Download or read book New Techniques for Future Accelerators III written by G. Torelli and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fundamental step towards gaining a deeper understanding of our world is to increase the resolution of the investigative instruments we use; i.e. to increase the energy, and hence to decrease the wavelength, of the particles which constitute our probes. Almost any substantial progress in our understanding of the fundamental laws of Nature has been obtained when a new generation of accelerators has allowed us to achieve a new energy range. The new results have generated new questions, thus encouraging us to construct new machines to reach even higher energy levels. The relative energy gain from one generation of accelerators to the next is progressively increasing. The energy ga in suggested by the theoretical predictions at the time has usually been much greater than the value allowed by our technical capabilities. But this smaller energy gain permitted by accelerator technology improvement has generally been sufficient up until now to bring about a substantial increase in our knowledge. Hence a large increase in accelerator energy is very important, and we know that this result can essentially be obtained by developing some new device or some new approach.

Download or read book Field Computation for Accelerator Magnets written by Stephan Russenschuck and published by John Wiley & Sons. This book was released on 2011-02-08 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leading expert on the electromagnetic design and engineering of superconducting accelerator magnets, this book offers the most comprehensive treatment of the subject to date. In concise and easy-to-read style, the author lays out both the mathematical basis for analytical and numerical field computation and their application to magnet design and manufacture. Of special interest is the presentation of a software-based design process that has been applied to the entire production cycle of accelerator magnets from the concept phase to field optimization, production follow-up, and hardware commissioning. Included topics: Technological challenges for the Large Hadron Collider at CERN Algebraic structures and vector fields Classical vector analysis Foundations of analytical field computation Fields and Potentials of line currents Harmonic fields The conceptual design of iron- and coil-dominated magnets Solenoids Complex analysis methods for magnet design Elementary beam optics and magnet polarities Numerical field calculation using finite- and boundary-elements Mesh generation Time transient effects in superconducting magnets, including superconductor magnetization and cable eddy-currents Quench simulation and magnet protection Mathematical optimization techniques using genetic and deterministic algorithms Practical experience from the electromagnetic design of the LHC magnets illustrates the analytical and numerical concepts, emphasizing the relevance of the presented methods to a great many applications in electrical engineering. The result is an indispensable guide for high-energy physicists, electrical engineers, materials scientists, applied mathematicians, and systems engineers.

Download or read book Mathematical Models for the Design of Electrical Machines written by Frédéric Dubas and published by MDPI. This book was released on 2021-03-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive set of articles reflecting the latest advances and developments in mathematical modeling and the design of electrical machines for different applications. The main models discussed are based on the: i) Maxwell–Fourier method (i.e., the formal resolution of Maxwell’s equations by using the separation of variables method and the Fourier’s series in 2-D or 3-D with a quasi-Cartesian or polar coordinate system); ii) electrical, thermal and magnetic equivalent circuit; iii) hybrid model. In these different papers, the numerical method and the experimental tests have been used as comparisons or validations.

Download or read book Frontiers Of Accelerator Technology Proceedings Of The Joint Us cern japan International School written by Melvin Month and published by World Scientific. This book was released on 1996-10-25 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the Topical course on Frontiers of Accelerator Technology, jointly organized by the CERN Accelerator School, the KEK Accelerator School and the US Particle Accelerator School. It was held at Maui, Hawaii, November 3-9, 1994. The purpose was to disseminate knowledge on the latest ideas and developments in the technology of particle accelerators by bringing together world known experts and younger scientists in the field. It was intended for individuals with professional interest in accelerator physics and technology, for graduate students, for post-docs and for those working in accelerator-based sciences.The motivation to conceive and build accelerators comes from a most fundamental need of man — to understand and control the world around us. With beams and their associated accelerators, scientists and engineers can gain understanding of the nature of matter and modify matter not possible by other means. Areas already influenced by the developments in accelerator technology are high energy and nuclear physics, atomic and molecular physics, condensed matter physics and the biological sciences. There is also a growing number of applications in medicine and industry. The program was as follows: lectures in superconductivity, magnets, RF, feedback, instrumentation, high power sources, beam stability and novel accelerator techniques; seminars on accelerator applications, the role of government and industry, and perspectives on future technology; round table: the high energy accelerator frontier; four short courses, each including 8 hours of lectures, problems and tutorials on superconducting magnets, superconducting rf, instrumentation and linacs.This book aims to summarize all the currently available knowledge on the technology driving the development of particle beams for science, medicine, and industry. It is the most up-to-date and unique collection of information on this technology presently available.

