Download or read book Economic and Multiattribute Evaluation of Advanced Manufacturing Systems written by John R. Canada and published by Prentice Hall. This book was released on 1989 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Economics of Advanced Manufacturing Systems written by Hamid R. Parsaei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1980s have witnessed a tremendous growth in the field of computer integrated manufacturing systems. The other major areas of development have been computer-aided design, computer-aided manufacturing, industrial robotics, automated assembly, cellular and modular material handling, computer networking and office automation to name just a few. These new technologies are generally capital intensive and do not conform to traditional cost structures. The net result is a tremendous change in the way costs should be estimated and economic analyses performed. The majority of existing engineering economy texts still profess application of traditional analysis methods. But, as was men tioned above, it is clear that the basic trend in manufacturing industries is itself changing. So it is quite obvious that the practice of traditional economic analysis methods should change too. This book is an attempt to address the various issues associated with non-traditional methods for evaluation of advanced computer-integrated technologies. This volume consists of twenty refereed articles which are grouped into five parts. Part one, Economic Justification Methods, consists of six articles. In the first paper, Soni et at. present a new classification for economic justification methods for advanced automated manufacturing systems. In the second, Henghold and LeClair look at strengths and weaknesses of expert systems in general and more specifically, an ap plication aimed at investment justification in advanced technology. The third paper, by Carrasco and Lee, proposes an enhanced economic methodology to improve the needs analysis, conceptual design and de tailed design activities associated with technology modernization.
Download or read book Selection and Evaluation of Advanced Manufacturing Technologies written by Matthew J. Liberatore and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matthew J. Liberatore Department of Management Villanova University Villanova, PA 19085 1. BACKGROUND The weakening competitive position of many segments of u.s. manufacturing has been analyzed, debated and discussed in corporate boardrooms, academic journals and the popular literature. One result has been a renewed commitment toward improving productivity and quality in the workplace. The drive to reduce manufacturing related costs, while meeting ever-changing customer needs, has led many firms to consider more automated and flexible manufacturing systems. The extent to which these new technologies can support business goals in productivity, quality and flexibility is an especially important issue for manufacturing firms in the u.s. and other Western nations. Problems have arisen in developing performance measures and evaluation criteria which reflect the full range of costs and benefits associated with these technologies. Some would argue that managerial policies and attitudes, and not the shortcomings of the equipment or manufacturing processes, are the major impediments to implementation (Kaplan 1984).
Download or read book Engineering for Business written by Colin O. Benjamin and published by University Press of America. This book was released on 2009-05-16 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering for Business features teaching materials and case studies developed for senior undergraduate courses in engineering and business and graduate-level classes in Engineering Management, Industrial Engineering and Management, and Technology Management. This work surveys the more robust quantitative tools and techniques used to facilitate decision-making in business and uses case studies to illustrate their application. Where appropriate, the readers are provided with frameworks to enable application of the techniques covered and are directed to commercially available software developed to facilitate the deployment of these tools and techniques. Traditional industrial engineering and engineering management techniques related to Engineering Economy, Multi-Criteria Decision-making, Project Management, Management Science, and Facilities Planning are covered. These are complemented by a review of more topical areas, such as Applications Software for Business, Technology Commercialization, and Supply Chain Management. In all areas, the emphasis is on integrating theory and practice through the use of case studies based on projects conducted in a wide range of industry settings. Engineering for Business provides a robust framework for the explicit integration of engineering tools and techniques into a business curriculum. The case studies are rich in data and provide great opportunities for students to apply the techniques covered and to propose innovative solutions to open-ended project assignments.
Download or read book Economic and Financial Justification of Advanced Manufacturing Technologies written by Hamid R. Parsaei and published by Elsevier. This book was released on 2013-10-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Competence in investment analysis is now a basic requirement for most practicing managers, engineers, and financial analysts in order to avoid possible serious mistakes arising from flawed or inadequate knowledge of the discipline. Furthermore, individuals who make decisions based on technical economics stake their professional futures, in many cases, on the accuracy of such evaluations. The aim of this volume is to provide a balanced view of the essential components of economic and financial analysis including: 1. Strategic and design issues; 2. Principles of cost management systems and activity-based costing, and; 3. Tools for developing the financial measures of investment worth, with advanced topics and case studies in these three areas.This volume provides a refreshing insight into the various methods that engineers, managers, and financial analysts may need to consider to find good alternatives for the investment of scarce resources. Not only are new ventures presented, but also improvements within existing facilities that include process modification, product design, equipment replacement, and plant expansion/contraction.
