Download or read book Eco efficient Masonry Bricks and Blocks written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2014-11-27 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masonry walls constitute the interface between the building's interior and the outdoor environment. Masonry walls are traditionally composed of fired-clay bricks (solid or perforated) or blocks (concrete or earth-based), but in the past (and even in the present) they were often associated as needing an extra special thermal and acoustical insulation layer. However, over more recent years investigations on thermal and acoustical features has led to the development of new improved bricks and blocks that no longer need these insulation layers. Traditional masonry units (fired-clay bricks, concrete or earth-based blocks) that don't offer improved performance in terms of thermal and acoustical insulation are a symbol of a low-technology past, that are far removed from the demands of sustainable construction.This book provides an up-to-date state-of-the-art review on the eco-efficiency of masonry units, particular emphasis is placed on the design, properties, performance, durability and LCA of these materials. Since masonry units are also an excellent way to reuse bulk industrial waste the book will be important in the context of the Revised Waste Framework Directive 2008/98/EC which states that the minimum reuse and recycling targets for construction and demolition waste (CDW) should be at least 70% by 2020. On the 9th of March 2011 the European Union approved the Regulation (EU) 305/2011, known as the Construction Products Regulation (CPR) and it will be enforced after the 1st of July 2013. The future commercialization of construction materials in Europe makes their environmental assessment mandatory meaning that more information related to the environmental performance of building materials is much needed. - Provides an authoritative guide to the eco-efficiency of masonry units - Examines the reuse of waste materials - Covers a range of materials including, clay, cement, earth and pumice

Download or read book Eco efficient Masonry Bricks and Blocks written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2014-12-19 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masonry walls constitute the interface between the building's interior and the outdoor environment. Masonry walls are traditionally composed of fired-clay bricks (solid or perforated) or blocks (concrete or earth-based), but in the past (and even in the present) they were often associated as needing an extra special thermal and acoustical insulation layer. However, over more recent years investigations on thermal and acoustical features has led to the development of new improved bricks and blocks that no longer need these insulation layers. Traditional masonry units (fired-clay bricks, concrete or earth-based blocks) that don't offer improved performance in terms of thermal and acoustical insulation are a symbol of a low-technology past, that are far removed from the demands of sustainable construction. This book provides an up-to-date state-of-the-art review on the eco-efficiency of masonry units, particular emphasis is placed on the design, properties, performance, durability and LCA of these materials. Since masonry units are also an excellent way to reuse bulk industrial waste the book will be important in the context of the Revised Waste Framework Directive 2008/98/EC which states that the minimum reuse and recycling targets for construction and demolition waste (CDW) should be at least 70% by 2020. On the 9th of March 2011 the European Union approved the Regulation (EU) 305/2011, known as the Construction Products Regulation (CPR) and it will be enforced after the 1st of July 2013. The future commercialization of construction materials in Europe makes their environmental assessment mandatory meaning that more information related to the environmental performance of building materials is much needed. Provides an authoritative guide to the eco-efficiency of masonry units Examines the reuse of waste materials Covers a range of materials including, clay, cement, earth and pumice

Download or read book Interlocking Stabilised Soil Blocks written by Adrián Mauricio Pérez-Peña and published by UN-HABITAT. This book was released on 2009 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Brick and Block Masonry From Historical to Sustainable Masonry written by Jan Kubica and published by CRC Press. This book was released on 2020-07-06 with total page 1097 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brick and Block Masonry - From Historical to Sustainable Masonry contains the keynote and semi-keynote lectures and all accepted regular papers presented online during the 17th International Brick and Block Masonry Conference IB2MaC (Kraków, Poland, July 5-8, 2020). Masonry is one of the oldest structures, with more than 6,000 years of history. However, it is still one of the most popular and traditional building materials, showing new and more attractive features and uses. Modern masonry, based on new and modified traditional materials and solutions, offers a higher quality of life, energy savings and more sustainable development. Hence, masonry became a more environmentally friendly building structure. Brick and Block Masonry - From Historical to Sustainable Masonry focuses on historical, current and new ideas related to masonry development, and will provide a very good platform for sharing knowledge and experiences, and for learning about new materials and technologies related to masonry structures. The book will be a valuable compendium of knowledge for researchers, representatives of industry and building management, for curators and conservators of monuments, and for students.

