EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Effect of Fiber Orientation on Initial Postbuckling Behavior and Imperfection Sensitivity of Composite Cylindrical Shells

Download or read book Effect of Fiber Orientation on Initial Postbuckling Behavior and Imperfection Sensitivity of Composite Cylindrical Shells written by N. S. Khot and published by . This book was released on 1970 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Koiter's approach is used to formulate the influence of fiber orientation on the behavior of the cylindrical shell in the initial postbuckling region. Results are presented for three-layer composite cylindrical shells of either glass-epoxy or boron-epoxy subjected to uniform axial compressive load. The results show that the initial postbuckling coefficient that characterizes the extent of imperfection sensitivity of a structure is greater for the glass-epoxy shells than for the boron- epoxy shells. For the glass-epoxy cylinders the slope of the load vs. end-shortening curve in the initial postbuckling region is found to have high negative value, which is not significantly affected by the change in fiber orientation. This suggests that the buckling of a nearly perfect glass-epoxy cylinder under prescribed end-shortening will be catastrophic, regardless of fiber orientation. However, for the boron-epoxy cylinders the negative slope varies with the change in fiber orientation, and whether the failure will be catastrophic or not will depend on the fiber orientation.

Book Postbuckling Behavior Of Plates And Shells

Download or read book Postbuckling Behavior Of Plates And Shells written by Hui-shen Shen and published by World Scientific. This book was released on 2017-01-13 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an expert in structure and stress analysis, the author has written extensively on functionally graded materials (FGMs), nonlinear vibration and dynamic response of functionally graded material plates in thermal environments, buckling and postbuckling analysis of single-walled carbon nanotubes in thermal environments. This book provides a comprehensive overview of the author's works which include significant contributions to the postbuckling behavior of plates and shells under different loading and environmental conditions.This book comprises eight chapters. Each chapter contains adequate introductory material so that an engineering graduate who is familiar with basic understanding of plates and shells will be able to follow it.

Book Numerical Methods for Imperfection Sensitivity Analysis of Stiffened Cylindrical Shells

Download or read book Numerical Methods for Imperfection Sensitivity Analysis of Stiffened Cylindrical Shells written by Richard L. Citerley and published by . This book was released on 1986 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report contains documentation for four computer programs used in the imperfection sensitivity analysis of cylindrical shells. The four programs are based upon Donnell's equation for cylindrical shells. The formulation of each program is worked in detail so others may make modification. Input and output instructions, together with the program listings, are provided. This report is in two volumes. Volume I discusses the development and applications of the programs, and Volume II is the user's manual.

Book Non Classical Problems in the Theory of Elastic Stability

Download or read book Non Classical Problems in the Theory of Elastic Stability written by Isaac Elishakoff and published by Cambridge University Press. This book was released on 2001-01-29 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: When a structure is put under an increasing compressive load, it becomes unstable and buckling occurs. Buckling is a particularly significant concern in designing shell structures such as aircraft, automobiles, ships, or bridges. This book discusses stability analysis and buckling problems and offers practical tools for dealing with uncertainties that exist in real systems. The techniques are based on two complementary theories which are developed in the text. First, the probabilistic theory of stability is presented, with particular emphasis on reliability. Both theoretical and computational issues are discussed. Secondly, the authors present the alternative to probability based on the notion of 'anti-optimization', a theory that is valid when the necessary information for probabilistic analysis is absent, that is, when only scant data are available. Design engineers, researchers, and graduate students in aerospace, mechanical, marine, and civil engineering who are concerned with issues of structural integrity will find this book a useful reference source.

Book Modern Problems of Structural Stability

Download or read book Modern Problems of Structural Stability written by Alexander P. Seyranian and published by Springer. This book was released on 2014-05-04 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability of structures is one of the most important and interesting fields in mechanics. This book is dedicated to fundamental concepts, problems and methods of structural stability along with qualitative understanding of instability phenomena. The methods presented are constructive and easy to implement in computer programs. Recent exciting experiments on dynamic stability of non-conservative systems are described and shown by many photographs.

Book Buckling Experiments  Experimental Methods in Buckling of Thin Walled Structures  Volume 2

Download or read book Buckling Experiments Experimental Methods in Buckling of Thin Walled Structures Volume 2 written by Josef Singer and published by John Wiley & Sons. This book was released on 2002-08-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Edited by Josef Singer, the world's foremost authority on structural buckling. * Time-saving and cost-effective design data for all structural, mechanical, and aerospace engineering researchers.

