Download or read book Economic and Technical Aspects of the Cold Extrusion of Steel written by Institute of Sheet Metal Engineering. Cold Extrusion Group and published by . This book was released on 1967 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Some Aspects of the Cold Extrusion of Steel written by Plasticity Division of NEL. and published by . This book was released on 1965 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact and Cold Extrusion of Metals written by John Laurence Everhart and published by . This book was released on 1964 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONTENTS - 1. INTRODUCTION - PART 1: THE PROCESS - 2. FUNDAMENTALS OF IMPACT EXTRUSION - 3. EXTRUSION PRESSURE - 4. TOOLING FOR IMPACT EXTRUSION - 5. MATERIALS FOR TOOLS - 6. LUBRICATION - 7. HIGH ENERGY RATE FORMING - PART 2: THE PRODUCT - 8. FACTORS IN DESIGN - 9. ALUMINUM AND ALUMINUM ALLOYS - 10. LEAD, TIN, COLLAPSIBLE TUBES - 11. OTHER NONFERROUS METALS - 12. FERROUS METALS - BIBLIOGRAPHY - INDEX - Excerpt from Book (short): Preface - The impact or cold extrusion of metals is a "chipless machining" process that can greatly reduce costs of material and labor if properly applied. Within certain limitations in shape, some parts can be produced by this process that often require only trimming to length. On others, the secondary operations are reduced greatly over those required for several of the competing processes. Finally, certain components can be made that can be produced by no other method. Impact extrusion can be employed for the production of parts from a wide range of metallic materials. In commercial production at present are components produced from aluminum, copper, lead, magnesium, tin, zinc and their alloys and various steels. In the development stage are parts produced from less common metals, such as titanium and molybdenum. The aim of this book is to present a coordinated description of impact extrusion. Its purpose is to present the information required by an engineer to determine whether the process is applicable to his products, and to assist the metallurgist in selecting the metal to be used. The book is based on personal experience, talks, and correspondence with producers of components, and a search of the free-world technical literature. It is divided into two parts. The first deals with the underlying principles and the characteristics of the process; the second, with the metals being extruded and the products.
Download or read book Some Aspects of the Cold Extrusion of Steel written by National Engineering Laboratory (Great Britain). Plasticity Division and published by . This book was released on 1965 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Extrusion of Steel written by Royal Empire Society (Great Britain) and published by . This book was released on 1953 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact cold Extrusion of Steel written by and published by . This book was released on 1956 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Analysis of Cold Extrusion of Steel written by Gilbert Mark Lehmann and published by . This book was released on 1957 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sheet Metal Industries written by and published by . This book was released on 1988 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Treatment and Drop Forging written by and published by . This book was released on 1969 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Translations written by and published by . This book was released on 1960 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The ECPH Encyclopedia of Mining and Metallurgy written by Xu Kuangdi and published by Springer Nature. This book was released on with total page 2429 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extrusion written by Kurt Laue and published by ASM International(OH). This book was released on 1981 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The economic importance of extrusion has increased markedly in the years, primarily because of spectacular technological advances that have drawn on both practical experience and fundamental research and that have elaborated on extrusion processes, tooling, and metal flow. Expert information of diffusion is itself diffuse, spread over an array of international technical journals and proprietary reports and presented in several languages. This book, written by acknowledged authorities and originally published in the German language, succeeds in providing a comprehensive and detailed treatment of all aspects of extrusion, with special emphasis on the latest advanced technology. Among the extruded metals covered are aluminium, lead, tin, magnesium, zinc, copper. titanium, zirconium, beryllium, uranium, nickel, and steel. Processes discussed include direct and indirect extrusion, cable sheathing by extrusion, hydrostatic extrusion, cladding by extrusion and special technology for extruding various metals. Also discussed are stresses in extrusion, economic aspects, and future developments.
Download or read book Metal Shaping Processes written by Vukota Boljanovic and published by Industrial Press Inc.. This book was released on 2009 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the only comprehensive text focusing on metal shaping processes, which are still the most widely used processes in the manufacture of products and structures, Metal Shaping Processes carefully presents the fundamentals of metal shaping processes with their relevant applications. The treatment of the subject matter is adequately descriptive for those unfamiliar with the various processes and yet is sufficiently analytical for an introductory academic course in manufacturing. The text, as well as the numerous formulas and illustrations in each chapter, clearly show that shaping processes, as a part of manufacturing engineering, are a complex and interdisciplinary subject. The topics are organized and presented in such a manner that they motivate and challenge students to present technically and economically viable solutions to a wide variety of questions and problems, including product design. It is the perfect textbook for students in mechanical, industrial, and manufacturing engineering programs at both the Associate Degree and Bachelor Degree programs, as well a valuable reference for manufacturing engineers (those who design, execute and maintain the equipment and tools); process engineers (those who plan and engineer the manufacturing steps, equipment, and tooling needed in production); manufacturing managers and supervisors; product design engineers; and maintenance and reliability managers and technicians. Each chapter begins with a brief highlighted outline of the topics to be described. Carefully presents the fundamentals of the particular metal-shaping process with its relevant applications within each chapter, so that the student and teacher can clearly assess the capabilities, limitation, and potentials of the process and its competitive aspects. Features sections on product design considerations, which present guidelines on design for manufacturing in many of the chapters. Offers practical, understandable explanations, even for complex processes. Includes text entries that are coded as in an outline, with these numerical designations carried over the 320 related illustrations for easy cross-referencing. Provides a dual (ISO and USA) unit system. Contains end-of-chapter Review Questions. Includes a chapter on sheet metalworking covering cutting processes; bending process; tubes and pipe bending; deep drawing processes; other sheet metal forming process (stretch forming, spinning, rubber forming, and superplatic forming and diffusion bonding). Provides a useful die classification with 15 illustrations and description; presses for sheet metalworking; and high energy-rate forming processes. A chapter on nontraditional manufacturing process discusses such important processes as mechanical energy processes (ultrasonic machining, water jet cutting); electrochemical machining processes (electrochemical machining, electrochemical grinding); thermal energy processes (electric discharge processes, laser beam machining, electron beam machining); and chemical processes (chemical milling).
Download or read book Economics of Cold Extrusion written by B. P. Clapp and published by . This book was released on 1965 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Forging of Steel written by Heinz D. Feldmann and published by . This book was released on 1962 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Extrusion of Steel written by Heinz Eberspacher and published by . This book was released on 1959* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Data Digest written by and published by . This book was released on 1950 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
