Download or read book Effect of Microstructure on Fatigue Properties of Ti 6Al 4V written by Mohammed Ashraf Imam and published by . This book was released on 1978 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Microstructure on the Fatigue Properties of Ti 6Al 4V Bar written by LJ. Bartlo and published by . This book was released on 1969 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure can have a significant effect on the mechanical properties of titanium alloys. The extent of this effect on the fatigue properties of the Ti-6Al-4V alloy in small diameter bar (0.625 in., 15.875 mm) was studied. Microstructural variations were produced by heat treating from 1550 to 1950 F at 100 F intervals. Three different cooling rates (furnace cooling, air cooling, and water quenching) were employed for each temperature. The room-temperature tensile, smooth, and notch-fatigue properties were evaluated for each thermal condition.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Multiaxial Fatigue written by Darrell Socie and published by SAE International. This book was released on 1999-12-15 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practicing engineers, researchers, and students with a working knowledge of the fatigue design process and models under multiaxial states of stress and strain. Readers are introduced to the important considerations of multiaxial fatigue that differentiate it from uniaxial fatigue.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book The Science Technology and Application of Titanium written by R. I. Jaffee and published by Elsevier. This book was released on 2013-09-24 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science, Technology and Application of Titanium contains the proceedings of an International Conference organized by the Institute of Metals, The Metallurgical Society of AIME, and the American Society for Metals in association with the Japan Institute of Metals and the Academy of Sciences of the USSR and held at the Royal Festival Hall in London, on May 21-24, 1968. The papers explore scientific and technological developments as well as applications of titanium and cover topics ranging from processing of titanium to its chemical and environmental behavior, physics, thermodynamics, and kinetics. Deformation and fracture, phase transformations and heat treatment, and alloying are also discussed. This book is comprised of 114 chapters and begins with an overview of the titanium industry in Europe and the United States. The reader is then introduced to primary and secondary fabrication of titanium; corrosion and oxidation; physical properties of titanium alloys; interaction of titanium with elements of the periodic system; and elastic interactions between dislocations and twin and grain boundaries in titanium. The crystallography of deformation twinning in titanium is also examined, along with superplasticity and transformation plasticity in titanium. The remaining chapters focus on interstitial strengthening of titanium alloys; mechanism of martensitic transformation in titanium and its alloys; phase relationships in titanium-oxygen alloys; strengthening of titanium alloys by shock deformation; and titanium hot forming. This monograph will be of interest to chemists and metallurgists.
Download or read book Additive Friction Stir Deposition written by Hang Z. Yu and published by Elsevier. This book was released on 2022-07-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Friction Stir Deposition is a comprehensive summary of the state-of-the-art understanding on this emerging solid-state additive manufacturing technology. Sections cover additive friction stir deposition, encompassing advances in processing science, metallurgical science and innovative applications. The book presents a clear description of underlying physical phenomena, shows how the process determines the printing quality, covers resultant microstructure and properties in the as-printed state, highlights its key capabilities and limitations, and explores niche applications in repair, cladding and multi-material 3D printing. Serving as an educational and research guide, this book aims to provide a holistic picture of additive friction stir deposition-based solid-state additive manufacturing as well as a thorough comparison to conventional beam-based metal additive manufacturing, such as powder bed fusion and directed energy deposition. - Provides a clear process description of additive friction stir deposition and highlights key capabilities - Summarizes the current research and application of additive friction stir deposition, including material flow, microstructure evolution, repair and dissimilar material cladding - Discusses future applications and areas of research for this technology
Download or read book Titanium written by Gerd Lütjering and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were motivated to prepare this book by the absence of any recent comprehensive book on titanium. The intent of this book is to provide a modern compendium that addresses both the phyical metallurgy as well as the applications of titanium. Until now the only book on this subject is that by Zwicker which was written in German and published almost 30 years ago. Chapter 1 is an introduction to the subject including some historical aspects of titanium. Chapter 2 is a s- mary of the Fundamental Aspects of Titanium, Chapter 3 is a summary of the Technological Aspects of Titanium and Chapters 4 through 9 address the specifics of the various classes of titanium ranging from CP Titanium to Titanium Matrix Composites. Finally, Chapter 10 covers “special” properties and applications of titanium. Our intent has been to address the subject conceptually rather than provide quantities of data of the sort that would be found in a Handbook. It is our intent that this book is useful for materials scientists and engineers interested in using titanium and for students either as a sourcebook or as a textbook. We have - tempted to include a representative set of references which provide additional detail for readers interested in specific aspects of titanium. Because of the re- tively recent growth of the technological importance of titanium, there is a vo- minous literature on titanium. While our references span this literature it has proven impossible to mention every contribution.