Download or read book Superconducting Accelerator Magnets written by K.-H. Mess and published by World Scientific. This book was released on 1996 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.

Download or read book Electromagnetic Methods in Applied Geophysics written by Misac N. Nabighian and published by SEG Books. This book was released on 1988 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a slag heap, the result of strip mining, creeps closer to his house in the Ohio hills, fifteen-year-old M. C. is torn between trying to get his family away and fighting for the home they love.

Download or read book Issues in General Physics Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 13957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in General Physics Research / 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about General Physics Research. The editors have built Issues in General Physics Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about General Physics Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in General Physics Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Handbook Of Accelerator Physics And Engineering Third Edition written by Alexander Wu Chao and published by World Scientific. This book was released on 2023-02-02 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing many new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to common formulae of previous compilations, hard to find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world's most able practioners of the art and science of accelerators.The seven chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities due to the various interactions mentioned. A chapter on operational considerations including discussions on the assessment and correction of orbit and optics errors, realtime feedbacks, generation of short photon pulses, bunch compression, phase-space exchange, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cryogenic vacuum systems, steady state microbuching, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes, machine learning, multiple frequency rf systems, FEL seeding, ultrafast electron diffraction, and Gamma Factory. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement, including undulators, and acceleration (both normal and superconducting) receive detailed treatment in a sub-systems chapter, beam measurement and apparatus being treated therein as well.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.

Download or read book Electromagnetic Fields in Biological Systems written by James C. Lin and published by CRC Press. This book was released on 2016-04-19 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spanning static fields to terahertz waves, this volume explores the range of consequences electromagnetic fields have on the human body. Topics discussed include essential interactions and field coupling phenomena; electric field interactions in cells, focusing on ultrashort, pulsed high-intensity fields; dosimetry or coupling of ELF fields into biological systems; and the historical developments and recent trends in numerical dosimetry. It also discusses mobile communication devices and the dosimetry of RF radiation into the human body, exposure and dosimetry associated with MRI and spectroscopy, and available data on the interaction of terahertz radiation with biological tissues, cells, organelles, and molecules.

Download or read book Modern Electrodynamics written by Andrew Zangwill and published by Cambridge University Press. This book was released on 2013 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: An engaging writing style and a strong focus on the physics make this graduate-level textbook a must-have for electromagnetism students.

Download or read book EPAC 90 written by P. Marin and published by Atlantica Séguier Frontières. This book was released on 1990 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boundary Elements and Other Mesh Reduction Methods XXXVII written by C.A. Brebbia and published by WIT Press. This book was released on 2014-09-08 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1978 the conference on Boundary Elements and Mesh Reduction Methods has produced a successful series of volumes in which all major developments in the field have been presented. The 37th volume in the series continues this success by bringing together the latest advanced research carried out by different groups around the world. The included papers cover topics such as: Advanced meshless and mesh reduction methods; Advanced formulations; Computational methods; Stochastic modelling; Emerging applications; Solid mechanics applications; Dynamics and vibrations; Damage mechanics and fracture; Material characterisation; Fluid flow modelling; Electrical engineering and electromagnetics; Heat and mass transfer.

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1860 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Eddy Current Canonical Problems with Applications to Nondestructive Evaluation written by Theodoros P. Theodoulidis and published by . This book was released on 2006 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EPAC 92 written by H. Henke and published by Atlantica Séguier Frontières. This book was released on 1992 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-01-25 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume One, Process Fundamentals provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics

Download or read book Waves and Optics written by Harish Parthasarathy and published by CRC Press. This book was released on 2021-02-07 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of waves and optics ranging from one dimensional waves in a vibrating string, two dimensional waves in a vibrating membrane, both of which are transverse, three dimensional electromagnetic waves generated by radiating antennas and longitudinal sound/pressure waves in an air column. Note: T&F does not sell or distribute the Hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka.