Download or read book Ice Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-12-15 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book presents ways to mitigate the disastrous effects of snow/ice accumulation and discusses the mechanisms of new coatings deicing technologies. The strategies currently used to combat ice accumulation problems involve chemical, mechanical or electrical approaches. These are expensive and labor intensive, and the use of chemicals raises serious environmental concerns. The availability of truly icephobic surfaces or coatings will be a big boon in preventing the devastating effects of ice accumulation. Currently, there is tremendous interest in harnessing nanotechnology in rendering surfaces icephobic or in devising icephobic surface materials and coatings, and all signals indicate that such interest will continue unabated in the future. As the key issue regarding icephobic materials or coatings is their durability, much effort is being spent in developing surface materials or coatings which can be effective over a long period. With the tremendous activity in this arena, there is strong hope that in the not too distant future, durable surface materials or coatings will come to fruition. This book contains 20 chapters by subject matter experts and is divided into three parts— Part 1: Fundamentals of Ice Formation and Characterization; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered include: factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; icephobicities of superhydrophobic surfaces; anti-icing using microstructured surfaces; icephobic surfaces: features and challenges; bio-inspired anti-icing surface materials; durability of anti-icing coatings; durability of icephobic coatings; bio-inspired icephobic coatings; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.

Download or read book Nanotechnology in Eco Efficient Construction written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2013-04-04 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the environmental impact of existing construction and building materials comes under increasing scrutiny, the search for more eco-efficient solutions has intensified. Nanotechnology offers great potential in this area and is already being widely used to great success. Nanotechnology in eco-efficient construction is an authoritative guide to the role of nanotechnology in the development of eco-efficient construction materials and sustainable construction.Following an introduction to the use of nanotechnology in eco-efficient construction materials, part one considers such infrastructural applications as nanoengineered cement-based materials, nanoparticles for high-performance and self-sensing concrete, and the use of nanotechnology to improve the bulk and surface properties of steel for structural applications. Nanoclay-modified asphalt mixtures and safety issues relating to nanomaterials for construction applications are also reviewed before part two goes on to discuss applications for building energy efficiency. Topics explored include thin films and nanostructured coatings, switchable glazing technology and third generation photovoltaic (PV) cells, high-performance thermal insulation materials, and silica nanogel for energy-efficient windows. Finally, photocatalytic applications are the focus of part three, which investigates nanoparticles for pollution control, self-cleaning and photosterilisation, and the role of nanotechnology in manufacturing paints and purifying water for eco-efficient buildings.Nanotechnology in eco-efficient construction is a technical guide for all those involved in the design, production and application of eco-efficient construction materials, including civil engineers, materials scientists, researchers and architects within any field of nanotechnology, eco-efficient materials or the construction industry. - Provides an authoritative guide to the role of nanotechnology in the development of eco-efficient construction materials and sustainable construction - Examines the use of nanotechnology in eco-efficient construction materials - Considers a range of important infrastructural applications, before discussing applications for building energy efficiency

Download or read book Aviation Weather written by United States. National Weather Service and published by . This book was released on 1965 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sport Aerodynamics written by Helge Noerstrud and published by Springer Science & Business Media. This book was released on 2009-06-23 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: In sport disciplines such as running, ice skating, bicycling and cross-country skiing the aerodynamic drag force constitutes the major obstacle to overcome. Furthermore, in ski jumping and in various activities involving a ball the aerodynamic lift force comes in addition into action. This book describes the various sport disciplines on the basis of aerodynamic analysis and also cover the biomechanics part by illustrative performance examples. Such treatment of the underlying physical phenomena of sport activities gives a valuable supplement to existing literature on sport. The reader will also be guided to references which exist for the various topics discussed, so she or he can go into a deeper study of the particular sport activity at wish.

Download or read book Perspectives in Fluid Dynamics written by G. K. Batchelor and published by Cambridge University Press. This book was released on 2003 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paperback edition of text on fluid dynamics for graduate students and specialists alike.

