Download or read book Effect of Fluid Properties on Mass Transfer in the Gas Phase written by Edward Joseph Lynch and published by . This book was released on 1953 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Gas phase Properties on Mass Transfer Rate written by Edward J. Moll and published by . This book was released on 1962 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Pressure on Mass Transfer in the Gas Phase written by Robert Joseph Fallat and published by . This book was released on 1959 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbulent Multiphase Flows with Heat and Mass Transfer written by Roland Borghi and published by John Wiley & Sons. This book was released on 2013-12-31 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous industrial systems or natural environments involve multiphase flows with heat and mass transfer. The authors of this book present the physical modeling of these flows, in a unified way, which can include various physical aspects and several levels of complexity. Thermal engineering and nuclear reactors; the extraction and transport of petroleum products; diesel and rocket engines; chemical engineering reactors and fluidized beds; smoke or aerosol dispersion; landslides and avalanches &− the modeling of multiphase flows with heat and mass transfer for all these situations can be developed following a common methodology. This book is devoted to the description of the mathematical bases of how to incorporate adequate physical ingredients in agreement with known experimental facts and how to make the model evolve according to the required complexity. Contents Part 1. Approach and General Equations 1. Towards a Unified Description of Multiphase Flows. 2. Instant Equations for a Piecewise Continuous Medium. 3. Description of a “Mean Multiphase Medium”. 4. Equations for the Mean Continuous Medium. Part 2. Modeling: A Single Approach Adaptable to Multiple Applications 5. The Modeling of Interphase Exchanges. 6. Modeling Turbulent Dispersion Fluxes. 7. Modeling the Mean Gas–Liquid Interface Area per Unit Volume. 8. “Large Eddy Simulation” Style Models. 9. Contribution of Thermodynamics of Irreversible Processes. 10. Experimental Methods. 11. Some Experimental Results Pertaining to Multiphase Flow Properties that Are Still Little Understood. Part 3. From Fluidized Beds to Granular Media 12. Fluidized Beds. 13. Generalizations for Granular Media. 14. Modeling of Cauchy Tensor of Sliding Contacts. 15. Modeling the Kinetic Cauchy Stress Tensor. Part 4. Studying Fluctuations and Probability Densities 16. Fluctuations of the Gas Phase in Reactive Two-Phase Media. 17. Temperature Fluctuations in Condensed Phases. 18. Study of the PDF for Velocity Fluctuations and Sizes of Parcels. About the Authors Roland Borghi is Professor Emeritus at Ecole Centrale Marseille in France and works as a consultant in the space, petrol and automobile sectors. His research activities cover fluid mechanics, combustion and flames, and multi-phase and granular flows. He was a member of the CNRS scientific committee and a laureate of the French Academy of Science. Fabien Anselmet is Professor at Ecole Centrale Marseille in France. His research activities focus on the turbulence of fluids and its varied applications in industry and in fields linked to the environment. With a unified, didactic style, this text presents tangible models of multiphase flows with heat and mass transfer with attention to various levels of complexities. It addresses thermal engineering and nuclear reactors, extraction and transport of petroleum products, diesel engines and rocket engines, chemical engineering reactors and fluidized beds, smoke or aerosol dispersion, and landslides and avalanches. Engineers, researchers, and scientists will appreciate the discussions of modeling principles, flows and granular media, and fluctuations around averages.

Download or read book The Effect of Molecular Properties on Gas Phase Mass Transfer Coefficients written by Luther James Reid and published by . This book was released on 1957 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Two Phase Gas Liquid Flow in Pipes with Different Orientations written by Afshin J. Ghajar and published by Springer Nature. This book was released on 2020-03-14 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two -phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, this volume presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques.

Download or read book The Effect of Gas Properties and Operating Conditions on the Gas Phase Mass Transfer Coefficient written by Joel Elliot Margolis and published by . This book was released on 1956 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bubbles in Polymeric Liquids written by S.P. Levitsky and published by CRC Press. This book was released on 1995-01-09 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Authors' Preface The advancements of technology . . . and chemical engineering have brought about extensive use of a wide range of rheologically complex materials, e.g., polymeric solutions and melts, suspensions, mixtures, oil products, fibre-forming substances, etc. that are characterized by diverse and, every so often, significant deviations from classical Newtonian behavior. Such materials are often used in conditions where the formation of vapor-gas bubbles or two-phase flow regimes is possible. This necessitates deep investigations into the thermo-hydrodynamic problems of liquids with bubbles for the case of a continuous phase with anomalous rheological properties. These conditions are typical of a number of applications and manufacturing processes, e.g., gas removal from polymeric solutions or melts in production of film, chemical fibres and other polymeric materials. . . . The bubbles containing gas or vapor-gas mixtures are often present in polymeric systems. This is because of a number of reasons, e.g., a low wettability of solid surfaces by polymers, the use of volatile solvents, abundance of vapor-gas nuclei, the capture of gas by porous or fibre-like polymeric particles during the polymer dissolution or melting, etc. Spontaneous evacuation of bubbles in polymeric media is usually complicated by a high viscosity of the liquid; therefore two-phase polymeric systems possess a higher sedimentation and aggregation stability than bubble mixtures in low-molecular-weight liquids. One of the main problems in the dynamics of vapor-liquid and gas-liquid systems is the investigation of heat and mass transfer and phase interactions in a liquid with bubbles. The decisive importance of this problem in the analysis of various aspects of the bubbly fluid behavior under diverse conditions, in particular, during a sound wave propagation, has given impetus to numerous researches. The current state of art in the investigation of Newtonian liquids with bubbles is described in voluminous literature. However, these problems have been much less studied for non-Newtonian systems. Behavior of bubbles in polymeric liquids is of great interest because of wide application in chemical technology. . . . In a number of processes connected with the application of polymeric fluids, the dynamic interaction of bubbles with liquid phase plays the key role. Such interaction in the case of a polymeric liquid phase are essentially influenced by the specific properties of macromolecular fluids, including primarily the rheological effects. These effects in the bubble dynamics combined with heat and mass transfer between the bubble content and the ambient liquid constitute the main subject of the analysis presented in this book. Macrokinetics Laboratory, and Full Professor at the Byelorussian Polytechnic Institute, Department of Heat and Power Engineering. Dr. Schulman is recognized as a leading authority in his field of investigation. Extensive Bibliography: A valuable feature of this new book is its extensive international bibliography, with 393 references.

