDUCTION; BYPASS RATIO; WIND TUNNELS; FAN BLADES; VANES
Download or read book Acoustic and Aerodynamic Performance of a 6 foot diameter Fan for Turbofan Engines written by Arthur W. Goldstein and published by . This book was released on 1970 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low noise turbofan engine without aerodynamic blade loading.
Download or read book Comprehensive Report of Fan Performance from Duct Rake Instrumentation on 1 294 Pressure Ratio 806 Ft sec Tip Speed Turbofan Simulator Models written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-15 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large scale model representative of an advanced ducted propulsor-type, low-noise, very high bypass ratio turbofan engine was tested for acoustics, aerodynamic performance, and off-design operability in the NASA Glenn 9- by 15-Foot Low-Speed Wind Tunnel. The test was part of NASA s Advanced Subsonic Technology Noise Reduction Program. The low tip speed fan, nacelle, and un-powered core passage were simulated. As might be expected, the effect of stall management casing treatment was a performance penalty. Reducing the recirculating flow at the fan tip reduced the penalty while still providing sufficient stall margin. Two fans were tested with the same aerodynamic design; one with graphite composite material, and the other with solid titanium. There were surprising performance differences between the two fans, though both blades showed some indication of transitional flow near the tips. Though the pressure and temperature ratios were low for this fan design, the techniques used to improve thermocouple measurement accuracy gave repeatable data with adiabatic efficiencies agreeing within 1 percent. The measured fan adiabatic efficiency at simulated takeoff conditions was 93.7 percent and matched the design intent. Jeracki, Robert J. Glenn Research Center WBS 22-781-30-50
Download or read book Acoustic Performance of Novel Fan Noise Reduction Technologies for a High Bypass Model Turbofan at Simulated Flights Conditions written by David M. Elliott and published by BiblioGov. This book was released on 2013-07 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two novel fan noise reduction technologies, over the rotor acoustic treatment and soft stator vane technologies, were tested in an ultra-high bypass ratio turbofan model in the NASA Glenn Research Center s 9- by 15-Foot Low-Speed Wind Tunnel. The performance of these technologies was compared to that of the baseline fan configuration, which did not have these technologies. Sideline acoustic data and hot film flow data were acquired and are used to determine the effectiveness of the various treatments. The material used for the over the rotor treatment was foam metal and two different types were used. The soft stator vanes had several internal cavities tuned to target certain frequencies. In order to accommodate the cavities it was necessary to use a cut-on stator to demonstrate the soft vane concept.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Bypass Nozzle Exit Area on Fan Aerodynamic Performance and Noise in a Model Turbofan Simulator written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-22 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of effective new technologies to reduce aircraft propulsion noise is dependent on identifying and understanding the noise sources and noise generation mechanisms in the modern turbofan engine, as well as determining their contribution to the overall aircraft noise signature. Therefore, a comprehensive aeroacoustic wind tunnel test program was conducted called the Fan Broadband Source Diagnostic Test as part of the NASA Quiet Aircraft Technology program. The test was performed in the anechoic NASA Glenn 9- by 15-Foot Low Speed Wind Tunnel using a 1/5 scale model turbofan simulator which represented a current generation, medium pressure ratio, high bypass turbofan aircraft engine. The investigation focused on simulating in model scale only the bypass section of the turbofan engine. The test objectives were to: identify the noise sources within the model and determine their noise level; investigate several component design technologies by determining their impact on the aerodynamic and acoustic performance of the fan stage; and conduct detailed flow diagnostics within the fan flow field to characterize the physics of the noise generation mechanisms in a turbofan model. This report discusses results obtained for one aspect of the Source Diagnostic Test that investigated the effect of the bypass or fan nozzle exit area on the bypass stage aerodynamic performance, specifically the fan and outlet guide vanes or stators, as well as the farfield acoustic noise level. The aerodynamic performance, farfield acoustics, and Laser Doppler Velocimeter flow diagnostic results are presented for the fan and four different fixed-area bypass nozzle configurations. The nozzles simulated fixed engine operating lines and encompassed the fan stage operating envelope from near stall to cruise. One nozzle was selected as a baseline reference, representing the nozzle area which would achieve the design point operating conditions and fan stage performance. The total area change from the smallest to the largest nozzle was 12.9 percent of the baseline nozzle area. The results will show that there are significant changes in aerodynamic performance and farfield acoustics as the fan nozzle area is increased. The weight flow through the fan model increased between 7 and 9 percent, the fan and stage pressure dropped between 8 and 10 percent, and the adiabatic efficiency increased between 2 and 3 percent--the magnitude of the change dependent on the fan speed. Results from force balance measurements of fan and outlet guide vane thrust will show that as the nozzle exit area is increased the combined thrust of the fan and outlet guide vanes together also increases, between 2 and 3.5 percent, mainly due to the increase in lift from the outlet guide vanes. In terms of farfield acoustics, the overall sound power level produced by the fan stage dropped nearly linearly between 1 dB at takeoff condition and 3.5 dB at approach condition, mainly due to a decrease in the broadband n
