Download or read book Effect of Conventional Plasma Charging Damage on High K Gate Stack and Improvement in Neutral Beam Technology written by 曾思齊 and published by . This book was released on 2018 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Charging Damage written by Kin P. Cheung and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 50 years since the invention of transistor, silicon integrated circuit (IC) technology has made astonishing advances. A key factor that makes these advances possible is the ability to have precise control on material properties and physical dimensions. The introduction of plasma processing in pattern transfer and in thin film deposition is a critical enabling advance among other things. In state of the art silicon Ie manufacturing process, plasma is used in more than 20 different critical steps. Plasma is sometimes called the fourth state of matter (other than gas, liquid and solid). It is a mixture of ions (positive and negative), electrons and neutrals in a quasi-neutral gaseous steady state very far from equilibrium, sustained by an energy source that balances the loss of charged particles. It is a very harsh environment for the delicate ICs. Highly energetic particles such as ions, electrons and photons bombard the surface of the wafer continuously. These bombardments can cause all kinds of damage to the silicon devices that make up the integrated circuits.
Download or read book Physics and Technology of High k Gate Dielectrics 4 written by Samares Kar and published by The Electrochemical Society. This book was released on 2006 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue covers, in detail, all aspects of the physics and the technology of high dielectric constant gate stacks, including high mobility substrates, high dielectric constant materials, processing, metals for gate electrodes, interfaces, physical, chemical, and electrical characterization, gate stack reliability, and DRAM and non-volatile memories.
Download or read book Plasma Process induced Charging Damage on Thin Gate Oxides written by Donggun Park and published by . This book was released on 1998 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxide Charging Damage in Integrated Circuit Processing Investigated with a Coupled Plasma IC Device Model written by William George En and published by . This book was released on 1996 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Detection of and Protection Against Plasma Charging Damage in Modern Ic Technology written by Zhichun Wang and published by . This book was released on 2004 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Role of Ions in Charging Damage During High Density Plasma Etching written by Tsitsi Grace Madziwa-Nussinov and published by . This book was released on 2003 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Atomic Layer Deposition for Semiconductors written by Cheol Seong Hwang and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering thorough coverage of atomic layer deposition (ALD), this book moves from basic chemistry of ALD and modeling of processes to examine ALD in memory, logic devices and machines. Reviews history, operating principles and ALD processes for each device.
Download or read book High k Gate Dielectric Materials written by Niladri Pratap Maity and published by CRC Press. This book was released on 2020-12-18 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores and addresses the challenges of high-k gate dielectric materials, one of the major concerns in the evolving semiconductor industry and the International Technology Roadmap for Semiconductors (ITRS). The application of high-k gate dielectric materials is a promising strategy that allows further miniaturization of microelectronic components. This book presents a broad review of SiO2 materials, including a brief historical note of Moore’s law, followed by reliability issues of the SiO2 based MOS transistor. It goes on to discuss the transition of gate dielectrics with an EOT ~ 1 nm and a selection of high-k materials. A review of the various deposition techniques of different high-k films is also discussed. High-k dielectrics theories (quantum tunneling effects and interface engineering theory) and applications of different novel MOSFET structures, like tunneling FET, are also covered in this book. The volume also looks at the important issues in the future of CMOS technology and presents an analysis of interface charge densities with the high-k material tantalum pentoxide. The issue of CMOS VLSI technology with the high-k gate dielectric materials is covered as is the advanced MOSFET structure, with its working structure and modeling. This timely volume will prove to be a valuable resource on both the fundamentals and the successful integration of high-k dielectric materials in future IC technology.
Download or read book High k Gate Dielectrics written by Michel Houssa and published by CRC Press. This book was released on 2003-12-01 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive toward smaller and smaller electronic componentry has huge implications for the materials currently being used. As quantum mechanical effects begin to dominate, conventional materials will be unable to function at scales much smaller than those in current use. For this reason, new materials with higher electrical permittivity will be requ
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1970-06 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Download or read book Carrier mobility in advanced channel materials using alternative gate dielectrics written by Eylem Durgun Özben and published by Forschungszentrum Jülich. This book was released on 2014-03-20 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Chemical Mechanical Planarization CMP written by Babu Suryadevara and published by Woodhead Publishing. This book was released on 2021-09-10 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Chemical Mechanical Planarization (CMP), Second Edition provides the latest information on a mainstream process that is critical for high-volume, high-yield semiconductor manufacturing, and even more so as device dimensions continue to shrink. The second edition includes the recent advances of CMP and its emerging materials, methods, and applications, including coverage of post-CMP cleaning challenges and tribology of CMP. This important book offers a systematic review of fundamentals and advances in the area. Part one covers CMP of dielectric and metal films, with chapters focusing on the use of current and emerging techniques and processes and on CMP of various materials, including ultra low-k materials and high-mobility channel materials, and ending with a chapter reviewing the environmental impacts of CMP processes. New content addressed includes CMP challenges with tungsten, cobalt, and ruthenium as interconnect and barrier films, consumables for ultralow topography and CMP for memory devices. Part two addresses consumables and process control for improved CMP and includes chapters on CMP pads, diamond disc pad conditioning, the use of FTIR spectroscopy for characterization of surface processes and approaches for defection characterization, mitigation, and reduction. Advances in Chemical Mechanical Planarization (CMP), Second Edition is an invaluable resource and key reference for materials scientists and engineers in academia and R&D. Reviews the most relevant techniques and processes for CMP of dielectric and metal films Includes chapters devoted to CMP for current and emerging materials Addresses consumables and process control for improved CMP, including post-CMP
Download or read book Semiconductor Laser Engineering Reliability and Diagnostics written by Peter W. Epperlein and published by John Wiley & Sons. This book was released on 2013-01-25 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference book provides a fully integrated novel approach to the development of high-power, single-transverse mode, edge-emitting diode lasers by addressing the complementary topics of device engineering, reliability engineering and device diagnostics in the same book, and thus closes the gap in the current book literature. Diode laser fundamentals are discussed, followed by an elaborate discussion of problem-oriented design guidelines and techniques, and by a systematic treatment of the origins of laser degradation and a thorough exploration of the engineering means to enhance the optical strength of the laser. Stability criteria of critical laser characteristics and key laser robustness factors are discussed along with clear design considerations in the context of reliability engineering approaches and models, and typical programs for reliability tests and laser product qualifications. Novel, advanced diagnostic methods are reviewed to discuss, for the first time in detail in book literature, performance- and reliability-impacting factors such as temperature, stress and material instabilities. Further key features include: practical design guidelines that consider also reliability related effects, key laser robustness factors, basic laser fabrication and packaging issues; detailed discussion of diagnostic investigations of diode lasers, the fundamentals of the applied approaches and techniques, many of them pioneered by the author to be fit-for-purpose and novel in the application; systematic insight into laser degradation modes such as catastrophic optical damage, and a wide range of technologies to increase the optical strength of diode lasers; coverage of basic concepts and techniques of laser reliability engineering with details on a standard commercial high power laser reliability test program. Semiconductor Laser Engineering, Reliability and Diagnostics reflects the extensive expertise of the author in the diode laser field both as a top scientific researcher as well as a key developer of high-power highly reliable devices. With invaluable practical advice, this new reference book is suited to practising researchers in diode laser technologies, and to postgraduate engineering students.
Download or read book Cold Plasma in Food and Agriculture written by NN Misra and published by Academic Press. This book was released on 2016-07-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold Plasma in Food and Agriculture: Fundamentals and Applications is an essential reference offering a broad perspective on a new, exciting, and growing field for the food industry. Written for researchers, industry personnel, and students interested in nonthermal food technology, this reference will lay the groundwork of plasma physics, chemistry, and technology, and their biological applications. Food scientists and food engineers interested in understanding the theory and application of nonthermal plasma for food will find this book valuable because it provides a roadmap for future developments in this emerging field. This reference is also useful for biologists, chemists, and physicists who wish to understand the fundamentals of plasma physics, chemistry, and technology and their biological interactions through applying novel plasma sources to food and other sensitive biomaterials. Examines the topic of cold plasma technology for food applications Demonstrates state-of-the-art developments in plasma technology and potential solutions to improve food safety and quality Presents a solid introduction for readers on the topics of plasma physics and chemistry that are required to understand biological applications for foods Serves as a roadmap for future developments for food scientists, food engineers, and biologists, chemists, and physicists working in this emerging field