Download or read book Eco efficient Construction and Building Materials written by Fernando Pacheco Torgal and published by Springer Science & Business Media. This book was released on 2011-07-31 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Construction and Building Materials provides essential reading about materials for the construction industry in the twenty-first century. It covers the latest findings in the field, especially the toxicity aspects, embodied energy, construction and demolition wastes, the use of wastes in concrete, masonry units, materials reinforced with vegetable fibres, earth construction, the durability aspects, and also the importance of nanotechnology to the development of more environmentally-friendly materials. Based on more than nine hundred references, Eco-efficient Construction and Building Materials is of fundamental importance to academics, engineers and architects who are dedicated to the creation of a greener and more holistic construction industry.

Download or read book Brick and Block Masonry written by John W. De Courcy and published by . This book was released on 1988 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text consists of proceedings of the Eighth International Brick and Block Masonry Conference, held in Trinity College, Dublin, Ireland, 19-21 September 1988.

Download or read book Ecological and Health Effects of Building Materials written by Junaid Ahmad Malik and published by Springer Nature. This book was released on 2021-08-07 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the present adverse effects of using precarious building materials on the ecology and human health. Also, the detailed discussions on the novel and greener construction materials and their utilization as an alternative to the conventional harmful existing methods and materials are also presented in the subsequent chapters. This book helps to fill the research gaps in the existing prior-art knowledge in the field of sustainable construction and green building materials and methods giving due importance to ecology and health, specifically to the fields of sustainable structural engineering, sustainable geotechnical engineering, sustainable road engineering, etc. This book helps in achieving a sustainable environment through possible adoption of innovative and ecological construction practices. Hence, this book acts as a practical workbook, mainly for the academicians and practicing engineers who are willing to work toward the consecrated building industry. It is a well-established fact that the constructions of the engineering structures consume more and more earth resources than any other human activities in the world. In addition, the construction-related activities will produce several million tons of greenhouse gases, toxic emissions, water pollutants, and solid wastes. This creates a huge impact on environment and causes severe health issues on humans and animals. It is thus important to create an eco-friendly construction environment which can satisfy the ecological and health requirements.

Download or read book The Fundamentals of Brick Manufacturing written by Md. Faruque Hossain and published by . This book was released on 2020 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Over the recent years, the brick industry of the state has been facing competition from several other building materials. These include cement and cement blocks. In most developing countries, brick makers make only a unique type and color of brick, leaving the user very little choice. As a result, substitute products enter the market which have the same function but are cheaper, more regular and pleasing in look. These substitutes satisfy the consumers more than bricks do. Although in general, the output of bricks is quite elastic, in the sense that increased construction activities are closely followed by an increase in brick production, the brick industry does have certain challenges posed by competition from substitutes. It is evident from the fore going discussion that bricks face stiff competition from alternative building materials. Therefore, in order to remain competitive, the clay brick industry will have to contain cost, increase module size, reduce mortar usage and improve ease of layering in order to retain and increase market share in the building and construction industry. Bricks in general are preferred, even if they are of low quality, because of their inherent and perceived characteristics of strength and moisture resistance. The industry will therefore have to emphasize if positive characteristics and options in order to compete with the alternative building materials which have a similar function. The brick industry, being ancillary to the construction industry, is intimately connected with the growth of the latter. Any attempts for market assessment should therefore focus on estimation of demand, supply and price position in the construction industry. There is little doubt that in the foreseeable future there will be an increasing demand for housing, particularly in cities and urban areas. To provide shelter for all, all construction sectors, including traditional sectors should be involved in providing affordable housing for the urban as well as the rural poor people. If these poorer sections of the population are to be assisted to build durable as well as affordable housing, the focus of attention will have to be placed on the provision of suitable and affordable building materials. Unfortunately it appears that in developing countries, the major thrust in the building materials industry has been placed on the more modern building materials. However, in most countries there is a need for cheap and good quality local building materials such as bricks, wood, bamboo etc. These are the materials most people of these countries can afford. If locally produced materials using local resources are utilized, which are often renewable, the cost will be low and income will be generated at the local level. Therefore, the development of the local building materials industry must receive close attention and utmost care. The objective of the local building materials industries should be not only to make available the materials traditionally used by the low income sections of the community but also to modify production processes and construction techniques to enable construction of houses which are structurally more durable and functionally more adequate. However, this books deals with brick manufacturing and its history details to provide updated information to the readers. Therefore, throughout the book, different authors present very interesting works related to the brick manufacturing in home and abroad. There is no doubt buyers will benefit by getting an excellent piece of this book"--

