Download or read book Thermal Cracking in Concrete at Early Ages written by R. Springenschmid and published by CRC Press. This book was released on 1994-10-13 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Restraint and intrinsic stresses in concrete at early ages are vitally important for concrete structures which must remain free of water-permeable cracks, such as water-retaining structures, tunnel linings, locks and dams. The development of hydration heat, stiffness and strength, also the degree of restraint and, especially for high-strength concrete, non-thermal effects, are decisive for sensitivity to cracking. Determining thses stresses in the laboratory and in construction components has led to a clearer understanding of how they develop and how to optimize mix design, temperature and curing conditions. New testing equipment has enabled the effects of all the important parameters to be qualified and more reliable models for predictiong restraint stresses to be developed. Thermal Cracking in Conrete at Early Ages contains 56 contributions by leading international specialists presented at the RILEM Symposium held in October 1994 at the Technical University of Munich. It will be valuable for construction and site engineers, concrete technologists and scientists.

Download or read book Early age Cracking Control on Modern Concrete written by Dejian Shen and published by Springer Nature. This book was released on with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book PRO 23 International RILEM Conference on Early Age Cracking in Cementitious Systems EAC 01 written by Arnon Bentur and published by RILEM Publications. This book was released on 2002 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cracking Control on Early Age Concrete Through Internal Curing written by Dejian Shen and published by Springer Nature. This book was released on 2023-07-10 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is written based on the author's research on the assessment, control, and repair of cracking of early-age concrete in the recent decade. The technique of internal curing for increasing cracking resistance of early-age concrete is further developed through experimental and theoretical research. It establishes models for predicting the internal relative humidity and autogenous shrinkage of internally cured concrete at early age; reveals the variation law and mechanism of early-age tensile creep of internally cured concrete; and explores the variation law and mechanism of early-age cracking resistance of internally cured concrete under continuous restrained condition or uniaxial restrained condition. It is designed as a reference work for professionals or practitioners and a textbook for undergraduates or postgraduates. As such, this book provides valuable knowledge, useful methods, and practical experience that can be considered in the field of concrete cracking control.

Download or read book Early Age Autogenous Shrinkage of Concrete written by Erika E. Holt and published by . This book was released on 2001 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Cracking of Massive Concrete Structures written by Eduardo M.R. Fairbairn and published by Springer. This book was released on 2018-05-23 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a State of the Art Report (STAR) produced by RILEM Technical Committee 254-CMS ‘Thermal Cracking of Mas-sive Concrete Structures’. Several recent developments related to the old problem of understanding/predicting stresses originated from the evolution of the hydration of concrete are at the origin of the creation this technical committee. Having identified a lack in the organization of up-to-date scientific and technological knowledge about cracking induced by hydration heat effects, this STAR aims to provide both practitioners and scientists with a deep integrated overview of consolidated knowledge, together with recent developments on this subject.

Download or read book Designing and Building with UHPFRC written by Jacques Resplendino and published by John Wiley & Sons. This book was released on 2013-01-29 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the international workshop “Designing and Building with Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC): State of the Art and Development”, organized by AFGC, the French Association for Civil Engineering and French branch of fib, in Marseille (France), November 17-18, 2009. This workshop was focused on the experience of a lot of recent UHPFRC realizations. Through more than 50 papers, this book details the experience of many countries in UHPFRC construction and design, including projects from Japan, Germany, Australia, Austria, USA, Denmark, the Netherlands, Canada... and France. The projects are categorized as novel architectural solutions, new frontiers for bridges, new equipments and structural components, and extending the service life of structures. The last part presents major research results, durability and sustainability aspects, and the updated AFGC Recommendations on UHPFRC.

