Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.

Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Superplastic Forming of Advanced Metallic Materials written by G Giuliano and published by Elsevier. This book was released on 2011-06-27 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra fine-grained metals can show exceptional ductility, known as superplasticity, during sheet forming. The higher ductility of superplastic metals makes it possible to form large and complex components in a single operation without joints or rivets. The result is less waste, lower weight and manufacturing costs, high precision and lack of residual stress associated with welding which makes components ideal for aerospace, automotive and other applications. Superplastic forming of advanced metallic materials summarises key recent research on this important process.Part one reviews types of superplastic metals, standards for superplastic forming, processes and equipment. Part two discusses ways of modelling superplastic forming processes whilst the final part of the book considers applications, including superplastic forming of titanium, aluminium and magnesium alloys.With its distinguished editor and international team of contributors, Superplastic forming of advanced metallic materials is a valuable reference for metallurgists and engineers in such sectors as aerospace and automotive engineering.Note: The Publishers wish to point out an error in the authorship of Chapter 3 which was originally listed as: G. Bernhart, Clément Ader Institute, France. The correct authorship is: G Bernhart, P. Lours, T. Cutard, V. Velay, Ecole des Mines Albi, France and F. Nazaret, Aurock, France. The Publishers apologise to the authors for this error. - Reviews types of superplastic metals and standards for superplastic forming - Discusses the modelling of superplastic forming, including mathematical and finite element modelling - Examines various applications, including superplastic forming of titanium, aluminiun and magnesium alloys

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Paper written by and published by . This book was released on 1987 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.

Download or read book Superplasticity in Advanced Materials written by José María Cabrera Marrero and published by Materials Research Forum LLC. This book was released on 2023-09-01 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents practical and theoretical works on superplasticity in metals and ceramics, on deformation mechanisms, on processes to obtain large ultrafine-grained structures, on advanced characterization techniques, and on hot deformation of advanced materials. Key papers focus on (1) processing of metallic alloys for achieving exceptional superplastic properties, (2) high-pressure sliding (HPS) processes, (3) in-situ neutron and synchrotron methods, and (4) ultra-severe plastic deformation. Keywords: Superplasticity, Superfunctionality, High-pressure Sliding, High-pressure Torsion, Precise Forming, Numerical Simulation, Aeronautical Parts, Near-unconstrained Superplastic Parts, Low-temperature Superplasticity, Friction Stir Processing, Microstructure Evolution, Corrosion Properties, Duplex Stainless Steel, Grain Boundary Sliding, Laminated Materials, Asymmetric Hot Rolling, Uniaxial Hot Pressing, Diffusion Bonding.

Download or read book Bulk Metallic Glasses written by C. Suryanarayana and published by CRC Press. This book was released on 2017-11-22 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the fast pace of research in the field, the Second Edition of Bulk Metallic Glasses has been thoroughly updated and remains essential reading on the subject. It incorporates major advances in glass forming ability, corrosion behavior, and mechanical properties. Several of the newly proposed criteria to predict the glass-forming ability of alloys have been discussed. All other areas covered in this book have been updated, with special emphasis on topics where significant advances have occurred. These include processing of hierarchical surface structures and synthesis of nanophase composites using the chemical behavior of bulk metallic glasses and the development of novel bulk metallic glasses with high-strength and high-ductility and superelastic behavior. New topics such as high-entropy bulk metallic glasses, nanoporous alloys, novel nanocrystalline alloys, and soft magnetic glassy alloys with high saturation magnetization have also been discussed. Novel applications, such as metallic glassy screw bolts, surface coatings, hyperthermia glasses, ultra-thin mirrors and pressure sensors, mobile phone casing, and degradable biomedical materials, are described. Authored by the world’s foremost experts on bulk metallic glasses, this new edition endures as an indispensable reference and continues to be a one-stop resource on all aspects of bulk metallic glasses.

Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.