Download or read book Brick and Block Masonry written by Claudio Modena and published by CRC Press. This book was released on 2016-11-03 with total page 4087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brick and Block Masonry - Trends, Innovations and Challenges contains the lectures and regular papers presented at the 16th International Brick and Block Masonry Conference (Padova, Italy, 26-30 June 2016). The contributions cover major topics: - Analysis of masonry structures - Bond of composites to masonry - Building physics and durability - Case studies - Codes and standards - Conservation of historic buildings - Earthen constructions - Eco-materials and sustainability - Fire resistance, blasts, and impacts - Masonry bridges, arches and vaults - Masonry infill walls and RC frames - Masonry materials and testing - Masonry repair and strengthening - New construction techniques and technologies - Reinforced and confined masonry - Seismic performance and vulnerability assessment In an ever-changing world, in which innovations are rapidly implemented but soon surpassed, the challenge for masonry, the oldest and most traditional building material, is that it can address the increasingly pressing requirements of quality of living, safety, and sustainability. This abstracts volume and full paper USB device, focusing on challenges, innovations, trends and ideas related to masonry, in both research and building practice, will proof to be a valuable source of information for researchers and practitioners, masonry industries and building management authorities, construction professionals and educators.

Download or read book Nearly Zero Energy Building Refurbishment written by Fernando Pacheco Torgal and published by Springer Science & Business Media. This book was released on 2013-10-22 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recast of the Energy Performance of Buildings Directive (EPBD) was adopted by the European Parliament and the Council of the European Union on 19 May 2010. For new buildings, the recast fixes 2020 as the deadline for all new buildings to be “nearly zero energy” (and even sooner for public buildings – by the end of 2018). This book gives practitioner an important tool to tackle the challenges of building refurbishment towards nearly zero energy. This book is welcome at this time and sets the scene for professionals whether practitioners or researchers to learn more about how we can make whether old or new buildings more efficient and effective in terms of energy performance.

Download or read book Adobe Homes for All Climates written by Lisa Schroder and published by Chelsea Green Publishing. This book was released on 2010-09-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lay-up of adobe bricks is an easy, forgiving way to achieve a solid masonry-wall system. Contrary to stereotypes, adobe is perfectly adaptable for use in cold, wet climates as well as hot and dry ones, and for areas prone to earthquakes. With its efficient use of energy, natural resources for construction, and minimal effort for long-term maintenance, it’s clear that the humble adobe brick is an ideal option for constructing eco-friendly structures throughout the world. The book is ideal both for first-time do-it-yourselfers and for experienced adobe builders seeking to improve their craft. Drawing on the experience of more than fifty major adobe projects since 1993, Adobe Homes for All Climates describes Adobe Building Systems’ patented reinforcement and scaffolding systems, showing readers how to construct adobe homes more easily and safely, and with superior strength, durability, structural integrity, and aesthetic appeal, as compared to earthen homes of the past. All aspects of adobe construction are covered, including making and laying adobe bricks, installing lintels and arches, conduits and pipes, doors and windows, top plates and bondbeams, ideal wall dimensions, adobe finishes, and other adobe construction components, such as the inexpensive use of scaffolding. These methods will produce a premium product that will meet and often exceed inspection standards. Equipped with this manual, you will be able to obtain a building permit, make adobe bricks swiftly, and confidently lay them up. You will be able to beautifully finish your adobe walls with earth plasters creating stunning colors and outstanding light effects and create a beautiful, energy-efficient home that will last for generations to come.

Download or read book Use of Recycled Plastics in Eco efficient Concrete written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2018-11-21 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Use of Recycled Plastics in Eco-efficient Concrete looks at the processing of plastic waste, including techniques for separation, the production of plastic aggregates, the production of concrete with recycled plastic as an aggregate or binder, the fresh properties of concrete with plastic aggregates, the shrinkage of concrete with plastic aggregates, the mechanical properties of concrete with plastic aggregates, toughness of concrete with plastic aggregates, modulus of elasticity of concrete with plastic aggregates, durability of concrete with plastic aggregates, concrete plastic waste powder with enhanced neutron radiation shielding, and more, thus making it a valuable reference for academics and industrial researchers. Describes the main types of recycled plastics that can be applied in concrete manufacturing Presents, for the first time, state-of-the art knowledge on the properties of conventional concrete with recycled plastics Discusses the technological challenges for concrete manufactures for mass production of recycled concrete from plastic waste

