Download or read book Effect of Microstructure Transformations on Fatigue Properties of Laser Beam Welded Ti 6Al 4V Butt Joints Subjected to Postweld Heat Treatment written by Fedor Fomin and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of postweld heat treatment (PWHT) on 2.6-mm-thick Ti-6Al-4V butt joints that were welded using a continuous-wave 8-kW ytterbium fibre laser was studied in terms of the microstructure, microtexture, number of welding defects, microhardness, residual stress distribution and high cycle fatigue (HCF) properties. Five types of heat treatments in the temperature range of 540-920°C are investigated. The main reasons leading to fatigue life deterioration after the laser welding process are discussed, and possible guidelines for further improvement of the HCF behaviour by a subsequent suitable type of PWHT are provided. Low-temperature annealing (T 600°C) tends to harden both the base material and the welding zone without any significant effect on the fatigue properties. Heat treatments at higher temperatures (T 750°C) lead to the transformation of a strong martensitic structure in the fusion zone (FZ) into more ductile coarse lamellar, which is more beneficial for fatigue performance. A suitable type of PWHT can increase the fatigue limit of a laser-welded Ti-6Al-4V butt joint by 10%; however, a slight decrease in static strength should be considered. The effect of stress relief at elevated temperatures is studied.
Download or read book Study of Grain Boundary Character written by Tomasz Tański and published by BoD – Books on Demand. This book was released on 2017-01-11 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters with original and innovative research studies in the field of grain boundaries. The results presented in the chapters of this book are very interesting and inspiring. This book will be very valuable to all researchers who are interested in the influence of grain boundaries on the structure and different kinds of properties of engineering materials. This book is also addressed to students and professional engineers working in the industry as well as to specialists who pay attention to all aspects related to grain boundaries and their impact on the various properties of innovative materials. The chapters of this book were developed by respected and well-known researchers from different countries.
Download or read book Metals Abstracts written by and published by . This book was released on 1998-04 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Microstructure on the Fatigue Properties of Ti 6Al 4V Bar written by LJ. Bartlo and published by . This book was released on 1969 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure can have a significant effect on the mechanical properties of titanium alloys. The extent of this effect on the fatigue properties of the Ti-6Al-4V alloy in small diameter bar (0.625 in., 15.875 mm) was studied. Microstructural variations were produced by heat treating from 1550 to 1950 F at 100 F intervals. Three different cooling rates (furnace cooling, air cooling, and water quenching) were employed for each temperature. The room-temperature tensile, smooth, and notch-fatigue properties were evaluated for each thermal condition.
Download or read book Advanced Joining Processes written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2020-03-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.
Download or read book The effect of post welded heat treatment on mechanical properties and microstructure of friction stir welded Al 6063 written by Jasveer Singh and published by BookRix. This book was released on 2018-01-11 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is the third most abundant element (after oxygen and silicon), and the most abundant metal in the Earth's crust. Aluminium is remarkable for the metal's low density and for its ability to resist corrosion due to the phenomenon of passivation. Structural components made from aluminium and its alloys are vital to the aerospace industry and are important in other areas of transportation and structural materials Welding plays a crucial role or say as a back bone of manufacturing industry to join the components. Friction stir welding (FSW) is a relatively new joining process that has been demonstrated in a variety of metals such as steel, titanium, lead, copper and aluminium. The unique properties of friction stir welds make possible some completely new structural designs with significant impact to ship design and construction. Friction stir welding is especially advantageous for joining aluminium and has been exploited commercially around the world in several industries. In the present work the effects of welding speed have been investigated on the microstructural and mechanical properties of friction stir welded aluminium alloy 6063. FSW was carried out at rotational speed of 1300 rpm (constant) and transverse speeds of 35, 50 and 65 mm/min. Mechanical performance has been investigated in terms of hardness, wear resistance and tensile strength. To study the effect of post welding heat treatment on properties of friction stir welded joint, the artificial ageing was carried out at 1600 C for a soaking period of 20 hours in the muffle furnace. The study revealed that friction stir welded joint prepared at welding speed of 35 mm/min exhibited better tensile strength, hardness and wear resistance. Better mechanical properties of the joint prepared at welding speed of 35 mm/min may be attributed due to fine, homogeneous and equaxed grain structure of stir zone. Post welding heat treatment of friction stir welded joint improved the wear resistance and microhardness of the joint. However tensile properties deteriorated with the post welding heat treatment of joint.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book Handbook of Laser Welding Technologies written by S Katayama and published by Elsevier. This book was released on 2013-06-30 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser welding is a rapidly developing and versatile technology which has found increasing applications in industry and manufacturing. It allows the precision welding of small and hard-to-reach areas, and is particularly suitable for operation under computer or robotic control. The Handbook of laser welding technologies reviews the latest developments in the field and how they can be used across a variety of applications.Part one provides an introduction to the fundamentals of laser welding before moving on to explore developments in established technologies including CO2 laser welding, disk laser welding and laser micro welding technology. Part two highlights laser welding technologies for various materials including aluminium and titanium alloys, plastics and glass. Part three focuses on developments in emerging laser welding technologies with chapters on the applications of robotics in laser welding and developments in the modelling and simulation of laser and hybrid laser welding. Finally, part four explores the applications of laser welding in the automotive, railway and shipbuilding industries.The Handbook of laser welding technologies is a technical resource for researchers and engineers using laser welding technologies, professionals requiring an understanding of laser welding techniques and academics interested in the field. - Provides an introduction to the fundamentals of laser welding including characteristics, welding defects and evolution of laser welding - Discusses developments in a number of techniques including disk, conduction and laser micro welding - Focusses on technologies for particular materials such as light metal alloys, plastics and glass
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Phase Transformations written by Srikumar Banerjee and published by Elsevier. This book was released on 2010-05-31 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. - Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability - Drawing upon the background and the research experience of the authors, bringing together a wealth of experience - Written essentially from a physical metallurgists view point
Download or read book Laser Material Processing written by William M. Steen and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: New chapters on bending and cleaning reflect the changes in the field since the last edition, completing the range of practical knowledge about the processes possible with lasers already familiar to users of this well-known text. Professor Steen's lively presentation is supported by a number of original cartoons by Patrick Wright and Noel Ford, which will bring a smile to your face and ease the learning process. From the reviews: "...well organized, and the text is very practical...The engineering community will find this book informative and useful." (OPTICS AND PHOTONICS NEWS, July/August 2005)
Download or read book The Effect of Laser Welding Process Parameters on the Mechanical and Microstructural Properties of V 4Cr 4Ti Structural Materials written by and published by . This book was released on 2000 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper reports on a systematic study which was conducted to examine the use of a pulsed Nd:YAG laser to weld sheet materials of V-Cr-Ti alloys and to characterize the microstructural and mechanical properties of the resulting joints. Deep penetration and defect-free welds were achieved under an optimal combination of laser parameters including focal length of lens, pulse energy, pulse repetition rate, beam travel speed, and shielding gas arrangement. The key for defect-free welds was found to be the stabilization of the keyhole and providing an escape path for the gas trapped in the weld. An innovative method was developed to obtain deep penetration and oxygen contamination free welds. Oxygen and nitrogen uptake were reduced to levels only a few ppm higher than the base metal by design and development of an environmental control box. Effort directed at developing an acceptable postwelding heat treatment showed that five passes of a diffuse laser beam over the welded region softened the weld material, especially in the root region of the weld.
Download or read book Analysis of Welded Structures written by Koichi Masubuchi and published by Elsevier. This book was released on 2013-10-22 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Welded Structures: Residual Stresses, Distortion, and their Consequences encompasses several topics related to design and fabrication of welded structures, particularly residual stresses and distortion, as well as their consequences. This book first introduces the subject by presenting the advantages and disadvantages of welded structures, as well as the historical overview of the topic and predicted trends. Then, this text considers residual stresses, heat flow, distortion, fracture toughness, and brittle and fatigue fractures of weldments. This selection concludes by discussing the effects of distortion and residual stresses on buckling strength of welded structures and effects of weld defects on service behavior. This book also provides supplementary discussions on some related and selected subjects. This text will be invaluable to metallurgists, welders, and students of metallurgy and welding.
Download or read book On the Fatigue Behaviour and Modelling of Fatigue Life for Laser welded Ti 6Al 4V written by Fedor Fomin and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This aim of this work is to investigate the fatigue behaviour of laser-welded Ti-6Al-4V titanium alloy in the region of high cycle fatigue. The crack initiation mechanism and the influence of weld defects on fatigue performance were comprehensively studied. A set of post-weld treatments that can mitigate the effect of inherent weld imperfections and thereby extend the fatigue life were analysed. A robust and efficient analytical assessment model for internally-flawed materials has been developed based on a fracture mechanics approach. The developed methodology can be used for the reliability assessment of components with various types of defects, thus enabling a defect-tolerant design of welded structures.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Additively Manufactured Inconel 718 written by Dunyong Deng and published by Linköping University Electronic Press. This book was released on 2018-01-24 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM), also known as 3D printing, has gained significant interest in aerospace, energy, automotive and medical industries due to its capabilities of manufacturing components that are either prohibitively costly or impossible to manufacture by conventional processes. Among the various additive manufacturing processes for metallic components, electron beam melting (EBM) and selective laser melting (SLM) are two of the most widely used powder bed based processes, and have shown great potential for manufacturing high-end critical components, such as turbine blades and customized medical implants. The futures of the EBM and SLM are doubtlessly promising, but to fully realize their potentials there are still many challenges to overcome. Inconel 718 (IN718) is a nickel-base superalloy and has impressive combination of good mechanical properties and low cost. Though IN718 is being mostly used as a turbine disk material now, the initial introduction of IN718 was to overcome the poor weldability of superalloys in 1960s, since sluggish precipitation of strengthening phases ?’/?’’ enables good resistance to strain-age cracking during welding or post weld heat treatment. Given the similarity between AM and welding processes, IN718 has been widely applied to the metallic AM field to facilitate the understandings of process-microstructure-property relationships. The work presented in this licentiate thesis aims to better understand microstructures and mechanical properties EBM and SLM IN718, which have not been systematically investigated. Microstructures of EBM and SLM IN718 have been characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and correlated with the process conditions. Monotonic mechanical properties (e.g., Vickers microhardness and tensile properties) have also been measured and rationalized with regards to the microstructure evolutions before and after heat treatments. For EBM IN718, the results show the microstructure is not homogeneous but dependant on the location in the components, and the anisotropic mechanical properties are probably attributed to alignment of porosities rather than texture. Post heat treatment can slightly increase the mechanical strength compared to the as-manufactured condition but does not alter the anisotropy. SLM IN718 shows significantly different microstructure and mechanical properties to EBM IN718. The as-manufactured SLM IN718 has very fine dendritic microstructure and Laves phases in the interdendrites, and is “work-hardened” by the residual strains and dislocations present in the material. Mechanical properties are different between horizontally and vertically built samples, and heat treatment can minimize this difference. Results from this licentiate thesis provide the basis for the further research on the cyclic mechanical properties of EBM and SLM IN718, which would be the focus of following phase of the Ph.D. research.
