Download or read book Effect of the Reaction Sequence of an Epoxy Polybutadiene Acrylate Interpenetrating Polymer Network Properties written by Kathryn Grace Bearden and published by . This book was released on 2012 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interpenetrating polymer networks (IPNs), where polymer chains mechanically entangle during network formation, are of interest for their unique properties. The reaction sequence of a DGEBF epoxy/polybutadiene-dimethacrylate simultaneous IPN system was varied with differing catalysts to observe the correlation between reaction steps and physical properties. When the acrylate components were reacted first an IPN with two glass transitions and discrete phase separation was observed via scanning electron microscopy (SEM). When all components were reacted in parallel, two glass transitions were also observed but the morphology presented a single phase or a visible macro phase seperation. The IPN showed an increase in fracture toughness but a decrease in tensile strength compared to the single phase system and an epoxy control. Varying the amounts of polybutadiene-dimethacrylate in relation to the epoxy also showed a limit to the toughening effect.
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1995-07 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interpenetrating Polymer Networks written by Daniel Klempner and published by . This book was released on 1994 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive review of interpenetrating polymer networks. Opens with four review chapters by important workers in the field--Sperling, Klempner, Utracki, and Lipatov- and continues with an international penetration of current research. Covers synthesis and structure, miscibility and morphology, structure-property relationships, transport and permeability, and functionalized triglyceride oils.
Download or read book Polymer Mechanochemistry written by Roman Boulatov and published by Springer. This book was released on 2015-10-17 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Topics in Current Chemistry presents critical reviews of the present and future trends in modern chemical research. The scope of coverage is all areas of chemical science including the interfaces with related disciplines such as biology, medicine and materials science. The goal of each thematic volume is to give the non-specialist reader, whether in academia or industry, a comprehensive insight into an area where new research is emerging which is of interest to a larger scientific audience. Each review within the volume critically surveys one aspect of that topic and places it within the context of the volume as a whole. The most significant developments of the last 5 to 10 years are presented using selected examples to illustrate the principles discussed. The coverage is not intended to be an exhaustive summary of the field or include large quantities of data, but should rather be conceptual, concentrating on the methodological thinking that will allow the non-specialist reader to understand the information presented. Contributions also offer an outlook on potential future developments in the field. Review articles for the individual volumes are invited by the volume editors. Readership: research chemists at universities or in industry, graduate students.
Download or read book Handbook of Epoxy Blends written by Jyotishkumar Parameswaranpillai and published by Springer. This book was released on 2017-07-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work compiles and summarizes the available information on epoxy blends. It covers all essential areas – the synthesis, processing, characterization and applications of epoxy blends – in a comprehensive manner. The handbook is highly application-oriented and thus serves as a valuable, authoritative reference guide for researchers, engineers, and technologists working on epoxy blends, but also for graduate and postgraduate students, polymer chemists, and faculties at universities and colleges.The handbook is divided into three parts and organized by the types of blends and components: Part I covers epoxy rubber blends, Part II focuses on epoxy thermoplastic blends, and Part III examines epoxy block-copolymer blends. Each part starts with an introduction, and the individual chapters provide readers with comprehensive information on the synthesis and processing, analysis and characterization, properties and applications of the different epoxy blends. All parts conclude with a critical evaluation of the applications, weighing their advantages and drawbacks. Leading international experts from corporate and academic research institutions and universities discuss the correlations of different epoxy blend properties with their macro-, micro- and nanostructures. This handbook thus offers a rich resource for newcomers to the field, and a major reference work for experienced researchers, the first of its kind available on the market. As epoxies find extremely broad applications, e.g. in oil & gas, in the chemical industry, building and construction industry, automotive, aviation and aerospace, boat building and marine applications, in adhesives and coatings, and many more, this handbook addresses researchers and practitioners from all these fields.
