Download or read book Interfaces in Metal Matrix Composites written by Arthur G. Metcalfe and published by Elsevier. This book was released on 2016-06-15 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces in Metal Matrix Composites, Volume 1 presents the position of the science of interfaces, as well as the necessary background for the effort in progress to apply these materials. The book discusses the mechanical and physical aspects of the interface; the effect of the interface on longitudinal tensile properties; and the effect of the filament-matrix interface on off-axis tensile strength. The text also describes the role of the interface on elastic-plastic composite behavior; the effect of interface on fracture; and the interfaces in oxide reinforced metals and in directionally solidified eutectics. The effect of impurity on reinforcement-matrix compatibility is also considered. Metallurgical engineers and people involved in the study of materials science will find the book invaluable.
Download or read book Controlled Interphases in Composite Materials written by Hatsuo Ishida and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third International Conference on Composite Interfaces (ICCI-III) was held under the auspecies of ASM International, The Aluminum Company of America (Alcoa), The Edison Polymer Innovation Co. (EPIC), Case Western Reserve University, Nippon Glass Fiber Co., Nitto Boseki Co., Office of Naval Reserach (ONR), SAMPE Japan, Teijin Co., Mobay Co., Union Carbide Co., and Vetrotex Sain-Gobain. The underlying philosophy of the conference continues to be the promotion of fundamental understanding of the structure and role of composite interfaces. With the growth of composite interface studies, the research direction naturally changes from characterization and understanding of interfacial structure to controlling this structure. For this reason, the conference was subtitled, "Controlled Interphase Structure." The rather unfamiliar phrase "interphase" is used to emphasize the interfacial region whose properties are different from the bulk. The importance of the interphase to the mechanochemical properties has been rapidly recognized among composite researchers in recent years. The conference incorporated nine sessions. No concurrent sessions were planned because of the strong interest among panicipants and organizers to intennix researchers from different disciplines. Papers presented were redistributed in Pans I throught V. Because of this, both the conference and proceedings are not organized based on the traditional disciplines or materials, but rather around concepts.
Download or read book Field Assisted Sintering written by Eugene A. Olevsky and published by Springer. This book was released on 2018-08-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.
Download or read book Interfaces in Composites written by and published by ASTM International. This book was released on 1969 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1989-01-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition of the well-received engineering materials book has been completely updated, and now contains over 1,100 citations. Thorough enough to serve as a text, and up-to-date enough to serve as a reference. There is a new chapter on strengthening mechanisms in metals, new sections on composites and on superlattice dislocations, expanded treatment of cast and powder-produced conventional alloys, plastics, quantitative fractography, JIC and KIEAC test procedures, fatigue, and failure analysis. Includes examples and case histories.
Download or read book Metal Matrix Composites written by Antonio Contreras Cuevas and published by Springer. This book was released on 2018-10-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
Download or read book Metal and Ceramic Matrix Composites written by Brian Cantor and published by CRC Press. This book was released on 2003-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts in their respective fields, Metal and Ceramic Matrix Composites provides a comprehensive overview of topics on specific materials and trends. It is a subject regularly included as a final year option in materials science courses and is also of much industrial and academic interest. The book begins wit
Download or read book Fiber Matrix and Interface Properties written by Christopher J. Spragg and published by ASTM International. This book was released on 1996 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing fiber-matrix adhesion and its characterization in composite materials, reports results from applying the most commonly used test methods, such as fragmentation, pull-out, and indentation, to high-performance composites and their constituents. The 13 papers were presented at a symposium i
Download or read book An Introduction to Metal Matrix Composites written by T. W. Clyne and published by Cambridge University Press. This book was released on 1993 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal matrix composites constitute a new class of materials, now starting to make a major industrial impact in fields as diverse as aerospace, automotives and electronics. This book gives a comprehensive, integrated coverage of these materials, including the background to analytical-, experimental-, production and application-oriented aspects. Clear pictorial descriptions are given of the basic principles governing various properties and characteristics; these encompass mechanical, thermal, electrical, environmental and wear behaviour. Coverage also extends to material processing and component fabrication aspects and to a survey of commercial usage. This book is aimed primarily at scientists, engineers, production managers and all those involved in research on new materials in general, and metal matrix composites in particular, but may also be suitable for use as a text in beginning graduate and advanced undergraduate courses.
Download or read book Metal Matrix Composites written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.
Download or read book Metal Ceramic Interfaces written by M. Rühle and published by Elsevier. This book was released on 2013-10-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomistics of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.
Download or read book Interfaces in Particle and Fibre Reinforced Composites written by Kheng-Lim Goh and published by Woodhead Publishing. This book was released on 2019-11-27 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces in Particle and Fibre-Reinforced Composites: From Macro- to Nanoscale addresses recent research findings on the particle-matrix interface at different length scales. The book's main focus is on the reinforcement of materials by particles that can result in a composite material of high stiffness and strength, but it also focuses on how the particle interacts with the (matrix) material, which may be a polymer, biological-based material, ceramic or conventional metal. The different types of particle reinforced composites are discussed, as is load transfer at the particle-matrix interface. Readers will learn how to select materials and about particle structure. Significant progress has been made in applying these approaches, thus making this book a timely piece on recent research findings on the particle-matrix interface at different length scales. - Features wide coverage, from polymer, to ceramics and metal-based particulate composites - Structured in a logical order to cover fundamental studies, computer simulations, experimental techniques and characterization
Download or read book NASA Technical Paper written by and published by . This book was released on 1977 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Paper written by United States. National Aeronautics and Space Administration and published by . This book was released on 1977 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties of Metallic Composites written by Shojiro Ochiai and published by CRC Press. This book was released on 1993-12-17 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of dispersion-hardened and fibre-reinforced alloys, addressing principal mechanisms, processing and applications. Mechanical behaviour based on dislocation theory and elastic-plastic mechanics is dealt with and data on advanced composites are provided.
Download or read book Composite Materials written by F. L. Matthews and published by Woodhead Publishing. This book was released on 1999 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on quasilinear elliptic differential equations of degenerate type, evolution variational inequalities, and multidimensional hysteresis. It serves both as a survey of results in the field, and as an introductory text for non-specialists interested in related problems.
Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.