Download or read book Ice Adhesion written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-10-21 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book containing 18 chapters is divided into three parts: Part 1: Fundamentals of Ice Formation and Ice Characteristics; Part 2: Ice Adhesion and Its Measurement; and Part 3: Methods to Mitigate Ice Adhesion. The topics covered Include: Factors influencing the formation, adhesion and friction of ice; ice nucleation on solid surfaces; physics of ice nucleation and growth on a surface; condensation frosting; defrosting properties of structured surfaces; relationship between surface free energy and ice adhesion to surfaces; metrology of ice adhesion; test methods for quantifying ice adhesion strength to surfaces; interlaboratory studies of ice adhesion strength; mechanisms of surface icing and deicing technologies; anti-icing using microstructured surfaces; durability assessment of icephobic coatings; bio-inspired icephobic coatings; challenges in rational fabrication of icephobic surfaces; protection from ice accretion on aircraft; and numerical modeling and its application to inflight icing.

Download or read book General Aviation Aircraft Design written by Snorri Gudmundsson and published by Butterworth-Heinemann. This book was released on 2013-09-03 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the right answer the first time with this useful handbook of preliminary aircraft design. Written by an engineer with close to 20 years of design experience, General Aviation Aircraft Design: Applied Methods and Procedures provides the practicing engineer with a versatile handbook that serves as the first source for finding answers to realistic aircraft design questions. The book is structured in an "equation/derivation/solved example" format for easy access to content. Readers will find it a valuable guide to topics such as sizing of horizontal and vertical tails to minimize drag, sizing of lifting surfaces to ensure proper dynamic stability, numerical performance methods, and common faults and fixes in aircraft design. In most cases, numerical examples involve actual aircraft specs. Concepts are visually depicted by a number of useful black-and-white figures, photos, and graphs (with full-color images included in the eBook only). Broad and deep in coverage, it is intended for practicing engineers, aerospace engineering students, mathematically astute amateur aircraft designers, and anyone interested in aircraft design. - Organized by articles and structured in an "equation/derivation/solved example" format for easy access to the content you need - Numerical examples involve actual aircraft specs - Contains high-interest topics not found in other texts, including sizing of horizontal and vertical tails to minimize drag, sizing of lifting surfaces to ensure proper dynamic stability, numerical performance methods, and common faults and fixes in aircraft design - Provides a unique safety-oriented design checklist based on industry experience - Discusses advantages and disadvantages of using computational tools during the design process - Features detailed summaries of design options detailing the pros and cons of each aerodynamic solution - Includes three case studies showing applications to business jets, general aviation aircraft, and UAVs - Numerous high-quality graphics clearly illustrate the book's concepts (note: images are full-color in eBook only)

Download or read book Wind Turbines in Cold Climates written by Lorenzo Battisti and published by Springer. This book was released on 2015-02-16 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the key concerns regarding the operation of wind turbines in cold climates and focuses in particular on the analysis of icing and methods for its mitigation. Topics covered include the implications of cold climates for wind turbine design and operation, the relevance of icing for wind turbines, the icing process itself, ice prevention systems and thermal anti-icing system design. In each chapter, care is taken to build systematically on the basic knowledge, providing the reader with the level of detail required for a thorough understanding. An important feature is the inclusion of several original analytical and numerical models for ready computation of icing impacts and design assessment. The breadth of the coverage and the in-depth scientific analysis, with calculations and worked examples relating to both fluid dynamics and thermodynamics, ensure that the book will serve not only as a textbook but also as a practical manual for general design tasks.

Download or read book Automated Surface Observing System ASOS written by and published by . This book was released on 1993 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unsettled Topics in Unmanned Aerial Vehicle Icing written by Richard Hann and published by SAE International. This book was released on 2020-04-27 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned aerial vehicles (UAVs) are an emerging technology with a large variety of commercial and military applications. In-flight icing occurs during flight in supercooled clouds or freezing precipitation and is a potential hazard to all aircraft. In-flight icing on UAVs imposes a major limitation on the operational envelope. This report describes the unsettled topics related to UAV icing. First, typical UAV applications and the general hazards of icing are described. Second, an overview of the special technical characteristics of icing on autonomous and unmanned aircraft is given. Third, the operational challenges for flight in icing conditions are discussed. Fourth, technologies for ice protection that mitigate the icing hazard are introduced. Fifth, the tools and methods required to understand UAV icing and to develop aircraft with cold-weather capabilities are presented. Finally, an assessment of the current and future regulations regarding icing on UAVs is provided. Icing is a key challenge that the UAV industry needs to address in order to unlock the full potential of this emerging technology. UAVs must be capable of safe and reliable operation in a wide range of weather conditions. This report outlines the most important challenges and gives short- and long-term recommendations on how to solve UAV icing issues. NOTE: SAE EDGE™ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE™ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE™ Research Reports are not intended to resolve the challenges they identify or close any topic to further scrutiny. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2020008