Download or read book From Microstructure Investigations to Multiscale Modeling written by Delphine Brancherie and published by John Wiley & Sons. This book was released on 2018-01-04 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical behaviors of materials are highly influenced by their architectures and/or microstructures. Hence, progress in material science involves understanding and modeling the link between the microstructure and the material behavior at different scales. This book gathers contributions from eminent researchers in the field of computational and experimental material modeling. It presents advanced experimental techniques to acquire the microstructure features together with dedicated numerical and analytical tools to take into account the randomness of the micro-structure.
Download or read book Additive Manufacturing of Titanium Alloys written by Bhaskar Dutta and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing of Titanium Alloys: State of the Art, Challenges and Opportunities provides alternative methods to the conventional approach for the fabrication of the majority of titanium components produced via the cast and wrought technique, a process which involves a considerable amount of expensive machining. In contrast, the Additive Manufacturing (AM) approach allows very close to final part configuration to be directly fabricated minimizing machining cost, while achieving mechanical properties at least at cast and wrought levels. In addition, the book offers the benefit of significant savings through better material utilization for parts with high buy-to-fly ratios (ratio of initial stock mass to final part mass before and after manufacturing). As titanium additive manufacturing has attracted considerable attention from both academicians and technologists, and has already led to many applications in aerospace and terrestrial systems, as well as in the medical industry, this book explores the unique shape making capabilities and attractive mechanical properties which make titanium an ideal material for the additive manufacturing industry. - Includes coverage of the fundamentals of microstructural evolution in titanium alloys - Introduces readers to the various Additive Manufacturing Technologies, such as Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) - Looks at the future of Titanium Additive Manufacturing - Provides a complete review of the science, technology, and applications of Titanium Additive Manufacturing (AM)
Download or read book Titanium Alloys written by W Sha and published by Elsevier. This book was released on 2009-04-29 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given their growing importance in the aerospace, automotive, sports and medical sectors, modelling the microstructure and properties of titanium and its alloys is a vital part of research into the development of new applications. This is the first time a book has been dedicated to modelling techniques for titanium.Part one discusses experimental techniques such as microscopy, synchrotron radiation X-ray diffraction and differential scanning calorimetry. Part two reviews physical modelling methods including thermodynamic modelling, the Johnson-Mehl-Avrami method, finite element modelling, the phase-field method, the cellular automata method, crystallographic and fracture behaviour of titanium aluminide and atomistic simulations of interfaces and dislocations relevant to TiAl. Part three covers neural network models and Part four examines surface engineering products. These include surface nitriding: phase composition, microstructure, mechanical properties, morphology and corrosion; nitriding: modelling of hardness profiles and kinetics; and aluminising: fabrication of Ti coatings by mechanical alloying.With its distinguished authors, Titanium alloys: Modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with titanium modelling, as well as users of titanium, titanium alloys and titanium aluminide in the aerospace, automotive, sports and medical implant sectors. - Comprehensively assesses modelling techniques for titanium, including experimental techniques such as microscopy and differential scanning calorimetry - Reviews physical modelling methods including thermodynamic modelling and finite element modelling - Examines surface engineering products with specific chapters focused on surface nitriding and aluminising
Download or read book The Effect of Microstructure on Fatigue Crack Propagation in Ti 6Al 6V 2Sn Alloy written by Maurice F. Amateau and published by . This book was released on 1971 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fatigue crack growth behavior of Ti-6Al-6V-2Sn was investigated for five different microstructures, using contoured double-cantilever beam specimens. The fatigue crack growth behavior was compared with the mechanical strength, toughness, and ductility properties for each microstructure. The fatigue fracture suffaces were examined with a scanning electron microscope. Annealed structures consisting of equiaxed primary alpha have the lowest crack growth resistance, while the acicular alpha microstructure resulting from beta annealing has a growth resistance four times greater in the intermediate growth regime. No simple model of crack growth rate using gross mechanical properties describes the relative magnitude nor the ralative order of crack resistance among the different microstructures. (Author).
Download or read book Fretting Fatigue written by David W. Hoeppner and published by ASTM International. This book was released on 2000 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes 36 of the 40 papers presented at the symposium, and a collection of six keynote papers providing background on the subject. Topics covered include parameter effects, environmental effects, crack nucleation, material and microstructural effects, damage analysis, fracture mechanic
