Download or read book Diesel Combustion and Emissions written by Society of Automotive Engineers and published by . This book was released on 1981 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Exhaust Gas Recirculation to Performance and Emissions of Diesel Engine written by Mustaqim Mohamad and published by . This book was released on 2010 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct injection (DI) diesel engine is well design today as a main power train solution for trucks and others relevant heavy duty vehicles. However, at the same time emission legislation, mainly for oxides of nitrogens (NOx) and particulate matter (PM) becomes more obvious, reducing their limit to extremely low values. One efficient method to control NOx in order to achieve the future emission limit are the rather high exhaust gas recirculation (EGR) rates accompanied by increased boost pressure to avoid the negative impact on soot emissions. EGR is one of the most effective means of reducing NOx emissions from compression ignition (CI) engines and is widely used in order to meet the emission standards. In the present work, experimental investigation has been carried out to make an analysis the NOx reduction characteristics and the effect to the engine performance by using exhaust gas recirculation between two different fueled engine using biodiesel (palm oil methyl ester B5) and light diesel. This experiment was carried out using a four-cylinder DI diesel engine Mitsubishi 4D68. The purpose of this experiment was conducted is to know the effect of EGR on diesel engine performance and the quantity of NOx emissions in diesel engine's exhaust. The performance of the diesel engine and the quantity of NOx emissions in exhaust gas with using EGR in this experiment will be compared with the performance of the engine and the quantity of NOx emissions in the exhaust gas which not using EGR during the experiment. The results obtained by experiments showing that the EGR has caused the engine performance decreased as compared with no use of EGR. EGR is the best solution for reduced the production of NOx in the exhaust.
Download or read book Analysis of Performance and Emissions of a Naturally Aspirated Stationary DI Diesel Engine with Exhaust Gas Recirculation written by Anant Krishna Bhat and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: India, being second largely populated country in the world and 70% of its population depends on agriculture as their main job. Stationary CI engines find wide applications in agricultural area for pumping water, power generation and other crop processing works. Even though emission regulations for such engine applications do not come under stringent norms, their contribution cannot be overlooked. NOx(Oxides of Nitrogen) is considered as one of the most objectionable pollutant from diesel engine. Exhaust Gas Recirculation (EGR), has long been of interest to engine designers, researchers, and regulating authorities in abating NOx. Implementation of EGR for naturally aspirated stationary diesel engines are relatively simple and a study of the application of high level EGR on such an engine is carried to study its impact on the other performance parameters. The results of this investigation give insight into the effect of EGR level on the development of gaseous emissions as well as mechanisms of its formation. Reductions in NOx amount are found to be remarkable with EGR but combustion quality deteriorates at higher loads and higher percentages of EGR due to a significant decrease of A/F ratio. EGR up to 60% is found optimum with 190 bar injection pressure without sacrificing thermal efficiency and increase in unburned HC significantly.
Download or read book Diesel Emissions and Their Control 2nd Edition written by W. Addy Majewski and published by SAE International. This book was released on 2023-12-20 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers, applied scientists, students, and individuals working to reduceemissions and advance diesel engine technology will find the secondedition of Diesel Emissions and Their Control to be an indispensablereference. Whether readers are at the outset of their learning journey orseeking to deepen their expertise, this comprehensive reference bookcaters to a wide audience.In this substantial update to the 2006 classic, the authors have expandedthe coverage of the latest emission technologies. With the industryevolving rapidly, the book ensures that readers are well-informed aboutthe most recent advances in commercial diesel engines, providing acompetitive edge in their respective fields. The second edition has alsostreamlined the content to focus on the most promising technologies.This book is rooted in the wealth of information available on DieselNet.com, where the “Technology Guide” papers offer in-depth insights. Eachchapter includes links to relevant online materials, granting readers accessto even more expertise and knowledge.The second edition is organized into six parts, providing a structuredjourney through every aspect of diesel engines and emissions control: Part I: A foundational exploration of the diesel engine, combustion, andessential subsystems. Part II: An in-depth look at emission characterization, health andenvironmental impacts, testing methods, and global regulations. Part III: A comprehensive overview of diesel fuels, covering petroleumdiesel, alternative fuels, and engine lubricants. Part IV: An exploration of engine efficiency and emission controltechnologies, from exhaust gas recirculation to engine control. Part V: The latest developments in diesel exhaust aftertreatment,encompassing catalyst technologies and particulate filters. Part VI: A historical journey through the evolution of dieselengine technology, with a focus on heavy-duty engines in the NorthAmerican market. (ISBN 9781468605693, ISBN 9781468605709, ISBN 9781468605716, DOI: 10.4271/9781468605709)
