Download or read book Earthquake Resistant Buildings written by M.Y.H. Bangash and published by Springer Science & Business Media. This book was released on 2011-08-19 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise work provides a general introduction to the design of buildings which must be resistant to the effect of earthquakes. A major part of this design involves the building structure which has a primary role in preventing serious damage or structural collapse. Much of the material presented in this book examines building structures. Due to the recent discovery of vertical components, it examines not only the resistance to lateral forces but also analyses the disastrous influence of vertical components. The work is written for Practicing Civil, Structural, and Mechanical Engineers, Seismologists and Geoscientists. It serves as a knowledge source for graduate students and their instructors.

Download or read book Wind and Earthquake Resistant Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2004-12-15 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed as a resource for practicing engineers, while simultaneously serving as a text in a formal classroom setting, Wind and Earthquake Resistant Buildings provides a fundmental understanding of the behavior of steel, concrete, and composite building structures. The text format follows, in a logical manner, the typical process of designing a bu

Download or read book Earthquake Resistant Structures written by Mohiuddin Ali Khan and published by Butterworth-Heinemann. This book was released on 2013-03-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake engineering is the ultimate challenge for structural engineers. Even if natural phenomena involve great uncertainties, structural engineers need to design buildings, bridges, and dams capable of resisting the destructive forces produced by them. These disasters have created a new awareness about the disaster preparedness and mitigation. Before a building, utility system, or transportation structure is built, engineers spend a great deal of time analyzing those structures to make sure they will perform reliably under seismic and other loads. The purpose of this book is to provide structural engineers with tools and information to improve current building and bridge design and construction practices and enhance their sustainability during and after seismic events. In this book, Khan explains the latest theory, design applications and Code Provisions. Earthquake-Resistant Structures features seismic design and retrofitting techniques for low and high raise buildings, single and multi-span bridges, dams and nuclear facilities. The author also compares and contrasts various seismic resistant techniques in USA, Russia, Japan, Turkey, India, China, New Zealand, and Pakistan. Written by a world renowned author and educator Seismic design and retrofitting techniques for all structures Tools improve current building and bridge designs Latest methods for building earthquake-resistant structures Combines physical and geophysical science with structural engineering

Download or read book Fundamentals of Earthquake Resistant Construction written by Ellis L. Krinitzsky and published by John Wiley & Sons. This book was released on 1993-01-12 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for engineers without a background in seismic design. Provides design standards and parameters, explaining how to interpret and apply them. Examines and recommends procedures to accommodate the enormous forces and variations in effects common to major earthquakes. Covers practical aspects of soil behavior and structural and foundation design. Gives tips on special construction situations: foundations, dams and retaining walls, strengthening existing structures and construction over active faults.

Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.

Download or read book Design of Earthquake Resistant Structures written by Emilio Rosenblueth and published by . This book was released on 1980 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Resistant Design with Rubber written by James M. Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: My involvement in the use of natural rubber as a method for the protec 1976. At that time, tion of buildings against earthquake attack began in I was working on the development of energy-dissipating devices for the same purpose and had developed and tested a device that was even tually used in a stepping-bridge structure, this being a form of partial isolation. It became clear to me that in order to use these energy devices for the earthquake protection of buildings, it would be best to combine them with an isolation system which would give them the large displace ments needed to develop sufficient hysteresis. At this appropriate point in time, I was approached by Dr. C. J. Derham, then of the Malaysian Rubber Producers' Research Association (MRPRA), who asked if I was interested in looking at the possibility of conducting shaking table tests at the Earthquake Simulator Laboratory to see to what extent natural rubber bearings could be used to protect buildings from earthquakes. Very soon after this meeting, we were able to do such a test using a 20-ton model and hand-made isolators. The eady tests were very promising. Accordingly, a further set of tests was done with a more realistic five storey model weighing 40 tons with bearings that were commercially made. In both of the test series, the isolators were used both alone and with a number of different types of energy-dissipating devices to en hance damping.

Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Resistant Building Design and Construction written by Norman B. Green and published by . This book was released on 1978 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Homebuilder s Guide to Earthquake Resistant Design and Construction written by and published by FEMA. This book was released on 2008 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthquake Resistant Construction and Design written by International Conference on Earthquake Resistant Construction and Design (Berlin)) and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Earthquake resistant Buildings written by Minoru Wakabayashi and published by McGraw-Hill Companies. This book was released on 1986 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EARTHQUAKE RESISTANT DESIGN OF STRUCTURES written by PANKAJ AGRAWAL and published by PHI Learning Pvt. Ltd.. This book was released on 2006-01-01 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and well-organized book presents the concepts and principles of earthquake resistant design of structures in an easy-to-read style. The use of these principles helps in the implementation of seismic design practice. The book adopts a step-by-step approach, starting from the fundamentals of structural dynamics to application of seismic codes in analysis and design of structures. The text also focusses on seismic evaluation and retrofitting of reinforced concrete and masonry buildings. The text has been enriched with a large number of diagrams and solved problems to reinforce the understanding of the concepts. Intended mainly as a text for undergraduate and postgraduate students of civil engineering, this text would also be of considerable benefit to practising engineers, architects, field engineers and teachers in the field of earthquake resistant design of structures.

Download or read book Bracing for Disaster written by Stephen Tobriner and published by Heyday.ORIM. This book was released on 2015-05-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The first history of seismic engineering in San Francisco . . . spiced with survivor and eyewitness accounts. ”—Midwest Book Review For the past one hundred and fifty years, architects and engineers have quietly been learning from each quake and designing newer earthquake-resistant building techniques and applying them in an ongoing effort to save San Francisco. Bracing for Disaster is a fresh appraisal of a city responding to repeated devastation. In the language of a skilled teacher, Tobriner examines what really happened during the city’s earthquakes—which buildings were damaged, which survived, and who were the unsung heroes. Filled with more than two hundred photographs, diagrams, and illustrations, this is a revealing look at the history of buildings by a true expert, and it offers lessons not just for San Francisco but for any city beset by natural disasters. “The real saga is how a fast-growing city grapples with the reality that it has more to worry about than fires and fog. The core of the story is fairly technical, rooted in the crude intuitive ways in which builders reacted to a seismic threat they could neither measure nor define. But Tobriner crafts the story well.”—SFGate

Download or read book Earthquake Resistant Design of Buildings written by Muhammad Hadi and published by CRC Press. This book was released on 2017-10-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing important concepts in the study of earthquakes related to retrofitting of structures to be made earthquake resistant. The book investigates the pounding effects on base-isolated buildings, the soil-structure-interaction effects on adjacent buildings due to the impact, the seismic protection of adjacent buildings and the mitigation of earthquakeinduced vibrations of two adjacent structures. These concepts call for a new understanding of controlled systems with passive-active dampers and semi-active dampers. The passive control strategy of coupled buildings is investigated for seismic protection in comparison to active and semi-active control strategies.

Download or read book Building Configuration and Seismic Design written by Christopher Arnold and published by . This book was released on 1981 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis Procedure for Earthquake Resistant Structures written by Farzad Hejazi and published by Springer. This book was released on 2018-05-15 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an analysis procedure for structures that are exposed to the lateral loads such as earthquake and wind. It includes the process for calculating and distributing the effective load into structural elements, as well as for calculating the displacements for different types of structures, e.g. reinforced concrete and steel framed structures. The book provides civil engineers with clear guidelines on how to perform seismic analysis for various building systems, and how to distribute the lateral load to the structural components. This book consists of 4 chapters: The first chapter offers an introduction, while Chapter 2 discusses moment resistance frame. The final two chapters explore shear wall frames and brace frames respectively. Each chapter follows the same structure, explaining step by step all the necessary algorithms, equations and procedures for calculating 1) loads, 2) the centre of mass, 3) stiffness of structures, 4) centre of stiffness, 5) lateral loading, 6) the distribution of lateral loads, and 7) the lateral displacement. Demonstrating the implementation of real building analysis, the book provides architectural drawings and structural plans at the beginning of each chapter.