Download or read book Insect Resistance Management written by David W. Onstad and published by Academic Press. This book was released on 2013-10-08 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neither pest management nor resistance management can occur with only an understanding of pest biology. For years, entomologists have understood, with their use of economic thresholds, that at least a minimal use of economics was necessary for proper integrated pest management. IRM is even more complicated and dependent on understanding and using socioeconomic factors. The new edition of Insect Resistance Management addresses these issues and much more. Many new ideas, facts and case studies have been developed since the previous edition of Insect Resistance Management published. With a new chapter focusing on Resistance Mechanisms Related to Plant-incorporated Toxins and heavily expanded revisions of several existing chapters, this new volume will be an invaluable resource for IRM researchers, practitioners, professors and advanced students. Authors in this edition include professors at major universities, leaders in the chemical and seed industry, evolutionary biologists and active IRM practitioners. This revision also contains more information about IRM outside North America, and a modeling chapter contains a large new section on uncertainty analysis, a subject recently emphasized by the U.S. Environmental Protection Agency. The final chapter contains a section on insecticidal seed treatments. No other book has the breadth of coverage of Insect Resistance Management, 2e. It not only covers molecular to economic issues, but also transgenic crops, seed treatments and other pest management tactics such as crop rotation. Major themes continuing from the first edition include the importance of using IRM in the integrated pest management paradigm, the need to study and account for pest behavior, and the influence of human behavior and decision making in IRM. - Provides insights from the history of insect resistance management (IRM) to the latest science - Includes contributions from experts on ecological aspects of IRM, molecular and population genetics, economics, and IRM social issues - Offers biochemistry and molecular genetics of insecticides presented with an emphasis on recent research - Encourages scientists and stakeholders to implement and coordinate strategies based on local social conditions

Download or read book GMOs written by Anurag Chaurasia and published by Springer Nature. This book was released on 2020-11-30 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad spectrum of topics related to GMOs and allied new gene-based technologies, biodiversity, and ecosystem processes, bringing together the contributions of researchers and regulators from around the world. The aim is to offer a clear view of the benefits and effects of genetically modified crops, insects, and other animals on the soil microbiome and ecological processes. Contributors examine issues related to the development of risk assessment procedures and regulations designed to maximize benefits while minimizing risks. Beyond the scientific challenges of GMOs, the book explores the broad and contentious terrain of ethical considerations. The contributors discuss such questions as the unintended, possibly unforeseen, consequences of releasing GMOs into ecosystems, and the likelihood that the full effects of GMOs could take years, even decades, of close monitoring to become evident. The importance of developing a precautionary approach is stressed. The final chapter describes the critical issues of governance and regulation of new and emerging gene-based technologies, as nations grapple with the consequences of adopting the Cartagena Protocol on Biosafety (CPB). The volume includes an extensive Annex which outlines legal perspectives on the state of GMO governance around the world, with more than 20 examples from nations in Africa, South and Central America, Asia, Australasia, and Europe.

Download or read book Genetically Engineered Crops written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2017-01-28 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Genetically engineered (GE) crops were first introduced commercially in the 1990s. After two decades of production, some groups and individuals remain critical of the technology based on their concerns about possible adverse effects on human health, the environment, and ethical considerations. At the same time, others are concerned that the technology is not reaching its potential to improve human health and the environment because of stringent regulations and reduced public funding to develop products offering more benefits to society. While the debate about these and other questions related to the genetic engineering techniques of the first 20 years goes on, emerging genetic-engineering technologies are adding new complexities to the conversation. Genetically Engineered Crops builds on previous related Academies reports published between 1987 and 2010 by undertaking a retrospective examination of the purported positive and adverse effects of GE crops and to anticipate what emerging genetic-engineering technologies hold for the future. This report indicates where there are uncertainties about the economic, agronomic, health, safety, or other impacts of GE crops and food, and makes recommendations to fill gaps in safety assessments, increase regulatory clarity, and improve innovations in and access to GE technology.