Download or read book Advanced Manufacturing Systems written by Joseph Sarkis and published by CRC Press. This book was released on 1999-08-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as a reference and guide to both practitioners and researchers involved in the planning, control, and management of advanced manufacturing systems, Advanced Manufacturing Systems: Strategic Management and Implementation offers information on a wide range of available methodologies and tools. The contents are organized into four parts: Global Strategic Issues; Evaluation, Selection, and Adoption of the Systems; Implementation Issues; and Control and Support. Theoretical and practical, analytical and empirical, this is a valuable resource for those interested in researching or implementing these systems into their organizations.
Download or read book Economic Evaluation of Advance Technologies written by Jerome P. Lavelle and published by CRC Press. This book was released on 2001-12-14 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text illuminates the contemporary issues and technologies related to the economic evaluation and justification of advanced technologies. Included are modern tools, as well as application-based cases that demonstrate the use of these tools. Students, researchers and decision makers will benefit from this useful resource.
Download or read book Selection and Evaluation of Advanced Manufacturing Technologies written by Matthew J. Liberatore and published by Springer. This book was released on 1990-06-29 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matthew J. Liberatore Department of Management Villanova University Villanova, PA 19085 1. BACKGROUND The weakening competitive position of many segments of u.s. manufacturing has been analyzed, debated and discussed in corporate boardrooms, academic journals and the popular literature. One result has been a renewed commitment toward improving productivity and quality in the workplace. The drive to reduce manufacturing related costs, while meeting ever-changing customer needs, has led many firms to consider more automated and flexible manufacturing systems. The extent to which these new technologies can support business goals in productivity, quality and flexibility is an especially important issue for manufacturing firms in the u.s. and other Western nations. Problems have arisen in developing performance measures and evaluation criteria which reflect the full range of costs and benefits associated with these technologies. Some would argue that managerial policies and attitudes, and not the shortcomings of the equipment or manufacturing processes, are the major impediments to implementation (Kaplan 1984).
Download or read book Manufacturing Decision Support Systems written by Hamid R. Parsaei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, a tremendous growth in the popularity and applications of computers in manufacturing has occurred. Computer aided design, computer-aided manufacturing, flexible manufacturing systems, group technology and many others are considered by many manufacturing executives as the most promising technologies and philosophies that, if successfully implemented, can reduce costs and enable the US manufacturing companies to become more competitive in the global market. In the computer-integrated manufacturing environ ment, the decision processes are often more involved. The decision makers are frequently required to have access to a vast amount of data to support and analyze their complex decision problems at strategic and tactical levels. Decision support systems are often referred to as computer-based information technologies that allow the decision makers to interactively communicate and solve the decision problems. Manufacturing Decision Support Systems is intended to report the latest developments and address the central issues in this area. This volume consists of 14 refereed chapters, written by leading researchers from academia and industry.
Download or read book Concurrent Engineering written by Andrew Kusiak and published by John Wiley & Sons. This book was released on 1993-01-12 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a top-down approach to the design, development, testing and recyclability of products, components and systems across a wide range of industries. Starting with the desired result and working back through the details, it shows how to produce goods, taking into account the challenges of actual manufacture, what the reliability requirements should be, quality control, associated costs, customer needs and more. Additional features include case studies and team negotiating. Also well-illustrated with figures, photographs, charts and tables and includes an extensive bibliography.
Download or read book The Selection Process for Capital Projects written by Hans J. Lang and published by John Wiley & Sons. This book was released on 1993-09-16 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews basic principles and presents techniques for evaluating and making decisions about investments and the acquisition of capital projects in industry and the private sector. Provides management and control techniques for construction of facilities or installation and operation of machinery and equipment. Covers sensitivity analysis and methods for ranking projects. Discusses the limitations of various methods. Explains how to carry out economic studies for the proper allocation of capital spending.
