Download or read book Effect of the Processing Conditions on the Microstructural Features and Mechanical Behavior of Aluminum Alloys written by Tomasz Tański and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminum and aluminum alloys are widely used for aircraft structures, where they are subjected to demanding conditions and where is an increased demand for weight reduction and fuel savings. Aluminum comprises 8% of the earth?s crust and is, therefore, the most abundant structural metal. Its production since 1965 has surpassed that of copper and now comes next to iron. This increased use of aluminum alloys leads to a need for deeper understanding of their mechanical properties and the impacts of processing parameters. The mechanical properties can determine by controlling the microstructures of the alloys. For example, precipitation hardening is the main strengthening mechanism improving the tensile and yield strength. Solute atoms, precipitates and dispersoids influences to the yield strength, since they act as distributed pinning points for mobile dislocations, thus increasing the shear stress required to move the dislocations. Another approach is the manipulation of a grain size that can be performed by alloying or plastic deformation processes. Therefore, the precise understanding of each mechanism that can influence the properties of aluminum and its alloys is very important. The aim of this chapter is to shed light on the influence of the processing history on the microstructure and mechanical properties.
Download or read book Aluminium Alloys written by Subbarayan Sivasankaran and published by BoD – Books on Demand. This book was released on 2017-12-21 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major issue of energy saving and conservation of the environment in the world is being emphasized to us to concentrate on lightweight materials in which aluminium alloys are contributing more in applications in the twenty-first century. Aluminium and its related materials possess lighter weight, considerable strength, more corrosion resistance and ductility. Especially from the past one decade, the use of aluminium alloys is increasing in construction field, transportation industries, packaging purposes, automotive, defence, aircraft and electrical sectors. Around 85% is being used in the form of wrought products, which replace the use of cast iron. Further, the major features of aluminium alloy are recyclability and its abundant availability in the world. In general, aluminium and its related materials are being processed via casting, drawing, forging, rolling, extrusion, welding, powder metallurgy process, etc. To improve the physical and mechanical properties, scientists are doing more research and adding some second-phase particles in to it called composites in addition to heat treatment. Therefore, to explore more in this field, the present book has been aimed and focused to bridge all scientists who are working in this field. The main objective of the present book is to focus on aluminium, its alloys and its composites, which include, but are not limited to, the various processing routes and characterization techniques in both macro- and nano-levels.
Download or read book The Effect of Processing and Microstructure on the Mechanical Properties of Aluminum Alloy 339 T5 written by Paul Noles Crepeau and published by . This book was released on 1989 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Casting Aluminum Alloys written by Michael V Glazoff and published by Elsevier. This book was released on 2010-07-07 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casting Aluminum Alloys summarizes research conducted at Moscow Institute of Steel and Alloy during many decades in part together with Alcoa Inc. The research covered areas of the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing. Emphasis on interconnection among phase equilibria, thermodynamics and microstructure of alloys Systematic overview of all phase diagrams with Al that are important for the development of casting aluminium alloys Diagrams ("processing windows") of important technological properties such as castability, molten metal fluidity, tendency to hot pre-solidification cracking, porosity Mathematical models for alloy mechanical properties facilitating the down-selection of best prospect candidates for new alloy development New principles of design of eutectic casting aluminium alloys Examples of successful novel casting alloy development, including alloys for high-strength applications, alloys with transition metals, and novel alloys utilizing aluminium scrap
Download or read book Effects of Composition and Primary Processing on the Microstructure and Mechanical Properties of High strength Aluminum Alloys written by T. H. Sanders and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-04-25 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference provides thorough and in-depth coverage of the latest production and processing technologies encountered in the aluminum alloy industry, discussing current analytical methods for aluminum alloy characterization as well as extractive metallurgy, smelting, master alloy formation, and recycling. The Handbook of Aluminum: Volume 2 examin
Download or read book Thermomechanical Processing of Aluminum Alloys written by James G. Morris and published by . This book was released on 1979 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Influence of Processing Variables and Aluminum Content on the Microstructure and Mechanical Properties of Cast Mg Al Alloys written by Blair Edward Carlson and published by . This book was released on 1997 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials
Download or read book The Effect of Processing and Microstructure on the Mechanical Properties of Aluminium Alloy 339 T5 written by Paul Noles Crepeau and published by . This book was released on 1989 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.
Download or read book The Effects of Microstructural Features on the Response of Aluminum Alloys to Cyclic Deformation written by Edgar A Starke (Jr) and published by . This book was released on 1978 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This program has been designed to isolate and determine the various parameters which control the mechanical behavior during monotonic and cyclic loading of alloys containing various microstructural features developed during the decomposition of 7XXX type aluminum alloys. In addition, limited studies of the stress-corrosion resistance and corrosion-fatigue resistance has been made. The primary goal has been to understand the fundamentals of the deformation processes involved in monotonic and cyclic loading. The results obtained from this study should lead to improvements in the properties of existing alloy systems through control of the microstructure and suggest ways of developing fatigue resistant age-hardenable aluminum alloys. (Author).
Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts
Download or read book State of the Art and Future Trends in Material Modeling written by Holm Altenbach and published by Springer Nature. This book was released on 2019-10-23 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special anniversary book celebrates the success of this Springer book series highlighting materials modeling as the key to developing new engineering products and applications. In this 100th volume of “Advanced Structured Materials”, international experts showcase the current state of the art and future trends in materials modeling, which is essential in order to fulfill the demanding requirements of next-generation engineering tasks.
Download or read book Surface Modification of Metals and Alloys written by Oriol Rius-Ayra and published by MDPI. This book was released on 2021-08-31 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past four decades, there has been increased attention given to the research of fluid mechanics due to its wide application in industry and phycology. Major advances in the modeling of key topics such Newtonian and non-Newtonian fluids and thin film flows have been made and finally published in the Special Issue of coatings. This is an attempt to edit the Special Issue into a book. Although this book is not a formal textbook, it will definitely be useful for university teachers, research students, industrial researchers and in overcoming the difficulties occurring in the said topic, while dealing with the nonlinear governing equations. For such types of equations, it is often more difficult to find an analytical solution or even a numerical one. This book has successfully handled this challenging job with the latest techniques. In addition, the findings of the simulation are logically realistic and meet the standard of sufficient scientific value.