Download or read book Applied Hydrodynamics written by Hubert Chanson and published by CRC Press. This book was released on 2013-08-30 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook treats Hydro- and Fluid Dynamics, the engineering science dealing with forces and energies generated by fluids in motion, playing a vital role in everyday life. Practical examples include the flow motion in the kitchen sink, the exhaust fan above the stove, and the air conditioning system in our home. When driving a car, the air flow around the vehicle body induces some drag which increases with the square of the car speed and contributes to excess fuel consumption. Engineering applications encompass fluid transport in pipes and canals, energy generation, environmental processes and transportation (cars, ships, aircrafts). This book deals with the topic of applied hydrodynamics. The lecture material is grouped into two complementary sections: ideal fluid flow and real fluid flow. The former deals with two- and possibly three-dimensional fluid motions that are not subject to boundary friction effects, while the latter considers the flow regions affected by boundary friction and turbulent shear. The lecture material is designed as an intermediate course in fluid dynamics for senior undergraduate and postgraduate students in Civil, Environmental, Hydraulic and Mechanical Engineering. It is supported by notes, applications, remarks and discussions in each chapter. Moreover a series of appendices is added, while some major homework assignments are developed at the end of the book, before the bibliographic references.

Download or read book Aircraft System Safety written by Duane Kritzinger and published by Woodhead Publishing. This book was released on 2016-09-12 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft System Safety: Assessments for Initial Airworthiness Certification presents a practical guide for the novice safety practitioner in the more specific area of assessing aircraft system failures to show compliance to regulations such as FAR25.1302 and 1309. A case study and safety strategy beginning in chapter two shows the reader how to bring safety assessment together in a logical and efficient manner. Written to supplement (not replace) the content of the advisory material to these regulations (e.g. AMC25.1309) as well as the main supporting reference standards (e.g. SAE ARP 4761, RTCA/DO-178, RTCA/DO-154), this book strives to amalgamate all these different documents into a consolidated strategy with simple process maps to aid in their understanding and optimise their efficient use. - Covers the effect of design, manufacturing, and maintenance errors and the effects of common component errors - Evaluates the malfunctioning of multiple aircraft components and the interaction which various aircraft systems have on the ability of the aircraft to continue safe flight and landing - Presents and defines a case study (an aircraft modification program) and a safety strategy in the second chapter, after which each of the following chapters will explore the theory of the technique required and then apply the theory to the case study

Download or read book Civil and Military Airworthiness written by Kyriakos I. Kourousis and published by MDPI. This book was released on 2020-05-27 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Airworthiness, as a field, encompasses the technical and non-technical activities required to design, certify, produce, maintain, and safely operate an aircraft throughout its lifespan. The evolving technology, science, and engineering methods and, most importantly, aviation regulation, offer new opportunities and create, new challenges for the aviation industry. This book assembles review and research articles across a variety of topics in the field of airworthiness: aircraft maintenance, safety management, human factors, cost analysis, structures, risk assessment, unmanned aerial vehicles and regulations. This selection of papers informs the industry practitioners and researchers on important issues.

Download or read book Morphing Wing Technologies written by Sergio Ricci and published by Butterworth-Heinemann. This book was released on 2017-10-27 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Morphing Wings Technologies: Large Commercial Aircraft and Civil Helicopters offers a fresh look at current research on morphing aircraft, including industry design, real manufactured prototypes and certification. This is an invaluable reference for students in the aeronautics and aerospace fields who need an introduction to the morphing discipline, as well as senior professionals seeking exposure to morphing potentialities. Practical applications of morphing devices are presented—from the challenge of conceptual design incorporating both structural and aerodynamic studies, to the most promising and potentially flyable solutions aimed at improving the performance of commercial aircraft and UAVs. Morphing aircraft are multi-role aircraft that change their external shape substantially to adapt to a changing mission environment during flight. The book consists of eight sections as well as an appendix which contains both updates on main systems evolution (skin, structure, actuator, sensor, and control systems) and a survey on the most significant achievements of integrated systems for large commercial aircraft. - Provides current worldwide status of morphing technologies, the industrial development expectations, and what is already available in terms of flying systems - Offers new perspectives on wing structure design and a new approach to general structural design - Discusses hot topics such as multifunctional materials and auxetic materials - Presents practical applications of morphing devices