Download or read book Compendium of Polymer Terminology and Nomenclature written by Richard G Jones and published by Royal Society of Chemistry. This book was released on 2009-01-19 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUPAC system of polymer nomenclature has aided the generation of unambiguous names that re ect the historical development of chemistry. However, the explosion in the circulation of information and the globalization of human activities mean that it is now necessary to have a common language for use in legal situations, patents, export-import regulations, and environmental health and safety information. Rather than recommending a ‘unique name’ for each structure, rules have been developed for assigning ‘preferred IUPAC names’, while continuing to allow alternatives in order to preserve the diversity and adaptability of nomenclature. Compendium of Polymer Terminology and Nomenclature is the only publication to collect the most important work on this subject into a single volume. It serves as a handy compendium for scientists and removes the need for time consuming literature searches. One of a series issued by the International Union of Pure and Applied Chemistry (IUPAC), it covers the terminology used in many and varied aspects of polymer science as well as the nomenclature of several di erent types of polymer including regular and irregular single-strand organic polymers, copolymers and regular double-strand (ladder and spiro) organic polymers.
Download or read book Properties of Polymers written by D.W. van Krevelen and published by Elsevier. This book was released on 2012-12-02 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Properties of Polymers: Their Correlation with Chemical Structure; Their Numerical Estimation and Prediction from Additive Group Contributions summarizes the latest developments regarding polymers, their properties in relation to chemical structure, and methods for estimating and predicting numerical properties from chemical structure. In particular, it examines polymer electrical properties, magnetic properties, and mechanical properties, as well as their crystallization and environmental behavior and failure. The rheological properties of polymer melts and polymer solutions are also considered. Organized into seven parts encompassing 27 chapters, this book begins with an overview of polymer science and engineering, including the typology of polymers and their properties. It then turns to a discussion of thermophysical properties, from transition temperatures to volumetric and calorimetric properties, along with the cohesive aspects and conformation statistics. It also introduces the reader to the behavior of polymers in electromagnetic and mechanical fields of force. The book covers the quantities that influence the transport of heat, momentum, and matter, particularly heat conductivity, viscosity, and diffusivity; properties that control the chemical stability and breakdown of polymers; and polymer properties as an integral concept, with emphasis on processing and product properties. Readers will find tables that give valuable (numerical) data on polymers and include a survey of the group contributions (increments) of almost every additive function considered. This book is a valuable resource for anyone working on practical problems in the field of polymers, including organic chemists, chemical engineers, polymer processers, polymer technologists, and both graduate and PhD students.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Thermal Analysis of Polymeric Materials written by Bernhard Wunderlich and published by Springer Science & Business Media. This book was released on 2005-04-04 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of Contents Table of Contents 1 Atoms, small, and large molecules 2 Basics of thermal analysis 3 Dynamics of chemical and phase changes 4 Thermal analysis tools 5 Structure and properties of materials 6 Single component materials 7 Multiple component materials App. A.1 Table of thermal properties of linear macromolecules and related small molecules - the ATHAS data bank App. A.2 Radiation scattering App. A.3 Derivation of the Rayleigh ratio App. A.4 Neural network predictions App. A.5 Legendre transformations, Maxwell relations, linking of entropy and probability, and derivation of (dS/dT) App. A.6 Boltzmann distribution, harmonic vibration, complex numbers, and normal modes App. A.7 Summary of the basic kinetics of chemical reactions App. A.8 The ITS 1990 and the Krypton-86 length standard App. A.9 Development of classical DTA to DSC App. A.10 Examples of DTA and DSC under extreme conditions App. A.11 Description of an online correction of the heat-flow rate App. A.12 Derivation of the heat-flow equations App. A.13 Description of sawtooth-modulation response App. A.14 An introduction to group theory, definitions of configurations and conformations, and a summary of rational and irrational numbers App. A.15 Summary of birefringence and polarizing microscopy App. A.16 Summary of X-ray diffraction and interference effects App. A.17 Optical analog of electron double diffraction to produce Moire patterns.
Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.
Download or read book Structure Property Relationships in Polymers written by Charles E. Carraher Jr. and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first concern of scientists who are interested in synthetic polymers has always been, and still is: How are they synthesized? But right after this comes the question: What have I made, and for what is it good? This leads to the important topic of the structure-property relations to which this book is devoted. Polymers are very large and very complicated systems; their character ization has to begin with the chemical composition, configuration, and con formation of the individual molecule. The first chapter is devoted to this broad objective. The immediate physical consequences, discussed in the second chapter, form the basis for the physical nature of polymers: the supermolecular interactions and arrangements of the individual macromolecules. The third chapter deals with the important question: How are these chemical and physical structures experimentally determined? The existing methods for polymer characterization are enumerated and discussed in this chapter. The following chapters go into more detail. For most applications-textiles, films, molded or extruded objects of all kinds-the mechanical and the thermal behaviors of polymers are of pre ponderant importance, followed by optical and electric properties. Chapters 4 through 9 describe how such properties are rooted in and dependent on the chemical structure. More-detailed considerations are given to certain particularly important and critical properties such as the solubility and permeability of polymeric systems. Macromolecules are not always the final goal of the chemist-they may act as intermediates, reactants, or catalysts. This topic is presented in Chapters 10 and 11.