Download or read book Eco efficient Repair and Rehabilitation of Concrete Infrastructures written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2017-11-15 with total page 777 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient Repair and Rehabilitation of Concrete Infrastructures provides an updated state-of-the-art review on eco-efficient repair and rehabilitation of concrete infrastructure. The first section focuses on deterioration assessment methods, and includes chapters on stress wave assessment, ground-penetrating radar, monitoring of corrosion, SHM using acoustic emission and optical fiber sensors. Other sections discuss the development and application of several new innovative repair and rehabilitation materials, including geopolymer concrete, sulfoaluminate cement-based concrete, engineered cementitious composites (ECC) based concrete, bacteria-based concrete, concrete with encapsulated polyurethane, and concrete with super absorbent polymer (SAPs), amongst other topics. Final sections focus on crucial design aspects, such as quality control, including lifecycle and cost analysis with several related case studies on repair and rehabilitation. The book will be an essential reference resource for materials scientists, civil and structural engineers, architects, structural designers and contractors working in the construction industry. Delivers the latest research findings with contributions from leading international experts Provides fully updated information on the European standard on materials for concrete repair (EN 1504) Includes an entire sections on the state-of-the-art in NDT, innovative repair and rehabilitation materials, as well as LCC and LCA information

Download or read book Eco efficient Materials for Mitigating Building Cooling Needs written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2015-02-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change is one of the most important environmental problems faced by Planet Earth. The majority of CO2 emissions come from burning fossil fuels for energy production and improvements in energy efficiency shows the greatest potential for any single strategy to abate global greenhouse gas (GHG) emissions from the energy sector. Energy related emissions account for almost 80% of the EU's total greenhouse gas emissions. The building sector is the largest energy user responsible for about 40% of the EU’s total final energy consumption. In Europe the number of installed air conditioning systems has increased 500% over the last 20 years, but in that same period energy cooling needs have increased more than 20 times. The increase in energy cooling needs relates to the current higher living and working standards. In urban environments with low outdoor air quality (the general case) this means that in summer-time one cannot count on natural ventilation to reduce cooling needs. Do not forget the synergistic effect between heat waves and air pollution which means that outdoor air quality is worse in the summer aggravating cooling needs. Over the next few years this phenomenon will become much worse because more people will live in cities, more than 2 billion by 2050 and global warming will aggravate cooling needs. An overview of materials to lessen the impact of urban heat islands Excellent coverage of building materials to reduce air condtioning needs Innovative products discussed such as Thermo and Electrochromic materials

Download or read book Biopolymers and Biotech Admixtures for Eco Efficient Construction Materials written by Fernando Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2016-01-11 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1930 more than 100,000 new chemical compounds have been developed and insufficient information exists on the health assessment of 95 percent of these chemicals in which a relevant percentage are used in construction products. For instance Portland cement concrete, the most used material on the Planet (10.000 million tons/year that in the next 40 years will increase around 100 %) currently used in around 15% of total concrete production contains chemicals used to modify their properties, either in the fresh or hardened state. Biopolymers are materials that are developed from natural resources. They reduce dependence on fossil fuels and reduce carbon dioxide emissions. There is a worldwide demand to replace petroleum-based materials with renewable resources. Currently bio-admixtures represent just a small fraction of the chemical admixtures market (around 20%) but with environmental awareness for constituents in construction materials generally growing (the Construction Products Regulation is being enforced in Europe since 2013), the trend towards bio-admixtures is expected to continue. This book provides an updated state-of-the-art review on biopolymers and their influence and use as admixtures in the development of eco-efficient construction materials. Provides essential knowledge for researchers and producers working on the development of biopolymer-modified construction materials Discusses the various types of biopolymers currently available, their different production techniques, their use as bio-admixtures in concretes and mortars and applications in other areas of civil engineering such as soil stability, wood preservation, adhesives and coatings All contributions are made from leading researchers, who have intensive involvement in the design and use of biopolymers in construction materials

Download or read book Global Waste Management Outlook written by United Nations Publications and published by UN. This book was released on 2017-03-31 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The UNEP Governing Council of February 2013 requested the United Nations Environment Programme "to develop a global outlook of challenges, trends and policies in relation to waste prevention, minimization and management, taking into account the materials life cycle, subject to the availability of extra-budgetary resources and in consultation with Governments and stakeholders, building on available data, best practices and success stories, taking into account the Global Chemicals Outlook and any other relevant initiatives and taking care not to duplicate existing information, to provide guidance for national policy planning." UNEP's International Environmental Technology Centre (IETC), in collaboration with the International Solid Waste Association (ISWA), has taken the lead on this initiative; aiming to develop the Global Waste Management Outlook as a tool to provide an authoritative overview, analysis and recommendations for action of policy instruments and financing models for waste management. The GWMO is the result of two year's work and provides the first comprehensive global overview of the state of waste management around the world in the 21st century.

Download or read book Handbook of Alkali Activated Cements Mortars and Concretes written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2014-11-20 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet's total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint. - Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders - Considers performance in adverse environmental conditions. - Offers equal emphasis on the science behind the technology and its use in civil engineering.