Download or read book Effect of Ignition and Combustion on Diesel Engine Emissions written by Derek T. Galligan and published by . This book was released on 2001 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Engine Combustion Instrumentation and Diagnostics written by Hua Zhao and published by SAE International. This book was released on 2001-01-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete description of instrumentation and in-cylinder measurement techniques for internal combustion engines. Written primarily for researchers and engineers involved in advanced research and development of internal combustion engines, the book provides an introduction to the instrumentation and experimental techniques, with particular emphasis on diagnostic techniques for in-cylinder measurements.
Download or read book Effects of Oxygenated Fuels on Direct Injection Diesel Combustion and Emissions written by Brian Eric Hallgren and published by . This book was released on 2000 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Compression Ignition Natural Gas Diesel Dual Fuel Engines written by Hongsheng Guo and published by Frontiers Media SA. This book was released on 2021-03-23 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HCCI and CAI Engines for the Automotive Industry written by Hua Zhao and published by CRC Press. This book was released on 2007-09-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.
Download or read book Diesel Combustion and Emissions written by Society of Automotive Engineers and published by . This book was released on 1981 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Engine written by Saiful Bari and published by BoD – Books on Demand. This book was released on 2013-04-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel engines, also known as CI engines, possess a wide field of applications as energy converters because of their higher efficiency. However, diesel engines are a major source of NOX and particulate matter (PM) emissions. Because of its importance, five chapters in this book have been devoted to the formulation and control of these pollutants. The world is currently experiencing an oil crisis. Gaseous fuels like natural gas, pure hydrogen gas, biomass-based and coke-based syngas can be considered as alternative fuels for diesel engines. Their combustion and exhaust emissions characteristics are described in this book. Reliable early detection of malfunction and failure of any parts in diesel engines can save the engine from failing completely and save high repair cost. Tools are discussed in this book to detect common failure modes of diesel engine that can detect early signs of failure.
Download or read book Practical Diesel Engine Combusion Analysis written by Bertrand Hsu and published by SAE International. This book was released on 2002-10-25 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The diesel engine is one of the most efficient types of heat engines and is widely used as a prime mover for many applications. In recent years, with the aid of modern computers, engine combustion modeling has made great progress. However, due to the complexities of the processes involved in the practical diesel engine, there are still too many unknowns preventing computational prediction to have the accuracy level required by industry. This book examines some basic characteristics of diesel engine combustion process, and describes the commonly used tool to analyze combustion - heat release analysis. It addition, Practical Diesel-Engine Combustion Analysis describes the performance changes that might be encountered in the engine user environment, with a goal of helping the reader analyze his own practical combustion problems. Chapters include: Combustion and Fuel-Injection Processes in the Diesel Engine Heat Release and its Effect on Engine Performance Alternate Fuels Combustion Analysis and more
Download or read book Intake Flow Effects on Combustion and Emissions in a Diesel Engine written by Tina R. Fuchs and published by . This book was released on 1997 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Emissions and Their Control written by Magdi K Khair and published by SAE International. This book was released on 2006-12-01 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will assist readers in meeting today's tough challenges of improving diesel engine emissions, diesel efficiency, and public perception of the diesel engine. It can be used as an introductory text, while at the same time providing practical information that will be useful for experienced readers. This comprehensive book is well illustrated with more than 560 figures and 80 tables. Each main section is broken down into chapters that offer more specific and extensive information on current issues, as well as answers to technical questions.
Download or read book Combustion Emission Formation Process in Diesel Engines written by and published by . This book was released on 2003 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
Download or read book Gasoline Compression Ignition Technology written by Gautam Kalghatgi and published by Springer Nature. This book was released on 2022-01-17 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on gasoline compression ignition (GCI) which offers the prospect of engines with high efficiency and low exhaust emissions at a lower cost. A GCI engine is a compression ignition (CI) engine which is run on gasoline-like fuels (even on low-octane gasoline), making it significantly easier to control particulates and NOx but with high efficiency. The state of the art development to make GCI combustion feasible on practical vehicles is highlighted, e.g., on overcoming problems on cold start, high-pressure rise rates at high loads, transients, and HC and CO emissions. This book will be a useful guide to those in academia and industry.
Download or read book Ignition Quality and Composition of Fuel Volatile Fraction written by Robert E. Bair and published by . This book was released on 1989 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect and Mechanisms of a Homogeneous Combustion Catalyst in the Reduction of Emissions from Diesel Combustion in Compression Ignition Engines written by You Ma and published by . This book was released on 2013 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: A ferrous picrate based homogeneous combustion catalyst has shown significant effectiveness in improving the fuel economies in compression ignition (diesel) engines. However, there has been a lack of knowledge of the effect and the working mechanisms of the catalyst in reducing the pollutant emissions, which has hindered the widespread application of the catalytic technology in diesel engines. The present research aimed to systematically assess the efficacy of the ferrous picrate catalyst in emission reductions from diesel engines and to further the understanding of the mechanisms behind the catalytic effect in diesel combustion processes. More specifically, this thesis work has successfully addressed the following specific research objectives: To confirm and quantify the effect of the catalyst in improving fuel consumptions and reducing pollutant emissions (UHC, CO, NOx and smoke) from a diesel engine fuelled with diesel and biodiesel; To investigate the effect of the catalyst on the key characteristics of soot particles from diesel engine combustions, including soot oxidation properties, soot nanostructure and particle size, soot chemical and elemental compositions; To ascertain the morphology and the ultimate fate of iron in the catalyst during diesel combustion process; and To reveal the mechanisms of the working of the catalyst in diesel soot formation during the combustion processes. To assess the effectiveness of the catalyst, a series of tests was performed on a laboratory diesel engine and a large-scale diesel engine facility as a function of engine speed, load and catalyst dosage. The beneficial effects were also examined with the engine fuelled with biodiesel fuel to realise the full potential of the catalyst. The tests consistently demonstrated a fuel saving of 1.1% - 3.8% over the range of conditions examined. The mechanisms of the catalyst in diesel engine combustions were studied by determining the differences in the characteristics of soot particles using a combination of several advanced analytical techniques, including TGA, SEM/TEM-EDS, FT-IR, NMR and elemental analyser. The evolution of iron in the catalyst during diesel combustion was also investigated to provide additional evidence for the understanding of the role of the catalyst in diesel combustion processes. Laboratory diesel engine tests with diesel fuel have showed the addition of the catalyst was able to reduce up to 39.5% smoke, 22.5% CO and 15.3% unburned hydrocarbons (UHC), as well as 3.8% specific fuel consumptions. As a consequence of the improved combustion efficiency, NOx was found to be elevated by up to 8.3% under the experimental conditions. Results from large-scale diesel engine tests showed that the use of the catalyst reduced up to 20.7% CO and 22.8% UHC at the cost of 5.3% increase in NOx. In biodiesel combustion, the smoke, CO and UHC emissions were reduced by up to 24.4%, 17.3% and 3.8% with the fuel consumptions saved by up to 2.8%, by the addition of the catalyst. It was also found that the NOx and CO2 from the biodiesel combustion were increased by up to 4.5% and 2.5% due to the enhanced combustion efficiency associated with the use of the catalyst...