Download or read book Thermal Stresses and Temperature Control of Mass Concrete written by Zhu Bofang and published by Butterworth-Heinemann. This book was released on 2013-12-11 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of controlling mass concrete temperatures range from relatively simple to complex and from inexpensive too costly. Depending on a particular situation, it may be advantageous to use one or more methods over others. Based on the author's 50 years of personal experience in designing mass concrete structures, Thermal Stresses and Temperature Control of Mass Concrete provides a clear and rigorous guide to selecting the right techniques to meet project-specific and financial needs. New techniques such as long time superficial thermal insulation, comprehensive temperature control, and MgO self-expansive concrete are introduced. - Methods for calculating the temperature field and thermal stresses in dams, docks, tunnels, and concrete blocks and beams on elastic foundations - Thermal stress computations that take into account the influences of all factors and simulate the process of construction - Analytical methods for determining thermal and mechanical properties of concrete - Formulas for determining water temperature in reservoirs and temperature loading of arched dams - New numerical monitoring methods for mass and semi-mature aged concrete

Download or read book Corrosion of Steel in Concrete Structures written by Amir Poursaee and published by Woodhead Publishing. This book was released on 2023-02-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. - Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete - Introduces the latest measuring methods, data collection, and advanced modeling techniques - Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices

Download or read book Nondestructive Testing of Materials and Structures written by Oral Büyüköztürk and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition assessment and characterization of materials and structures by means of nondestructive testing (NDT) methods is a priority need around the world to meet the challenges associated with the durability, maintenance, rehabilitation, retrofitting, renewal and health monitoring of new and existing infrastructures including historic monuments. Numerous NDT methods that make use of certain components of the electromagnetic and acoustic spectrum are currently in use to this effect with various levels of success and there is an intensive worldwide research effort aimed at improving the existing methods and developing new ones. The knowledge and information compiled in this book captures the current state of the art in NDT methods and their application to civil and other engineering materials and structures. Critical reviews and advanced interdisciplinary discussions by world-renowned researchers point to the capabilities and limitations of the currently used NDT methods and shed light on current and future research directions to overcome the challenges in their development and practical use. In this respect, the contents of this book will equally benefit practicing engineers and researchers who take part in characterization, assessment and health monitoring of materials and structures.

Download or read book Ultra High Performance Concrete UHPC written by Ekkehard Fehling and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since. Ultra high performance concrete (UHPC) is a milestone in concrete technology and application. It permits the construction of both more slender and more durable concrete structures with a prolonged service life and thus improved sustainability. This book is a comprehensive overview of UHPC - from the principles behind its production and its mechanical properties to design and detailing aspects. The focus is on the material behaviour of steel fibre-reinforced UHPC. Numerical modelling and detailing of the connections with reinforced concrete elements are featured as well. Numerous examples worldwide - bridges, columns, facades and roofs - are the basis for additional explanations about the benefits of UHPC and how it helps to realise several architectural requirements. The authors are extensively involved in the testing, design, construction and monitoring of UHPC structures. What they provide here is therefore a unique synopsis of the state of the art with a view to practical applications.

Download or read book Early age Thermal Crack Control in Concrete written by P. B. Bamforth and published by . This book was released on 2007 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide provides a method for estimating the magnitude of crack inducing strain and the risk of cracking; and where cracking will occur guidance is provided on the design of reinforcement to control crack widths.

Download or read book 1st fib Congress in Osaka Japan Vol2 written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2002-01-01 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bonded Cement Based Material Overlays for the Repair the Lining or the Strengthening of Slabs or Pavements written by Benoît Bissonnette and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among different approaches that can be considered for concrete rehabilitation, bonded overlays are often the most economical alternative. The primary purpose of overlays is to extend the life of the candidate structures, either by restoring the quality and integrity of the surface and/or the re-establishing or improving the load-carrying capacity. Nevertheless, the durability of bonded overlay systems still draws concerns in the technical community because of bond sustainability problems encountered in a number of cases. At this time, there is still no accepted design approach or methodology that can warrant the practitioner a successful outcome of the repair. This State-of-Art report summarizes the findings with respect to all aspects involved in the overlaying process.

Download or read book Report 25 Early Age Cracking in Cementitious Systems Report of RILEM Technical committee TC 181 EAS Early age cracking shrinkage induced stresses and cracking in cementitious systems written by Arnon Bentur and published by RILEM Publications. This book was released on 2003 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 7th RILEM International Conference on Cracking in Pavements written by A. Scarpas and published by Springer Science & Business Media. This book was released on 2012-08-30 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the recent past, new materials, laboratory and in-situ testing methods and construction techniques have been introduced. In addition, modern computational techniques such as the finite element method enable the utilization of sophisticated constitutive models for realistic model-based predictions of the response of pavements. The 7th RILEM International Conference on Cracking of Pavements provided an international forum for the exchange of ideas, information and knowledge amongst experts involved in computational analysis, material production, experimental characterization, design and construction of pavements. All submitted contributions were subjected to an exhaustive refereed peer review procedure by the Scientific Committee, the Editors and a large group of international experts in the topic. On the basis of their recommendations, 129 contributions which best suited the goals and the objectives of the Conference were chosen for presentation and inclusion in the Proceedings. The strong message that emanates from the accepted contributions is that, by accounting for the idiosyncrasies of the response of pavement engineering materials, modern sophisticated constitutive models in combination with new experimental material characterization and construction techniques provide a powerful arsenal for understanding and designing against the mechanisms and the processes causing cracking and pavement response deterioration. As such they enable the adoption of truly "mechanistic" design methodologies. The papers represent the following topics: Laboratory evaluation of asphalt concrete cracking potential; Pavement cracking detection; Field investigation of pavement cracking; Pavement cracking modeling response, crack analysis and damage prediction; Performance of concrete pavements and white toppings; Fatigue cracking and damage characterization of asphalt concrete; Evaluation of the effectiveness of asphalt concrete modification; Crack growth parameters and mechanisms; Evaluation, quantification and modeling of asphalt healing properties; Reinforcement and interlayer systems for crack mitigation; Thermal and low temperature cracking of pavements; and Cracking propensity of WMA and recycled asphalts.

Download or read book Proceedings of the 7th Brazilian Technology Symposium BTSym 21 written by Yuzo Iano and published by Springer Nature. This book was released on 2022-07-20 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the Proceedings of The 7th Brazilian Technology Symposium (BTSym'21). The book discusses current technological issues on Systems Engineering, Mathematics and Physical Sciences, such as the Transmission Line, Protein-modified mortars, Electromagnetic Properties, Clock Domains, Chebyshev Polynomials, Satellite Control Systems, Hough Transform, Watershed Transform, Blood Smear Images, Toxoplasma Gondi, Operation System Developments, MIMO Systems, Geothermal-Photovoltaic Energy Systems, Mineral Flotation Application, CMOS Techniques, Frameworks Developments, Physiological Parameters Applications, Brain Computer Interface, Artificial Neural Networks, Computational Vision, Security Applications, FPGA Applications, IoT, Residential Automation, Data Acquisition, Industry 4.0, Cyber-Physical Systems, Digital Image Processing, Patters Recognition, Machine Learning, Photocatalytic Process, Physical-chemical analysis, Smoothing Filters, Frequency Synthesizers, Voltage Controlled Ring Oscillator, Difference Amplifier, Photocatalysis, Photodegradation, current technological issues on Human, Smart and Sustainable Future of Cities, such as the Digital Transformation, Data Science, Hydrothermal Dispatch, Project Knowledge Transfer, Immunization Programs, Efficiency and Predictive Methods, PMBOK Applications, Logistics Process, IoT, Data Acquisition, Industry 4.0, Cyber-Physical Systems, Fingerspelling Recognition, Cognitive Ergonomics, Ecosystem services, Environmental, Ecosystem services valuation, Solid Waste and University Extension.