Book Scientific and Technical Aerospace Reports

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Book A Two Step Perturbation Method in Nonlinear Analysis of Beams  Plates and Shells

Download or read book A Two Step Perturbation Method in Nonlinear Analysis of Beams Plates and Shells written by Hui-Shen Shen and published by John Wiley & Sons. This book was released on 2013-07-03 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capability to predict the nonlinear response of beams, plates and shells when subjected to thermal and mechanical loads is of prime interest to structural analysis. In fact, many structures are subjected to high load levels that may result in nonlinear load-deflection relationships due to large deformations. One of the important problems deserving special attention is the study of their nonlinear response to large deflection, postbuckling and nonlinear vibration. A two-step perturbation method is firstly proposed by Shen and Zhang (1988) for postbuckling analysis of isotropic plates. This approach gives parametrical analytical expressions of the variables in the postbuckling range and has been generalized to other plate postbuckling situations. This approach is then successfully used in solving many nonlinear bending, postbuckling, and nonlinear vibration problems of composite laminated plates and shells, in particular for some difficult tasks, for example, shear deformable plates with four free edges resting on elastic foundations, contact postbuckling of laminated plates and shells, nonlinear vibration of anisotropic cylindrical shells. This approach may be found its more extensive applications in nonlinear analysis of nano-scale structures. Concentrates on three types of nonlinear analyses: vibration, bending and postbuckling Presents not only the theoretical aspect of the techniques, but also engineering applications of the method A Two-Step Perturbation Method in Nonlinear Analysis of Beams, Plates and Shells is an original and unique technique devoted entirely to solve geometrically nonlinear problems of beams, plates and shells. It is ideal for academics, researchers and postgraduates in mechanical engineering, civil engineering and aeronautical engineering.

Book Buckling Experiments  Experimental Methods in Buckling of Thin Walled Structures  Volume 1

Download or read book Buckling Experiments Experimental Methods in Buckling of Thin Walled Structures Volume 1 written by Josef Singer and published by John Wiley & Sons. This book was released on 1998-02-11 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by eminent researchers and renown authors of numerous publications in the buckling structures field. Deals with experimental investigation in the industry. Covers the conventional and more unconventional methods for testing for a wide variety of structures. Various parameters which may influence the test results are systemically highlighted including, imperfections, boundary conditions, loading conditions as well as the effects of holes and cut-outs.

Book Computerized Buckling Analysis of Shells

Download or read book Computerized Buckling Analysis of Shells written by David Bushnell and published by . This book was released on 1981 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Buckling of Shell Structures  on Land  in the Sea and in the Air

Download or read book Buckling of Shell Structures on Land in the Sea and in the Air written by J.F. Jullien and published by CRC Press. This book was released on 1991-09-09 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides better inputs for improvement of the buckling load predictions of stiffened cylindrical shells subjected to combined loading. It is based on the International Colloquium Buckling of shell structures, on land, in the sea and in the air, Lyon, France, 17 September 1991.

Book Computerized buckling analysis of shells

Download or read book Computerized buckling analysis of shells written by D. Bushnell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the work performed by Lockheed Palo Alto Research Labora tory, Palo Alto, California 94304. The work was sponsored by Air Force Office of Scientific Research, Bolling AFB, Washington, D. C. under Grant F49620-77-C-0l22 and by the Flight Dynamics Laboratory, Air Force Wright Aeronautical Laboratories, Wright-Patterson AFB, Ohio under Contract F3361S-76-C-31OS. The work was completed under Task 2307Nl, "Basic Research in Behavior of Metallic and Composite Components of Airframe Structures". The work was admini stered by Lt. Col. J. D. Morgan (AFOSR) and Dr. N. S. Khot (AFWAL/FIBRA). The contract work was performed between October 1977 and December 1980. The technical report was released by the Author in December 1981. Preface Many structures are assembled from parts which are thin. For example, a stiffened plate or cylindrical panel is composed of a sheet the thickness of which is small com pared to its length, breadth, and stiffener- spacing, and stiffeners the thickness of which is small compared to their _ heights and lengths. These assembled structures, loaded in compression, can buckle overall, that is sheet and stiffeners can collapse together in a general instability mode; the sheet can buckle locally between stiffeners; the stiffeners can cripple; and a variety of complex buckling interactions can occur involving local and overall deformations of both sheet and stiffeners. More complex, built-up structures can buckle in more complex and subtle ways.

Book Applied Mechanics Reviews

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Composites Properties and Applications

Download or read book Composites Properties and Applications written by Antonio Miravete and published by Woodhead Publishing. This book was released on 1993 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book 35th AIAA ASME ASCE AHS ASC Structures  Structural Dynamics  and Materials Conference

Download or read book 35th AIAA ASME ASCE AHS ASC Structures Structural Dynamics and Materials Conference written by and published by . This book was released on 1994 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: A five-volume collection of technical papers presented at the April 1994 conference. Some 350 papers are arranged by subjects including: rotorcraft dynamics; structural qualification/verification; finite element methods; buckling and postbuckling of curved panels and shells; advanced structural appl

Book Bulletin

    Book Details:
  • Author : Welding Research Council (U.S.)
  • Publisher :
  • Release : 1961
  • ISBN :
  • Pages : 520 pages

Download or read book Bulletin written by Welding Research Council (U.S.) and published by . This book was released on 1961 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book A Collection of Technical Papers

Download or read book A Collection of Technical Papers written by and published by . This book was released on 1980 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: