Download or read book Economics of Composites written by Carroll G Grant and published by SAE International. This book was released on 2015-09-17 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential information captures the state of the composites industry to assist engineering/technical professionals in charting a course for achieving economic success. The material characteristics of composites, their applications, and complex composites manufacturing processes depend on many factors. These are all fully considered and presented to meet the challenges that face this marketplace. The expert panel of writers from various industry segments (i.e., commercial/military aerospace, wind energy, automotive, and bicycle industries) address fundamental topics and explore the affordability of composites from raw material to end-of life-disposal costs with skilled perspectives that include: • Material characteristics and economics of composite structure • Complex manufacturing and specifics of assembly methods • Applications for composites • Product and human health • Safety and environmental impacts The authors provide strong basic economics concepts that are directly applied to the composites industry. The content conveys both the reality of the industry, as well as the trends and constantly emerging challenges that impact the cost of composites and are necessary for return on investment, as well as enabling the full potential of composites.
Download or read book Economics of Composites written by Carroll G Grant and published by SAE International. This book was released on 2015-09-17 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential information captures the state of the composites industry to assist engineering/technical professionals in charting a course for achieving economic success. The material characteristics of composites, their applications, and complex composites manufacturing processes depend on many factors. These are all fully considered and presented to meet the challenges that face this marketplace. The expert panel of writers from various industry segments (i.e., commercial/military aerospace, wind energy, automotive, and bicycle industries) address fundamental topics and explore the affordability of composites from raw material to end-of life-disposal costs with skilled perspectives that include: • Material characteristics and economics of composite structure • Complex manufacturing and specifics of assembly methods • Applications for composites • Product and human health • Safety and environmental impacts The authors provide strong basic economics concepts that are directly applied to the composites industry. The content conveys both the reality of the industry, as well as the trends and constantly emerging challenges that impact the cost of composites and are necessary for return on investment, as well as enabling the full potential of composites.
Download or read book Handbook on Constructing Composite Indicators Methodology and User Guide written by OECD and published by OECD Publishing. This book was released on 2008-08-22 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide for constructing and using composite indicators for policy makers, academics, the media and other interested parties. In particular, this handbook is concerned with indicators which compare and rank country performance.
Download or read book Economics of Composite Material Manufacturing Equipment written by Anjali Goel and published by . This book was released on 2000 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Composites II written by Robert C. Creese and published by CRC Press. This book was released on 2020-07-25 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on polymer conferences held in 1999 and 2001, Polymer Composites II: Composites Applications in Infrastructure Renewal and Economic Development is a collection of status reports, success stories, and new opportunities from specific composite applications in infrastructure renewal that provide insight to the resulting economic development and effects. This volume brings together multidisciplinary experts involved with polymer composites who validate their design, construction, and performance and present the role that composites play in infrastructure renewal, detail the technical and regualtory barriers, identify helpful agencies, and estimate the possibilities of economic development.
Download or read book Revolutionary Materials written by Sampe and published by CRC Press. This book was released on 2000-11-06 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economics of Composite Material Manufacturing Equipment written by and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: By Anjali Goel.
Download or read book Advances in Composites Manufacturing and Process Design written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2015-07-29 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes. - Outlines the advances in the different methods of composite manufacturing processes - Provides extensive information on the thermo-mechanical behavior of reinforcements and composite prepregs - Reviews numerical simulations of forming and flow processes, as well as pultrusion processes and modeling chemical vapor infiltration
Download or read book An Introduction to Automotive Composites written by Nick Tucker and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an upb306d and expanded version of the course notes for the Composite Awareness course run by the Warwick Manufacturing Group in 1998-1999. The book gives readers an appreciation of composites, materials properties, manufacturing technologies and the wider implications of using composites in the automotive sector. It will be useful for those already working with composites in automotive applications and for those who are considering using them in the future.
Download or read book Principles of the Manufacturing of Composite Materials written by Suong V. Hoa and published by DEStech Publications, Inc. This book was released on 2009 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on 15 years of composites manufacturing instruction, the Principles of the Manufacturing of Composite Materials is the first text to offer both a practical and analytic approach to composite manufacturing processes. It ties together key tools for analyzing the mechanics of composites with the processes whereby composite products are fabricated, whether by hand lay-up or through automated processes. The book outlines the principles of chemistry, physics, materials science and engineering and shows how these are connected to the design and production of a variety of composites, primarily polymeric. It thus provides analytic, quantitative tools to answer the questions of why certain materials are linked with specific processes, and why products are manufactured by one process rather than another. All phases of matrix material formation are explained, as are practical design details for fabrics, autoclaving, filament winding, pultrusion, liquid composite molding, hand techniques, joints and joint bonding, and more. A special section is devoted to nanocomposites. The book includes exercises for university students and practitioners.