Download or read book Progress in Adhesion and Adhesives written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2015-07-27 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 13 review articles written by subject experts and published in 2014 in the Journal Reviews of Adhesion and Adhesives. The rationale for publication of this book is that currently the RAA has limited circulation, so this book provides broad exposure and dissemination of the concise, critical, illuminating, and thought-provoking review articles. The subjects of the reviews fall into 4 general areas: 1. Polymer surface modification 2. Biomedical, pharmaceutical and dental fields 3. Adhesives and adhesive joints 4. General Adhesion Aspects The topics covered include: Adhesion of condensed bodies at microscale; imparting adhesion property to silicone material; functionally graded adhesively bonded joints; synthetic adhesives for wood panels; adhesion theories in wood adhesive bonding; adhesion and surface issues in biocomposites and bionanocomposites; adhesion phenomena in pharmaceutical products and applications of AFM; cyanoacrylate adhesives in surgical applications; ways to generate monosort functionalized polyolefin surfaces; nano-enhanced adhesives; bonding dissimilar materials in dentistry; flame treatment of polymeric materials—relevance to adhesion; and mucoadhesive polymers for enhancing retention of ocular drug delivery.

Download or read book Mixed Phase Clouds written by Constantin Andronache and published by Elsevier. This book was released on 2017-09-28 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Phase Clouds: Observations and Modeling presents advanced research topics on mixed-phase clouds. As the societal impacts of extreme weather and its forecasting grow, there is a continuous need to refine atmospheric observations, techniques and numerical models. Understanding the role of clouds in the atmosphere is increasingly vital for current applications, such as prediction and prevention of aircraft icing, weather modification, and the assessment of the effects of cloud phase partition in climate models. This book provides the essential information needed to address these problems with a focus on current observations, simulations and applications. - Provides in-depth knowledge and simulation of mixed-phase clouds over many regions of Earth, explaining their role in weather and climate - Features current research examples and case studies, including those on advanced research methods from authors with experience in both academia and the industry - Discusses the latest advances in this subject area, providing the reader with access to best practices for remote sensing and numerical modeling

Download or read book Aviation Meteorology Observations and Models written by Ismail Gultepe and published by Birkhäuser. This book was released on 2019-11-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Topical Volume focuses on aviation meteorology for operations and research, covering important topics related to wind and turbulence, visibility, fog and precipitation, convection and lightning, icing, blowing snow, and ice cloud microphysics and dynamics. In addition to forecasting issues, the impact of climate on aviation operations is also highlighted, as temperature and moisture changes can affect aircraft aerodynamic conditions, such as lift and drag forces. This work uses measurements from state of art in-situ instruments and simulation results from numerical weather prediction (NWP) and climate models. New technologies related to satellites, radars, lidars, and UAVs (Unmanned Aerial Vehicles) are described, as well as new analysis methods related to artificial intelligence (AI) and neural network systems. Use of remote sensing platforms, including satellites, radars, radiometers, ceilometers, sodars, and lidars, as well as knowledge of the in-situ observations for the monitoring and short-term forecasting of wind, turbulence, gust, clear air turbulence (CAT), low visibility due to fog and clouds, and precipitation types are required for aviation operations at the airports and high level flying conditions. This book provides extensive knowledge for aviation-related meteorological processes and events that include short and long term prediction of high impact weather systems. Aviation experts, weather offices, pilots, university students, postgraduates, and researchers interested in aviation and meteorology, including new instruments for measurements applicable to forecasting and nowcasting, can benefit from consulting and reading this book. This book provides a comprehensive overview of our existing knowledge and the numerous remaining difficulties in predicting and measuring issues related to wind and turbulence, convection, fog and visibility, various cloud types, icing, and ice clouds at various time and space scales. Previously published in Pure and Applied Geophysics, Volume 176, Issue 5, 2019