Download or read book Aerodynamic Performance of Scale Model Turbofan Outlet Guide Vanes Designed for Low Noise written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-05-30 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of effective new technologies to reduce aircraft propulsion noise is dependent on an understanding of the noise sources and noise generation mechanisms in the modern turbofan engine. In order to more fully understand the physics of noise in a turbofan engine, a comprehensive aeroacoustic wind tunnel test programs was conducted called the 'Source Diagnostic Test.' The text was cooperative effort between NASA and General Electric Aircraft Engines, as part of the NASA Advanced Subsonic Technology Noise Reduction Program. A 1/5-scale model simulator representing the bypass stage of a current technology high bypass ratio turbofan engine was used in the test. The test article consisted of the bypass fan and outlet guide vanes in a flight-type nacelle. The fan used was a medium pressure ratio design with 22 individual, wide chord blades. Three outlet guide vane design configurations were investigated, representing a 54-vane radial Baseline configuration, a 26-vane radial, wide chord Low Count configuration and a 26-vane, wide chord Low Noise configuration with 30 deg of aft sweep. The test was conducted in the NASA Glenn Research Center 9 by 15-Foot Low Speed Wind Tunnel at velocities simulating the takeoff and approach phases of the aircraft flight envelope. The Source Diagnostic Test had several acoustic and aerodynamic technical objectives: (1) establish the performance of a scale model fan selected to represent the current technology turbofan product; (2) assess the performance of the fan stage with each of the three distinct outlet guide vane designs; (3) determine the effect of the outlet guide vane configuration on the fan baseline performance; and (4) conduct detailed flowfield diagnostic surveys, both acoustic and aerodynamic, to characterize and understand the noise generation mechanisms in a turbofan engine. This paper addresses the fan and stage aerodynamic performance results from the Source Diagnostic Test.Hughes, Christopher E.Glenn Research Cente
Download or read book Acoustic Performance of Novel Fan Noise Reduction written by National Aeronautics and Space Administration (NASA) and published by . This book was released on 2010-11-01 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two novel fan noise reduction technologies, over the rotor acoustic treatment and soft stator vane technologies, were tested in an ultra-high bypass ratio turbofan model in the NASA Glenn Research Center's 9- by 15-Foot Low-Speed Wind Tunnel. The performance of these technologies was compared to that of the baseline fan configuration, which did not have these technologies. Sideline acoustic data and hot film flow data were acquired and are used to determine the effectiveness of the various treatments. The material used for the over the rotor treatment was foam metal and two different types were used. The soft stator vanes had several internal cavities tuned to target certain frequencies. In order to accommodate the cavities it was necessary to use a cut-on stator to demonstrate the soft vane concept.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1992 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book An Investigation of Innovative Technologies for Reduction of Jet Noise in Medium and High Bypass Turbofan Engines written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This research project has developed a new, large-scale, nozzle acoustic test rig capable of simulating the exhaust flows of separate flow exhaust systems in medium and high bypass turbofan engines. This rig has subsequently been used to advance the understanding of two state-of-the-art jet noise reduction technologies. The first technology investigated is an emerging jet noise reduction technology known as chevron nozzles. The fundamental goal of this investigation was to advance the understanding of the fundamental physical mechanisms responsible for the acoustic benefits provided by these nozzles. Additionally, this study sought to establish the relationship between these physical mechanisms and the chevron geometric parameters. A comprehensive set of data was collected, including far-field and near-field acoustic data as well as flow field measurements. In addition to illustrating the ability of the chevron nozzles to provide acoustic benefits in important aircraft certification metrics such as effective perceived noise level (EPNL), this investigation successfully identified two of the fundamental physical mechanisms responsible for this reduction. The flow field measurements showed the chevron to redistribute energy between the core and fan streams to effectively reduce low frequency noise by reducing the length of the jet potential core. However, this redistribution of energy produced increases in turbulent kinetic energy of up to 45% leading to a degradation of the chevron benefit at higher frequencies ... plane to reduce jet noise. The principal advantage of such an approach is that it is an active technology that can be activated as needed and, as such, may be more acceptable in aircraft engines from a performance standpoint than passive technologies. This study successfully demonstrated the feasibility of this technology by showing that effective jet noise reduction can be provided in a broad range of flow conditions using less than 1% of the mean jet mass flow. An investigation of injection geometric parameters identified the injection pitch angle as the most influential parameter with respect to jet noise reduction. Furthermore, an investigation of scaling effects showed a momentum ratio of approximately 1.5% to provide reductions in sound pressure level between 1 and 2 dB across a wide range of frequencies for a wide range of flow conditions and scales including both single stream and dual stream flows. PIV flow field measurements identified the fundamental physical mechanism of the noise reduction to be a near uniform reduction in shear layer turbulence.
Download or read book NASA Authorization for Fiscal Year 1974 written by United States. Congress. Senate. Committee on Aeronautical and Space Sciences and published by . This book was released on 1973 with total page 1870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic and Aerodynamic Performance of a 6 foot diameter Fan for Turbofan Engines written by Edward J. Rice and published by . This book was released on 1971 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1993 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerodynamic Performance of Scale Model Turbofan Outlet Guide Vanes Designed for Low Noise written by and published by . This book was released on 2001 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The National Academy of Sciences Decadal Plan for Aeronautics written by United States. Congress. House. Committee on Science. Subcommittee on Space and Aeronautics and published by . This book was released on 2007 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