Download or read book Principles of Polymerization written by George Odian and published by John Wiley & Sons. This book was released on 2004-02-09 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of a classic text and reference The large chains of molecules known as polymers are currently used in everything from "wash and wear" clothing to rubber tires to protective enamels and paints. Yet the practical applications of polymers are only increasing; innovations in polymer chemistry constantly bring both improved and entirely new uses for polymers onto the technological playing field. Principles of Polymerization, Fourth Edition presents the classic text on polymer synthesis, fully updated to reflect today's state of the art. New and expanded coverage in the Fourth Edition includes: * Metallocene and post-metallocene polymerization catalysts * Living polymerizations (radical, cationic, anionic) * Dendrimer, hyperbranched, brush, and other polymer architectures and assemblies * Graft and block copolymers * High-temperature polymers * Inorganic and organometallic polymers * Conducting polymers * Ring-opening polymer ization * In vivo and in vitro polymerization Appropriate for both novice and advanced students as well as professionals, this comprehensive yet accessible resource enables the reader to achieve an advanced, up-to-date understanding of polymer synthesis. Different methods of polymerization, reaction parameters for synthesis, molecular weight, branching and crosslinking, and the chemical and physical structure of polymers all receive ample coverage. A thorough discussion at the elementary level prefaces each topic, with a more advanced treatment following. Yet the language throughout remains straightforward and geared towards the student. Extensively updated, Principles of Polymerization, Fourth Edition provides an excellent textbook for today's students of polymer chemistry, chemical engineering, and materials science, as well as a current reference for the researcher or other practitioner working in these areas.
Download or read book Chemistry and Technology of Cyanate Ester Resins written by I. Hamerton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: After epoxy resins and polyimides, cyanate esters arguably form the most well-developed group of high-temperature, thermosetting polymers. They possess a number of desirable performance characteristics which make them of increasing technological importance, where their somewhat higher costs are acceptable. The principal end uses for cyanate esters are as matrix resins for printed wiring board laminates and structural composites. For the electronics markets, the low dielectric loss characteristics, dimen sional stability at molten solder temperatures and excellent adhesion to conductor metals at temperatures up to 250°C, are desirable. In their use in aerospace composites, unmodified cyanate esters offer twice the frac ture toughness of multifunctional epoxies, while achieving a service tem perature intermediate between epoxy and bis-maleimide capabilities. Applications in radome construction and aircraft with reduced radar signatures utilize the unusually low capacitance properties of cyanate esters and associated low dissipation factors. While a number of commercial cyanate ester monomers and prepoly mers are now available, to date there has been no comprehensive review of the chemistry and recent technological applications of this versatile family of resins. The aims of the present text are to present these in a com pact, readable form. The work is primarily aimed at materials scientists and polymer technologists involved in research and development in the chemical, electronics, aerospace and adhesives industries. It is hoped that advanced undergraduates and postgraduates in polymer chemistry and technology, and materials science/technology will find it a useful introduc tion and source of reference in the course of their studies.
Download or read book Inorganic Whisker Reinforced Polymer Composites written by Qiuju Sun and published by CRC Press. This book was released on 2015-08-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inorganic-Whisker-Reinforced Polymer Composites: Synthesis, Properties and Applications gives a comprehensive presentation of inorganic microcrystalline fibers, or whiskers, a polymer composite filler. It covers whisker synthesis, surface modification, applications for reinforcing polymer-matrix composites, and analysis of resulting filled polymer
Download or read book Advances in Elastomers I written by P. M. Visakh and published by Springer Science & Business Media. This book was released on 2013-03-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers. “Advances in Elastomers” discusses the various attempts reported on solving these problems from the point of view of the chemistry and the structure of elastomers, highlighting the drawbacks and advantages of each method. It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites. This first volume focuses on advances on the blends and interpenetrating networks (IPNs) of elastomers.
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book The Engineering Index Annual written by and published by . This book was released on 1988 with total page 2282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