Download or read book Planning Design and Analysis of Cellular Manufacturing Systems written by A.K. Kamrani and published by Newnes. This book was released on 1995-04-11 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading researchers in the field of cellular manufacturing systems from academia and industry have contributed to this volume. The book aims to report the latest developments and address the central issues in the design and implementation of cellular manufacturing systems. Cellular Manufacturing (CM) is one of the major concepts used in the design of flexible manufacturing systems. CM, also known as group production or family programming, can be described as a manufacturing technique that produces families of parts within a single line or cell of machines. The first part of the book describes various techniques for design and modeling of cellular manufacturing systems. The second part is concerned with performance measure and analysis, followed by a section which presents the applications of artifical intelligence and computer tools in cellular manufacturing systems.
Download or read book Flexible Manufacturing Systems written by Horst Tempelmeier and published by John Wiley & Sons. This book was released on 1993-10-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now, this comprehensive and systematic overview of both the design models and quantitative solution methods for FMS support, configuration, and operation rectifies that problem. Students, production managers/planners, and FMS installation planners can now find everything they need in one authoritative and up-to-date source.
Download or read book Technology Assessment written by Tugrul U. Daim and published by Erich Schmidt Verlag GmbH & Co KG. This book was released on 2011 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Understanding the technology dynamics is a required capability in today's technology driven industries. This volume focuses on three areas: technology assessment, technology forecasting and technology diffusion. It shows: an introduction to different types of assessment methods and applications from different sectors including energy, healthcare and communications; technology forecasting and foresight and a review of conventional and emerging methods; and the diffusion of technologies by exploring adoption of products and services from different sectors."--Back cover.
Download or read book Concurrent Engineering In Product Design And Development written by I. Moustapha and published by New Age International. This book was released on 2006 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Is Written By A Group Of International Experts On Concurrent Product And Process Design And Development. It Reflects Modern Trends And Approaches In Concurrent Engineering, With Particular Emphasis On Product Development Cycle. A Multi-Disciplinary Approach Is Adopted Throughout The Book. The Book Highlights Concurrent Engineering Organization; Enabling Tools And Techniques For Successful Concurrent Engineering; Manufacturing Strategy Decision Support Tools; Measure Of Manufacturing Performance For Concurrent Engineering; Economic Justification In A Concurrent Engineering Environment; Product Data Requirements In Concurrent Engineering. All These Features Make This Book An Extremely Valuable Reference Source For Practising Professionals And Engineering Students. A Number Of Prominent Scientists And Experts From Different Countries Have Jointly Worked To Compile The Chapters Of This Book Reflecting The Latest Developments And Modern Approaches To Concurrent Engineering.
Download or read book Handbook of Flexible Manufacturing Systems written by Nand K. Jha and published by Academic Press. This book was released on 2012-12-02 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a compilation of the current practical knowledge of flexible manufacturing systems (FMS). FMS allow manufacturing plants of all sizes to reduce their inventory while increasing their ability to meet consumer demands. By controlling automatic guided vehicles, robots, and machine tools with one central computer, products can now be produced in a variety of styles and models all at the same time. FMS are designed to adapt quickly and economically to changes in requirements and to unpredictable events. This guide explains how to effectively employ these useful new systems. Includes specifications for software to implement simulation modeling Surveys practical applications in the workplace Presents materials in a step-by-step workbook style
Download or read book Information Technology Evaluation Methods and Management written by Wim Van Grembergen and published by IGI Global. This book was released on 2001-01-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evaluation of IT and its business value are the subject of many academic and business discussions. Investments in IT are growing extensively, and business managers worry about the fact that the benefits might not be as high as expected. This phenomenon is often called the IT investment paradox or the IT Black Hole: large sums are invested in IT that seem to be swallowed by a large black hole without rendering many returns. How to measure the benefits of IT is the concern of this book titled Information Technology Evaluation Methods and Management. The different IT evaluation approaches and methods are discussed and illustrated with cases: traditional financial evaluations such as the return on investment, information economics and the recently introduced IT Balanced Scorecard. The latter approach is proposed as an ideal mechanism to support the IT/business alignment process and its related IT governance process. Among some of the topics included in this book are: software measurement; ERP project evaluation; strategic electronic commerce evaluation.
