Download or read book Effect of Initial Conditions and Depressurization on Lock Exchange Flow After a Depressurized Conduction Cool Down Event in the High Temperature Test Facility written by Molly Glass and published by . This book was released on 2017 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The High Temperature Test Facility (HTTF) is an electrically heated, scaled model of a Modular High Temperature Gas Reactor (MHTGR). Five experiments were conducted to study Depressurized Conduction Cool-Down phenomena stemming from a Double-Ended Guillotine Break (DEGB). After a DEGB, the reactor pressure vessel would depressurize until the pressures are equalized between the cavity that surrounds the reactor vessel and the vessel itself. Immediately following the depressurization there would be a large density gradient between the reactor vessel, which is full of hot helium and the cavity mixture of cold air and discharged helium. This density gradient would drive lock exchange flow, where the less dense helium would travel along the top of the pipe and the denser cavity gas would intrude into the bottom of the pipe and propagate towards the lower plenum. The cavity gas would then fill the lower plenum up to the top elevation of the hot leg pipe, which would then diffuse air into the core, potentially compromising core support and fuel integrity by graphite oxidation. Lock exchange flow is a density driven mechanism that depends on the density gradient between the cavity and the pressure vessel. Gas concentrations and temperatures greatly affect density and thus affect key time characteristics of lock exchange flow. The key time characteristics to be studied in the five experiments are: the time for the gas front to arrive at the thermocouple instrumentation in the cross-duct outside the lower plenum, the time to fill the lower plenum, and the times to reach instrumented posts in the lower plenum at various heights. The time to reach the plenum will indicate the speed at which the cold dense gas front is travelling. The time to fill the lower plenum is also the time of onset of molecular diffusion. The time the gas front reaches each instrumented post will display how the cold dense gas front propagates through the plenum. The first three of five tests were conducted at ambient temperatures with initially equalized pressures between the Reactor Cavity Simulation Tank (RCST) and the Primary Pressure Vessel (PPV). The next test was a heated depressurization, and the last test was a heated test with pressures initially equalized. These three categories of tests vary initial conditions that will change lock exchange flow time characteristics.
Download or read book Benchmark Experiments Development and Needs in Support of Advanced Reactor Design written by Mark David DeHart and published by Frontiers Media SA. This book was released on 2023-08-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Columbia Crew Survival Investigation Report written by Nasa and published by PDQ Press. This book was released on 2009 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA commissioned the Columbia Accident Investigation Board (CAIB) to conduct a thorough review of both the technical and the organizational causes of the loss of the Space Shuttle Columbia and her crew on February 1, 2003. The accident investigation that followed determined that a large piece of insulating foam from Columbia's external tank (ET) had come off during ascent and struck the leading edge of the left wing, causing critical damage. The damage was undetected during the mission. The Columbia accident was not survivable. After the Columbia Accident Investigation Board (CAIB) investigation regarding the cause of the accident was completed, further consideration produced the question of whether there were lessons to be learned about how to improve crew survival in the future. This investigation was performed with the belief that a comprehensive, respectful investigation could provide knowledge that can protect future crews in the worldwide community of human space flight. Additionally, in the course of the investigation, several areas of research were identified that could improve our understanding of both nominal space flight and future spacecraft accidents. This report is the first comprehensive, publicly available accident investigation report addressing crew survival for a human spacecraft mishap, and it provides key information for future crew survival investigations. The results of this investigation are intended to add meaning to the sacrifice of the crew's lives by making space flight safer for all future generations.
Download or read book Buoyancy Effects in Fluids written by John Stewart Turner and published by Cambridge University Press. This book was released on 1979-12-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomena treated in this book all depend on the action of gravity on small density differences in a non-rotating fluid. The author gives a connected account of the various motions which can be driven or influenced by buoyancy forces in a stratified fluid, including internal waves, turbulent shear flows and buoyant convection. This excellent introduction to a rapidly developing field, first published in 1973, can be used as the basis of graduate courses in university departments of meteorology, oceanography and various branches of engineering. This edition is reprinted with corrections, and extra references have been added to allow readers to bring themselves up to date on specific topics. Professor Turner is a physicist with a special interest in laboratory modelling of small-scale geophysical processes. An important feature is the superb illustration of the text with many fine photographs of laboratory experiments and natural phenomena.
Download or read book Advances in High Temperature Gas Cooled Reactor Fuel Technology written by International Atomic Energy Agency and published by . This book was released on 2012-06 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reports on the results of a coordinated research project on advances in high temperature gas cooled reactor (HTGR) fuel technology and describes the findings of research activities on coated particle developments. These comprise two specific benchmark exercises with the application of HTGR fuel performance and fission product release codes, which helped compare the quality and validity of the computer models against experimental data. The project participants also examined techniques for fuel characterization and advanced quality assessment/quality control. The key exercise included a round-robin experimental study on the measurements of fuel kernel and particle coating properties of recent Korean, South African and US coated particle productions applying the respective qualification measures of each participating Member State. The summary report documents the results and conclusions achieved by the project and underlines the added value to contemporary knowledge on HTGR fuel.
Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Cal OSHA Pocket Guide for the Construction Industry written by and published by . This book was released on 2015-01-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cal/OSHA Pocket Guide for the Construction Industry is a handy guide for workers, employers, supervisors, and safety personnel. This latest 2011 edition is a quick field reference that summarizes selected safety standards from the California Code of Regulations. The major subject headings are alphabetized and cross-referenced within the text, and it has a detailed index. Spiral bound, 8.5 x 5.5"
Download or read book Handbook of Small Modular Nuclear Reactors written by Daniel T. Ingersoll and published by Woodhead Publishing. This book was released on 2020-10-22 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Small Modular Nuclear Reactors, Second Edition is a fully updated comprehensive reference on Small Modular Reactors (SMRs), which reflects the latest research and technological advances in the field from the last five years. Editors Daniel T. Ingersoll and Mario D. Carelli, along with their team of expert contributors, combine their wealth of collective experience to update this comprehensive handbook that provides the reader with all required knowledge on SMRs, expanding on the rapidly growing interest and development of SMRs around the globe. This book begins with an introduction to SMRs for power generation, an overview of international developments, and an analysis of Integral Pressurized Water Reactors as a popular class of SMRs. The second part of the book is dedicated to SMR technologies, including physics, components, I&C, human-system interfaces and safety aspects. Part three discusses the implementation of SMRs, covering economic factors, construction methods, hybrid energy systems and licensing considerations. The fourth part of the book provides an in-depth analysis of SMR R&D and deployment of SMRs within eight countries, including the United States, Republic of Korea, Russia, China, Argentina, and Japan. This edition includes brand new content on the United Kingdom and Canada, where interests in SMRs have increased considerably since the first edition was published. The final part of the book adds a new analysis of the global SMR market and concludes with a perspective on SMR benefits to developing economies. This authoritative and practical handbook benefits engineers, designers, operators, and regulators working in nuclear energy, as well as academics and graduate students researching nuclear reactor technologies. Presents the latest research on SMR technologies and global developments Includes new case study chapters on the United Kingdom and Canada and a chapter on global SMR markets Discusses new technologies such as floating SMRs and molten salt SMRs
Download or read book Liquid Metal Cooled Reactors written by International Atomic Energy Agency and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a survey of worldwide experience gained with fast breeder reactor design, development and operation. Coverage includes state of the art of liquid metal fast reactor development; lead-bismuth cooled (LBC) ship reactor operation experience and LBC fast power reactor development; and treatment and disposal of spent sodium.
Download or read book Status of Fast Reactor Research and Technology Development written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on a recommendation from the Technical Working Group on Fast Reactors, this publication is a regular update of previous publications on fast reactor technology. The publication provides comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors. The main issues of discussion are experience in design, construction, operation and decommissioning, various areas of research and development, engineering, safety and national strategies, and public acceptance of fast reactors. In the summary the reader will find national strategies, international initiatives on innovative (i.e. Generation IV) systems and an assessment of public acceptance as related to fast reactors."--Résumé de l'éditeur.