Download or read book Superplastic Forming Diffusion Bonding Technology of Titanium Alloys written by Zhiqiang Li and published by Springer Nature. This book was released on 2023-10-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive illustration to the superplastic forming/diffusion bonding (SPF/DB) technology developed over decades of research on titanium alloys, process modeling, and its application. SPF/DB technology plays key roles in building aviation components with complicated structures, with highly beneficial effects when well designed. With the ever-increasing demand on components with multiple layers, there is an urgent need for an updated assessment of traditional and modern SPF/DB processing methods. Success critically depends on making the most practical and effective choice of SPF/DB method for a given application. The book introduces titanium and titanium alloys, SPF/DB processing and its modeling, and applications for building typical single or multiple layer(s) structures. Particular attention is paid to illustrating the microstructure evolution during SPF/DB processes. The information for making technical decisions about optimal choice of measurement and evaluation methods is also given in the book. Each chapter follows a focused and pragmatic format. Fully illustrated throughout, the book presents the state of the art in SPF/DB technology in a manner that makes it useful for engineers to improve the established forming processes and quality of components. This book is an essential reading material for industrial practitioners, academic researchers and postgraduates.

Download or read book Rolling of Advanced High Strength Steels written by Jingwei Zhao and published by CRC Press. This book was released on 2017-07-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced high strength steels (AHSSs) for auto-making are primarily produced by rolling, plus heat treatment technologies if necessary. However, due to the metallurgical complexity of AHSSs, it is impossible to roll all of the AHSS grades in a rolling mill with the same rolling technology. Each of AHSSs has unique applications in vehicles, and specified rolling technologies are required to produce high quality AHSS products where they might be the best employed to meet performance demands of the automotive parts. Such background has prompted the publication of this scholarly book in the area of rolling of AHSSs with a purpose of providing readers with a valuable technical document that can be used in the research and development of AHSSs for automotive and other manufacturing industries. With contributors from USA, Germany, Poland, Italy, Spain, Austria, Australia, China, India and Iran, the book highlights the latest advances in rolling technologies of AHSSs. It focuses on the theory, simulation and practice of the rolling of AHSSs: The book introduces the history, types and advances of AHSSs and their processes; proposes new theory that is applicable to the rolling of AHSSs, presents mathematical and numerical modelling of AHSSs in rolling; covers thermomechanical processing technologies of AHSSs; provides case studies on the rolling practice of the most popular AHSSs and includes other rolling-related technologies of AHSSs. The book will be useful for both theoretical and applied research aimed at AHSSs rolling technologies, and will be a scientific and valuable literature for the metallurgists, engineers, materials scientists, academics and graduate students who are studying and working with AHSSs and their rolling technologies worldwide.

Download or read book Proceedings of ICF International Symposium on Fracture Mechanics Beijing written by and published by VSP. This book was released on 1983-12 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 132 selected papers presented at the Symposium which will be held on November 22-25, 1983 in Beijing and is the first of international symposia on fracture mechanics held in China. In this volume one may find the contributions of many internationally well known scientists and engineers is the field of fracture mechanics. Among the 132 papers from 12 countries and regions, 16 are invited lectures which were specially chosen to cover major trends in fracture mechanics and were prepared by specialists actively engaged on the respective subjects. All papers are grouped under the 6 headings, that is, 1. Elastic and elastic-plastic fracture mechanics; 2. Applications of fracture mechanics; 3. Test methods; 4. Fatigue; 5. Fracture models and micro-mechanisms and 6. Fracture of non-metals. 70 papers are from Chinese contributors. It is the first time that Chinese scientists and engineers working on this field presented their studies to the outside world in such a large number and wide range of topics. Anyone interested in fracture mechanics may find in this volume the recent advances in this field. Anyone interested in the development in China may find in this volume the state of the art of fracture mechanics studies in China. This proceedings may serve also as a reference book for engineers, applied mathematicians, metallurgists, physicists and other scientists, as well as graduate students and undergraduate students. There are approximately 1,100 pages.

Download or read book Superplasticity in Metals and Ceramics written by T. G. Nieh and published by Cambridge University Press. This book was released on 1997-01-23 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: A materials engineering monograph in the Cambridge Solid State Science Series, first published in 1997.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1973 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Reference Publication written by and published by . This book was released on 1977 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Materials Processing IX written by Jun Wang and published by Trans Tech Publications Ltd. This book was released on 2010-06-02 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 9th Asia-Pacific Conference on Materials Processing (APCMP 2010), 7-10 June 2010, Sydney, Australia