Download or read book Heat Transfer of Laminar Mixed Convection of Liquid written by De-Yi Shang and published by Springer. This book was released on 2016-03-08 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new algorithm to calculate fluid flow and heat transfer of laminar mixed convection. It provides step-by-step tutorial help to learn quickly how to set up the theoretical and numerical models of laminar mixed convection, to consider the variable physical properties of fluids, to obtain the system of numerical solutions, to create a series of formalization equations for the convection heat transfer by using a curve-fitting approach combined with theoretical analysis and derivation. It presents the governing ordinary differential equations of laminar mixed convection, equivalently transformed by an innovative similarity transformation with the description of the related transformation process. A system of numerical calculations of the governing ordinary differential equations is presented for the water laminar mixed convection. A polynomial model is induced for convenient and reliable treatment of variable physical properties of liquids. The developed formalization equations of mixed convection heat transfer coefficient have strong theoretical and practical value for heat transfer applications because they are created based on a better consideration of variable physical properties of fluids, accurate numerical solutions and rigorous formalization equations combined with rigorous theoretical derivation. This book is suitable for scientific researchers, engineers, professors, master and PhD students of fluid mechanics and convection heat and mass transfer.

Download or read book Effects of the Gas Phase on Liquid solid Mass Transfer in a Trickle Bed written by Gary Scott Bliss and published by . This book was released on 1976 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Packed Bed Columns written by Nikolai Kolev and published by Elsevier. This book was released on 2006-08-08 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed bed columns are largely employed for absorption, desorption, rectification and direct heat transfer processes in chemical and food industry, environmental protection and also processes in thermal power stations like water purification, flue gas heat utilization and SO2 removal. These Separation processes, are estimated to account for 40%-70% of capital and operating costs in process industry. Packed bed columns are widely employed in this area. Their usage also for direct heat transfer between gas and liquid, enlarge their importance. They are the best apparatuses, from thermodynamical point of view, for mass and heat transfer processes between gas and liquid phase. Their wide spreading is due to low capital investments and operating costs. Since 1995 there has not been published a specialised book in this area, and this is a period of quick development of packed columns. Packed Bed Columns reflects the state of this field including the author's experience on creating and investigating of new packings, column internals and industrial columns. - Considers the theories of mass transfer processes and shows how they help the construction of highly effective packings - Complete information about the performance characteristics of different modern types of highly effective packings - Considers the models for calculation and areas of their application

Download or read book The Effect of Variable Properties on Liquid Phase Laminar Flow Mass Transfer written by Alan Sheldon Emanuel and published by . This book was released on 1965 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Liquid Solid Fluidization Engineering written by Liang-Shih Fan and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive mechanistic interpretation of the transport phenomena involved in various basic modes of gas-liquid-solid fluidization. These modes include, for example, those for three-phase fluidized beds, slurry columns, turbulent contact absorbers, and three-phase fluidized beds, slurry columns, turbulent contact absorbers, and three-phase transport. It summarizes the empirical correlations useful for predicting transport properties for each mode of of operation.Gas-Liquid-Solid Fluidization Engineering provides a comprehensive account of the state-of-the-art applications of the three-phase fluidization systems that are important in both small-and large-scale operations. These applications include fermentation,biological wastewater treatment, flue gas desulfurization and particulates removal, and resid hydrotreating. This book highlights the industrial implications of these applications. In addition, it discusses information gaps and future directions forresearch in this field.

Download or read book Liquid and gas phase mass transfer on bubble cap trays written by John Wesley Begley and published by . This book was released on 1959 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1966 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Two phase Momentum Heat and Mass Transfer in Chemical Process and Energy Engineering Systems written by Franz Durst and published by . This book was released on 1979 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1953-07 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: