Download or read book Earthquake Protection of Essential Building Equipment written by Gary L. McGavin and published by John Wiley & Sons. This book was released on 1981 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Earthquake Protection of Building Equipment and Systems written by Jeffrey A. Gatscher and published by Amer Society of Civil Engineers. This book was released on 2012 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gatscher, McGavin, and Caldwell present a framework for applying the latest earthquake engineering research to the nonstructural elements of individual building projects, concentrating on mechanical and electrical systems.
Download or read book Earthquake Protection of Building Equipment and Systems Introduction to Demand Allocation Chapter 2 Stakeholder Commentary Chapter 3 Geotechnical Primer Chapter 4 Building Code Seismic Requirements Part 2 Nonstructural Capacity Chapter 5 Introduction to Seismic Qualification Chapter 6 Analytical Methods Chapter 7 Dynamic Test Methods Chapter 8 Comparative Experience Methods Chapter 9 Combined Methods Chapter 10 Trends in Earthquake Protection of Nonstructural Systems Appendix Test Facility Selection Points to Consider written by Jeffery A. Gatscher and published by . This book was released on 2012 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Protection of Building Equipment and Systems presents a framework for applying the latest earthquake engineering research to the nonstructural elements of individual building projects, concentrating on mechanical and electrical systems. The seismic performance of these systems and their components is critical in order to minimize damage and life-threatening risks associated with seismic events while also protecting capital investment. And just as the seismic engineering of structures is shifting from prescriptive-based standards to performance-based approaches, the same is happening for building equipment and systems. For practicing engineers, a gap has opened between what is required and what is available to meet those requirements. In this book, Gatscher, McGavin, and Caldwell bridge that gap. They prescribe a systems engineering approach to nonstructural design and present several case studies to demonstrate this approach. They provide an extensive survey of different methods for qualifying equipment and systems, including analysis, dynamic testing, earthquake experience data, and comparative assessment using combined methods. They also address issues of implementation, including qualification ownership, component life-cycle, and verification tools. This book is a must-have for any engineer designing or specifying nonstructural systems and their components for a building in an area with seismic risks. It will also be a valuable reference for architects, construction managers, and building code officials.
Download or read book Earthquake Protection written by Andrew W. Coburn and published by . This book was released on 1992-12-29 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: An all-encompassing guide to environmental planning for earthquakes. Discusses prediction and preparation as well as emergency management and recovery. Examines how to enact and evaluate protection strategies. Considers site selection, seismic hazard assessment and improving earthquake resistance of buildings. Addresses loss estimation, risk and vulnerability analysis. Assesses possibilities for reducing earthquake disasters. Includes recommendations for further reading.
Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Why Do Buildings Collapse in Earthquakes Building for Safety in Seismic Areas written by Robin Spence and published by John Wiley & Sons. This book was released on 2021-08-09 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: WHY DO BUILDINGS COLLAPSE IN EARTHQUAKES? Learn from the personal experience and insights of leading earthquake engineering specialists as they examine the lessons from disasters of the last 30 years and propose a path to earthquake safety worldwide Why Do Buildings Collapse in Earthquakes?: Building for Safety in Seismic Areas delivers an insightful and comprehensive analysis of the key lessons taught by building failures during earthquakes around the world. The book uses empirical evidence to describe the successes of earthquake engineering and disaster preparedness, as well as the failures that may have had tragic consequences. Readers will learn what makes buildings in earthquake zones vulnerable, what can be done to design, build and maintain those buildings to reduce or eliminate that vulnerability, and what can be done to protect building occupants. Those who are responsible for the lives and safety of building occupants and visitors—architects, designers, engineers, and building owners or managers—will learn how to provide adequate safety in earthquake zones. The text offers useful and accessible answers to anyone interested in natural disasters generally and those who have specific concerns about the impact of earthquakes on the built environment. Readers will benefit from the inclusion of: A thorough introduction to how buildings have behaved in earthquakes, including a description of the world’s most lethal earthquakes and the fatality trend over time An exploration of how buildings are constructed around the world, including considerations of the impact of climate and seismicity on home design A discussion of what happens during an earthquake, including the types and levels of ground motion, landslides, tsunamis, and sequential effects, and how different types of buildings tend to behave in response to those phenomena What different stakeholders can do to improve the earthquake safety of their buildings The owners and managers of buildings in earthquake zones and those responsible for the safety of people who occupy or visit them will find Why Do Buildings Collapse in Earthquakes? Building for Safety in Seismic Areas essential reading, as will all architects, designers and engineers who design or refurbish buildings in earthquake zones.
Download or read book Reducing the Risks of Nonstructural Earthquake Damage written by Eduardo A. Fierro and published by DIANE Publishing. This book was released on 1994 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the sources of nonstructural earthquake damage in simple terms, and provides information on effective methods of reducing the potential risks. Intended for a lay audience: building owners, facilities managers, maintenance personnel, store or office managers, corporate/agency department heads, business proprietors, homeowners. Covers: building utility systems (batteries, piping, chillers); architectural elements (stairways, windows, exterior signs); and furniture and contents (library stacks, artwork, stoves, cabinets, etc.). Drawings and photos. Glossary and bibliography.
Download or read book Earthquake Engineering for Nuclear Facilities written by Masanori Hamada and published by Springer. This book was released on 2016-12-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground are explained.
Download or read book Earthquake Resistant Design with Rubber written by James M. Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: My involvement in the use of natural rubber as a method for the protec 1976. At that time, tion of buildings against earthquake attack began in I was working on the development of energy-dissipating devices for the same purpose and had developed and tested a device that was even tually used in a stepping-bridge structure, this being a form of partial isolation. It became clear to me that in order to use these energy devices for the earthquake protection of buildings, it would be best to combine them with an isolation system which would give them the large displace ments needed to develop sufficient hysteresis. At this appropriate point in time, I was approached by Dr. C. J. Derham, then of the Malaysian Rubber Producers' Research Association (MRPRA), who asked if I was interested in looking at the possibility of conducting shaking table tests at the Earthquake Simulator Laboratory to see to what extent natural rubber bearings could be used to protect buildings from earthquakes. Very soon after this meeting, we were able to do such a test using a 20-ton model and hand-made isolators. The eady tests were very promising. Accordingly, a further set of tests was done with a more realistic five storey model weighing 40 tons with bearings that were commercially made. In both of the test series, the isolators were used both alone and with a number of different types of energy-dissipating devices to en hance damping.
Download or read book NEHRP National Earthquake Hazards Reduction Program Recommended Provisions for the Development of Seismic Regulations for New Buildings Appendix existing buildings written by Building Seismic Safety Council (U.S.) and published by . This book was released on 1985 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Earthquake Resistant Construction written by Ellis L. Krinitzsky and published by John Wiley & Sons. This book was released on 1993-01-12 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for engineers without a background in seismic design. Provides design standards and parameters, explaining how to interpret and apply them. Examines and recommends procedures to accommodate the enormous forces and variations in effects common to major earthquakes. Covers practical aspects of soil behavior and structural and foundation design. Gives tips on special construction situations: foundations, dams and retaining walls, strengthening existing structures and construction over active faults.
Download or read book Earthquake Protection written by Andrew Coburn and published by John Wiley & Sons. This book was released on 2002-10-11 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the successful first edition of Earthquake Protection there have been 110 lethal earthquakes, killing 130 000 people; there have also been significant developments in the field of earthquake risk management, particularly in the modelling and analysis of risk for insurance and financial services. Furthermore, major earthquake disasters, such as the 1994 Northridge earthquake in California, the 1995 Kobe earthquake in Japan and the 1999 Kocaeli earthquake in Turkey have occurred. The experience and knowledge gained through these events have improved our understanding of how to manage, mitigate and work towards the prevention of similar catastrophes. The 1990s were in fact the costliest decade on record in terms of disaster management due to such seismic events, placing unprecedented pressure on the insurance industry in particular, and changing its view of earthquake protection. Significantly revised and updated, this second edition continues to provide a comprehensive overview of how to reduce the impact of earthquakes on people and property, and implement best practice in managing the consequences of such disasters. It also includes significant coverage of the techniques of modelling earthquake catastrophe. Each chapter deals with a separate aspect of protection, and covers a wide range of economic and social conditions, drawing on the authors' considerable personal experience and with reference to real life examples. Key features include: Recent event coverage Modern developments in the theory and practice of planning and engineering loss estimation techniques, along with new engineering techniques such as microzonation and hazard-mapping Historic buildings experience An entirely new chapter on 'Earthquakes and Finance' This valuable book provides essential reading for earthquake and structural engineers and geoscientists, as well as insurers and loss prevention specialists, risk managers and assessors involved in managing earthquake risk, urban and regional planners, and emergency management agencies.
Download or read book NEHRP Recommended Provisions National Earthquake Hazards Reduction Program for Seismic Regulations for New Buildings and Other Structures Commentary written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Resistant Design of Buildings written by Muhammad Hadi and published by CRC Press. This book was released on 2017-10-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing important concepts in the study of earthquakes related to retrofitting of structures to be made earthquake resistant. The book investigates the pounding effects on base-isolated buildings, the soil-structure-interaction effects on adjacent buildings due to the impact, the seismic protection of adjacent buildings and the mitigation of earthquakeinduced vibrations of two adjacent structures. These concepts call for a new understanding of controlled systems with passive-active dampers and semi-active dampers. The passive control strategy of coupled buildings is investigated for seismic protection in comparison to active and semi-active control strategies.
Download or read book Homebuilder s Guide to Earthquake Resistant Design and Construction written by and published by FEMA. This book was released on 2008 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Study to Establish Seismic Protection Provisions for Furniture Equipment Supplies for VA Hospitals written by United States. Veterans Administration. Research Staff Office of Construction and published by . This book was released on 1976 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NEHRP National Earthquake Hazards Reduction Program Recommended Provisions for the Development of Seismic Regulations for New Buildings Commentary written by Building Seismic Safety Council (U.S.) and published by . This book was released on 1985 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