Download or read book Handbook of Air Pollution from Internal Combustion Engines written by Eran Sher and published by Academic Press. This book was released on 1998-03-20 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an important and valuable source for engineers and researchers in the area of internal combustion engines pollution control. It provides an excellent updated review of available knowledge in this field and furnishes essential and useful information on air pollution constituents, mechanisms of formation, control technologies, effects of engine design, effects of operation conditions, and effects of fuel formulation and additives. The text is rich in explanatory diagrams, figures and tables, and includes a considerable number of references. An important resource for engineers and researchers in the area of internal combustion engines and pollution control Presents and excellent updated review of the available knowledge in this area Written by 23 experts Provides over 700 references and more than 500 explanatory diagrams, figures and tables
Download or read book Air Pollution Control in Transport Engines written by and published by . This book was released on 1972 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Investigation of the Effects of Injection and EGR Parameters on the Emissions and Performance of Heavy Duty Direct Injection Diesel Engines written by David T. Montgomery and published by . This book was released on 1996 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Engine System Design written by Qianfan Xin and published by Elsevier. This book was released on 2011-05-26 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel Engine System Design links everything diesel engineers need to know about engine performance and system design in order for them to master all the essential topics quickly and to solve practical design problems. Based on the author's unique experience in the field, it enables engineers to come up with an appropriate specification at an early stage in the product development cycle. Links everything diesel engineers need to know about engine performance and system design featuring essential topics and techniques to solve practical design problems Focuses on engine performance and system integration including important approaches for modelling and analysis Explores fundamental concepts and generic techniques in diesel engine system design incorporating durability, reliability and optimization theories
Download or read book Modifying Diesel Engine Operating Parameters to Reduce Emissions written by W. F. Marshall and published by . This book was released on 1971 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.
Download or read book Natural Gas Engines written by Kalyan Kumar Srinivasan and published by Springer. This book was released on 2018-11-03 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the various advanced reciprocating combustion engine technologies that utilize natural gas and alternative fuels for transportation and power generation applications. It is divided into three major sections consisting of both fundamental and applied technologies to identify (but not limited to) clean, high-efficiency opportunities with natural gas fueling that have been developed through experimental protocols, numerical and high-performance computational simulations, and zero-dimensional, multizone combustion simulations. Particular emphasis is placed on statutes to monitor fine particulate emissions from tailpipe of engines operating on natural gas and alternative fuels.
Download or read book The Effects of Exhaust Gas Recirculation EGR on the Performance of Diesel Engine written by Samwel Semakula Maroa and published by . This book was released on 2018 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Technologies for Emission Control in Marine Diesel Engines written by Masaaki Okubo and published by Butterworth-Heinemann. This book was released on 2019-08-29 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Technologies for Emission Control in Marine Diesel Engines provides a unique overview on marine diesel engines and aftertreatment technologies that is based on the authors’ extensive experience in research and development of emission control systems, especially plasma aftertreatment systems. The book covers new and updated technologies, such as combustion improvement and after treatment, SCR, the NOx reduction method, Ox scrubber, DPF, Electrostatic precipitator, Plasma PM decomposition, Plasma NOx reduction, and the Exhaust gas recirculation method. This comprehensive resource is ideal for marine engineers, engine manufacturers and consultants dealing with the development and implementation of aftertreatment systems in marine engines. Includes recent advances and future trends of marine engines Discusses new and innovative emission technologies for marine diesel engines and their regulations Covers aftertreatment technologies that are not widely applied, such as catalysts, SCR, DPF and plasmas
Download or read book The Effects of Cooled Exhaust Gas Recirculation on a High speed Direct Injected Diesel Engine written by Rachel A. Snow and published by . This book was released on 2001 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Exhaust Gas Recirculation on Performance and Emissions from an Advanced Injection Low Pilot Ignited Natural Gas Engine written by Yongli Qi and published by . This book was released on 2005 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biofuels in Brazil written by Silvio Silvério da Silva and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the commercialization of biofuels and the Brazilian government policies for the promotion of renewable energy program in Brazil, which could be a learning module for several countries for implementing biofuels policy to improve their socioeconomic status and make them energy independent. Researchers in academia and industries, policy makers, and economic analysts will be assisted by important source of information in their ongoing research and future perspectives. This book will benefit graduate and postgraduate students of chemical and biochemical engineering, forestry, microbiology, biochemistry, biotechnology, applied chemistry, environmental science, sustainable energy, and biotech business disciplines by signifying the applied aspects of bioenergy production from various natural sources and their implications. Graduate and postgraduate students as well as postdoctoral researchers will find clear concepts of feedstock analysis, feedstock degradation, microbial fermentation, genetic engineering, renewable energy generation and storage, climate changes, and techno-economic analysis of biofuels production technologies.
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