Download or read book Integration of Insect Resistant Genetically Modified Crops within IPM Programs written by Jörg Romeis and published by Springer Science & Business Media. This book was released on 2008-07-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Insect pests remain one of the main constraints to food and fiber production worldwide despite farmers deploying a range of techniques to protect their crops. Modern pest control is guided by the principles of integrated pest management (IPM) with pest resistant germplasm being an important part of the foundation. Since 1996, when the first genetically modified (GM) insect-resistant maize variety was commercialized in the USA, the area planted to insect-resistant GM varieties has grown dramatically, representing the fastest adoption rate of any agricultural technology in human history. The goal of our book is to provide an overview on the role insect-resistant GM plants play in different crop systems worldwide. We hope that the book will contribute to a more rational debate about the role GM crops can play in IPM for food and fiber production.

Download or read book The Pink Bollworm written by Walter David Hunter and published by . This book was released on 1914 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Insect Viruses written by Byrony C Bonning and published by Academic Press. This book was released on 2006-09-22 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Baculoviruses are perhaps unique among viruses in the breadth of their biotechnological applications: these insect specific viruses are used not only for insect pest management purposes, but also as laboratory research tools for production of recombinant proteins and for protein display, and as potential vectors for human gene therapy. In addition to highlighting recent advances, this volume provides a comprehensive review of the biotechnological applications of these and other insect viruses in both the academic and private sectors.

Download or read book An Ecological Risk Assessment of Bt Transgenic Sweet Corn on Non target Arthropod Communities written by Robyn Ilene Rose and published by . This book was released on 2005 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Western Corn Rootworm written by Francis Marion Webster and published by . This book was released on 1913 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Southern Corn Rootworm written by and published by . This book was released on 1961 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Genetically Modified Plants written by Roger Hull and published by Academic Press. This book was released on 2009-07-07 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: A transgenic organism is a plant, animal, bacterium, or other living organism that has had a foreign gene added to it by means of genetic engineering. Transgenic plants can arise by natural movement of genes between species, by cross-pollination based hybridization between different plant species (which is a common event in flowering plant evolution), or by laboratory manipulations by artificial insertion of genes from another species. Methods used in traditional breeding that generate transgenic plants by non-recombinant methods are widely familiar to professional plant scientists, and serve important roles in securing a sustainable future for agriculture by protecting crops from pest and helping land and water to be used more efficiently.There is worldwide interest in the biosafety issues related to transgenic crops because of issues such as increased pesticide use, increased crop and weed resistance to pesticides, gene flow to related plant species, negative effects on nontarget organisms, and reduced crop and ecosystem diversity. This book is intended to provide the basic information for a wide range of people involved in the release of transgenic crops. These will include scientists and researchers in the initial stage of developing transgenic products, industrialists, and decision makers. It will be of particular interest to plant scientists taking up biotechnological approaches to agricultural improvement for developing nations. - Discusses traditional and future technology for genetic modification - Compares conventional non-GM approaches and genetic modification - Presents a risk assessment methodology for GM techniques - Details mitigation techniques for human and environmental effects

Download or read book Interactions of Plant Resistance and Parasitoids and Predators of Insects written by David J. Boethel and published by . This book was released on 1986 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Colorado Potato Beetle Leptinotarsa Decemlineata Say written by Frank Hurlbut Chittenden and published by . This book was released on 1907 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biodiversity written by David L. Hawksworth and published by Springer Science & Business Media. This book was released on 1995-11-30 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading experts on the field of biodiversity examine examples from a wide range of organism groups. Their approaches include the latest molecular and phylogenetic techniques through to the selection of indicator data and aspects of sampling. This paperback edition has been published for students on 'biodiversity' related courses.