Download or read book Applied Engineering Principles Manual Training Manual NAVSEA written by Naval Sea Systems Command and published by . This book was released on 2019-07-15 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 1 ELECTRICAL REVIEW 1.1 Fundamentals Of Electricity 1.2 Alternating Current Theory 1.3 Three-Phase Systems And Transformers 1.4 Generators 1.5 Motors 1.6 Motor Controllers 1.7 Electrical Safety 1.8 Storage Batteries 1.9 Electrical Measuring Instruments Chapter 2 ELECTRONICS REVIEW 2.1 Solid State Devices 2.2 Magnetic Amplifiers 2.3 Thermocouples 2.4 Resistance Thermometry 2.5 Nuclear Radiation Detectors 2.6 Nuclear Instrumentation Circuits 2.7 Differential Transformers 2.8 D-C Power Supplies 2.9 Digital Integrated Circuit Devices 2.10 Microprocessor-Based Computer Systems Chapter 3 REACTOR THEORY REVIEW 3.1 Basics 3.2 Stability Of The Nucleus 3.3 Reactions 3.4 Fission 3.5 Nuclear Reaction Cross Sections 3.6 Neutron Slowing Down 3.7 Thermal Equilibrium 3.8 Neutron Density, Flux, Reaction Rates, And Power 3.9 Slowing Down, Diffusion, And Migration Lengths 3.10 Neutron Life Cycle And The Six-Factor Formula 3.11 Buckling, Leakage, And Flux Shapes 3.12 Multiplication Factor 3.13 Temperature Coefficient...
Download or read book Technology of Liquid Helium written by Richard H. Kropschot and published by . This book was released on 1968 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lightning Protection of Aircraft written by Franklin Fisher and published by CreateSpace. This book was released on 2012-07-13 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to present under one cover the current state of knowledge concerning the potential lightning effects on aircraft and that means that are available to designers and operators to protect against these effects. The impetus for writing this book springs from two sources- the increased use of nonmetallic materials in the structure of aircraft and the constant trend toward using electronic equipment to handle flight-critical control and navigation function.
Download or read book Benchmarking Severe Accident Computer Codes for Heavy Water Reactor Applications written by International Atomic Energy Agency and published by . This book was released on 2014-02-19 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reports on the results of an IAEA cooperated research project (CRP) on benchmarking severe accident computer codes for heavy water reactor applications. The CRP scope included the identification and selection of a severe accident sequence, selection of appropriate geometrical and boundary conditions, conduct of benchmark analyses, comparison of the results of all code outputs, evaluation of the capabilities of computer codes to predict important severe accident phenomena, and the proposal of necessary code improvements and/or new experiments to reduce uncertainties. The summary report provides a comparison of key results obtained from five participating countries and concludes with lessons learned and recommendations for the future.
Download or read book The Safety Relief Valve Handbook written by Marc Hellemans and published by Elsevier. This book was released on 2009-08-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves The Safety Valve Handbook contains all of the vital technical and standards information relating to safety valves used in the process industry for positive pressure applications. Explains technical issues of safety valve operation in detail, including identification of benefits and pitfalls of current valve technologies Enables informed and creative decision making in the selection and use of safety valves The Handbook is unique in addressing both US and European codes:- covers all devices subject to the ASME VIII and European PED (pressure equipment directive) codes;- covers the safety valve recommendations of the API (American Petroleum Institute);- covers the safety valve recommendations of the European Normalisation Committees;- covers the latest NACE and ATEX codes;- enables readers to interpret and understand codes in practice Extensive and detailed illustrations and graphics provide clear guidance and explanation of technical material, in order to help users of a wide range of experience and background (as those in this field tend to have) to understand these devices and their applications Covers calculating valves for two-phase flow according to the new Omega 9 method and highlights the safety difference between this and the traditional method Covers selection and new testing method for cryogenic applications (LNG) for which there are currently no codes available and which is a booming industry worldwide Provides full explanation of the principles of different valve types available on the market, providing a selection guide for safety of the process and economic cost Extensive glossary and terminology to aid readers’ ability to understand documentation, literature, maintenance and operating manuals Accompanying website provides an online valve selection and codes guide.
Download or read book Nuclear Power written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of nuclear power plants in the United States is stopping, as regulators, reactor manufacturers, and operators sort out a host of technical and institutional problems. This volume summarizes the status of nuclear power, analyzes the obstacles to resumption of construction of nuclear plants, and describes and evaluates the technological alternatives for safer, more economical reactors. Topics covered include: Institutional issues-including regulatory practices at the federal and state levels, the growing trends toward greater competition in the generation of electricity, and nuclear and nonnuclear generation options. Critical evaluation of advanced reactors-covering attributes such as cost, construction time, safety, development status, and fuel cycles. Finally, three alternative federal research and development programs are presented.
Download or read book Nuclear Safety in Light Water Reactors written by Bal Raj Sehgal and published by Academic Press. This book was released on 2012-01-05 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: La 4e de couverture indique : Organizes and presents all the latest thought on LWR nuclear safety in one consolidated volume, provided by the top experts in the field, ensuring high-quality, credible and easily accessible information.