Download or read book Commercialization of New Materials for a Global Economy written by National Research Council and published by National Academies Press. This book was released on 1993-02-01 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials are important in the pursuit of virtually every human endeavor. Advances in materials are applied not only in advanced technological systems such as spacecraft, jet engines, computers, and telecommunications but also in a world of more familiar applications from automobiles to floor coverings to fishing rods. This book addresses the factors that impede the transition of new materials from concepts into commercial use. It identifies policies and actions that government and industry, together with universities, can take to remove these impediments. Incentives to accelerate the commercialization of advanced materials are suggested, and recommendations are presented on ways to stimulate competitive commercialization of materials by government, industry, and academia.
Download or read book Systemic Circular Economy Solutions for Fiber Reinforced Composites written by Marcello Colledani and published by Springer Nature. This book was released on 2022 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides an overview of the work undertaken within the FiberEUse project, which developed solutions enhancing the profitability of composite recycling and reuse in value-added products, with a cross-sectorial approach. Glass and carbon fiber reinforced polymers, or composites, are increasingly used as structural materials in many manufacturing sectors like transport, constructions and energy due to their better lightweight and corrosion resistance compared to metals. However, composite recycling is still a challenge since no significant added value in the recycling and reprocessing of composites is demonstrated. FiberEUse developed innovative solutions and business models towards sustainable Circular Economy solutions for post-use composite-made products. Three strategies are presented, namely mechanical recycling of short fibers, thermal recycling of long fibers and modular car parts design for sustainable disassembly and remanufacturing. The validation of the FiberEUse approach within eight industrial demonstrators shows the potentials towards new Circular Economy value-chains for composite materials.
Download or read book Thermoplastics and Thermoplastic Composites written by Michel Biron and published by William Andrew. This book was released on 2012-11-12 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the technology and business aspects of thermoplastics, providing a guide designed for engineers working in real-world industrial settings. The author explores the criteria for material selection, provides a detailed guide to each family of thermoplastics, and also explains the various processing options for each material type. More than 30 families of thermoplastics are described with information on their advantages and drawbacks, special grades, prices, transformation processes, applications, thermal behaviour, technological properties (tenacity, friction, dimensional stability), durability (ageing, creep, fatigue), chemical and fire behaviour, electrical properties, and joining possibilities. Biron explores the technological properties and economics of the major thermoplastics and reinforced thermoplastics, such as polyethylene, and emerging polymers such as polybenzimidazole, Thermoplastic Elastomers (TPEs) and bioplastics. In the second edition, a new section 'plastics solutions for practical problems' provides over 25 case studies illustrating a wide range of design and production challenges across the spectrum of thermoplastics, from metal and glass replacement solutions, to fire retardant plastics and antimicrobials. In addition, Biron provides major new material on bioplastics and wood plastic composites (WPCs), and fully updated data throughout. Combining materials data, information on processing techniques, and economic aspects (pricing), Biron provides a unique end-to-end approach to the selection and use of materials in the plastics industry and related sectors Includes a new section of case studies, illustrating best practice across a wide range of applications and industry sectors New material on bioplastics and sustainable composites
Download or read book Designing with Reinforced Composites written by Dominick V. Rosato and published by . This book was released on 1997-01-01 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Matrix Composites Materials Usage Design and Analysis written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2012-07-10 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third volume of this six-volume compendium provides methodologies and lessons learned for the design, analysis, manufacture, and field support of fiber-reinforced, polymeric-matrix composite structures. It also provides guidance on material and process specifications and procedures for using the data that is presented in Volume 2. The information provided is consistent with the guidance provided in Volume 1, and is an extensive compilation of the current knowledge and experiences of engineers and scientists from industry, government, and academia who are active in composites. The Composite Materials Handbook, referred to by industry groups as CMH-17, is a six-volume engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design and fabricate end items from composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair. The primary purpose of the handbook is to standardize engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials.
Download or read book Composite Materials written by S. C. Sharma and published by Alpha Science Int'l Ltd.. This book was released on 2000 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering coverage of all features of compoiste materials and concepts of compoiste technology, this book elucidates the subject well.
Download or read book Thermosets and Composites written by Michel Biron and published by Elsevier. This book was released on 2003-12-18 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: • A succinct source of information for designers and manufacturers.• A decision-making tool for those who need a quick and pragmatic account of thermosets and composites.• A synoptic account of the techno-economics and properties of all the commonly-used thermosets and composites.Designers and manufacturers using thermosets and composites, or those intending to do so, often need a succinct source of information on the economics and properties of these materials. This book provides a synoptic approach.It covers the economic importance of thermosets and composites, a comparison of the properties of the various thermoset categories, monographs on the nine principal families of thermosets, polymer composites and emergent materials and processes. Will enable readers to make informed decisions leading to well designed and made products.
