Download or read book Effect of Chromium Addition to the Low Temperature Hot Corrosion Resistance of Platinum Modified Aluminide Coatings written by Mark W. Dust and published by . This book was released on 1985 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine gas turbines face many adverse conditions such as reduced fuel quality and a salt environment which present the sulfur, chloride, and sulfates required to initiate and propagate hot corrosion. A particularly severe type of hot corrosion is low temperature hot corrosion (LTHC) encountered at the low temperatures (600-750 C) used for low power destroyer operations. Platinum-aluminides have demonstrated great success as protective coatings which delay the onset of high temperature hot corrosion attack (800-1000 C). Chromium is known to provide good LTHC resistance. The effect of chromium addition to platinum aluminide coatings was investigated using two different nickel base superalloys, IN-738 (16% Cr) and IN-100 (10% Cr). Keywords: Platinum Aluminide, Chromium Aluminide; Nickel base Superalloy; IN-738; In-100; Thesis.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1986 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Download or read book Elevated Temperature Coatings written by Narendra B. Dahotre and published by Minerals, Metals, & Materials Society. This book was released on 1996 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the processing and characterization of high temperature coatings with regard to engineering, physical, and chemical properties. Included are discussions regarding the synthesis of new and unconventional coating materials, various existing methods along with novel techniques for producing coatings, and the removal of coatings in compliance with environmental requirements.
Download or read book Paper written by and published by . This book was released on 1987 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the MRS International Meeting on Advanced Materials Composites Corrosion written by and published by . This book was released on 1989 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LaQue s Handbook of Marine Corrosion written by David A. Shifler and published by John Wiley & Sons. This book was released on 2022-07-13 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of LaQue's classic text on marine corrosion, providing fully updated control engineering practices and applications Extensively updated throughout, the second edition of La Que's Handbook of Marine Corrosion remains the standard single-source reference on the unique nature of seawater as a corrosive environment. Designed to help readers reduce operational and life cycle costs for materials in marine environments, this authoritative resource provides clear guidance on design, materials selection, and implementation of corrosion control engineering practices for materials in atmospheric, immersion, or wetted marine environments. Completely rewritten for the 21st century, this new edition reflects current environmental regulations, best practices, materials, and processes, with special emphasis placed on the engineering, behavior, and practical applications of materials. Divided into three parts, the book first explains the fundamentals of corrosion in marine environments, including atmospheric corrosion, erosion, microbiological corrosion, fatigue, environmental cracking, and cathodic delamination. The second part discusses corrosion control methods and materials selection that can mitigate or eliminate corrosion in different marine environments. The third section provides the reader with specific applications of corrosion engineering to structures, systems, or components that exist in marine environments. This much-needed new edition: Presents a comprehensive and up-to-date account of the science and engineering aspects of marine corrosion Focuses on engineering aspects, descriptive behavior, and practical applications of materials usage in marine environments Addresses the various materials used in marine environments, including metals, polymers, alloys, coatings, and composites Incorporates current regulations, standards, and recommended practices of numerous organizations such as ASTM International, the US Navy, the American Bureau of Shipping, the International Organization for Standardization, and the International Maritime Organization Written in a clear and understandable style, La Que's Handbook of Marine Corrosion, Second Edition is an indispensable resource for engineers and materials scientists in disciplines spanning the naval, maritime, commercial, shipping industries, particularly corrosion engineers, ship designers, naval architects, marine engineers, oceanographers, and other professionals involved with products that operate in marine environments.
Download or read book Extended Abstracts written by Electrochemical Society and published by . This book was released on 1983 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Mechanisms and Life Assessment of High Temperature Components written by Ramaswamy Viswanathan and published by ASM International. This book was released on 1989 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coatings and Bimetallics for Aggressive Environments written by Richard D. Sisson and published by . This book was released on 1985 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal de Physique written by and published by . This book was released on 1991 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Actes Du Colloque International Sur la Corrosion Et la Protection Des Mat riaux Haute Temp rature written by and published by . This book was released on 1993 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government reports annual index written by and published by . This book was released on 199? with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index Keyword A L written by and published by . This book was released on 1986 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloys Index written by and published by . This book was released on 1990 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