Download or read book Glyphosate Resistance in Crops and Weeds written by Vijay K. Nandula and published by John Wiley & Sons. This book was released on 2010-12-28 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies are becoming available for managing glyphosate resistant (GR) weeds and reducing their spread. GR crop technology has revolutionized crop production in the developed world and the benefits are gradually spilling over to the developing world. In order to sustain an effective, environmentally safe herbicide such as glyphosate and the GR crop technology well in to the future, it is imperative that the issue of GR weeds be comprehensively understood. This book provides such an essential, up-to-date source of information on glyphosate resistance for researchers, extension workers, land managers, government personnel, and other decision makers. Provides comprehensive coverage of the intensely studied topic of glyphosate resistant (GR) in crops Details the development of glyphosate resistance and how to detect and manage the problem in crops Helps standardize global approaches to glyphosate resistance Encompasses interdisciplinary approaches in chemistry, weed science, biochemistry, plant physiology, plant biotechnology, genetics, ecology Includes a chapter on economic analysis of GR impact on crops

Download or read book Rediscovery of Landraces as a Resource for the Future written by Oscar Grillo and published by BoD – Books on Demand. This book was released on 2018-09-12 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, all over the world, the attention paid to local and traditional productions is growing, especially in the agro-food sector. Maybe, it is not only due to the impact of globalization and the social and economic changes but also due to the increased consideration to health and nutritional aspects of food. Hence, for economic, social, historical, and nutritional reasons, this trend has led to the rediscovery and reuse of landraces of many different crops, responding to requests for more and more demanding market. This volume collects examples of local crops and old landraces of different areas of the planet that testify the extreme importance of the relation existing among a land, the local productions, the historical traditions, the conservation of biodiversity, the health benefits, the environmental impact and the local economies, also including the significance to dedicate resources to scientific researches in local crops.

Download or read book Biotechnology and Plant Breeding written by Aluízio Borém and published by Elsevier. This book was released on 2014-01-21 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biotechnology and Plant Breeding includes critical discussions of the newest and most important applications of biotechnology in plant breeding, covering key topics such as biometry applied to molecular analysis of genetic diversity, genetically modified plants, and more. This work goes beyond recombinant DNA technology to bring together key information and references on new biotech tools for cultivar development, such as double-haploids, molecular markers, and genome-wide selection, among others. It is increasingly challenging for plant breeders and agricultural systems to supply enough food, feed, fiber and biofuel for the global population. As plant breeding evolves and becomes increasingly sophisticated, a staggering volume of genetic data is now generated. Biotechnology and Plant Breeding helps researchers and students become familiar with how the vast amounts of genetic data are generated, stored, analyzed and applied. This practical resource integrates information about plant breeding into the context of modern science, and assists with training for plant breeders including those scientists who have a good understanding of molecular biology/biotechnology and need to learn the art and practice of plant breeding. Plant biologists, breeding technicians, agronomists, seed technologists, students, and any researcher interested in biotechnologies applied to plant breeding will find this work an essential tool and reference for the field. - Presents in-depth but easy-to-understand coverage of topics, so plant breeders can readily comprehend them and apply them to their breeding programs - Includes chapters that address the already developed and optimized biotechnologies for cultivar development, with real-world application for users - Features contributions by authors with several years of experience in their areas of expertise

Download or read book Plant Genetic Engineering written by A.D. Arencibia and published by Elsevier. This book was released on 2000-02-14 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant biotechnology offers important opportunities for agriculture, horticulture, and the pharmaceutical and food industry by generating transgenic varieties with altered properties. This is likely to change farming practice and reduce the potential negative impact of plant production on the environment. This volume shows the worldwide advances and potential benefits of plant genetic engineering focusing on the third millennium. The authors discuss the production of transgenic plants resistant to biotic and abiotic stress, the improvement of plant qualities, the use of transgenic plants as bioreactors, and the use of plant genomics for genetic improvement and gene cloning. Unique to this book is the integrative point of view taken between plant genetic engineering and socioeconomic and environmental issues. Considerations of regulatory processes to release genetically modified plants, as well as the public acceptance of the transgenic plants are also discussed.This book will be welcomed by biotechnologists, researchers and students alike working in the biological sciences. It should also prove useful to everyone dedicated to the study of the socioeconomic and environmental impact of the new technologies, while providing recent scientific information on the progress and perspectives of the production of genetically modified plants.The work is dedicated to Professor Marc van Montagu.