Download or read book Earthquake Protection of Building Equipment and Systems Introduction to Demand Allocation Chapter 2 Stakeholder Commentary Chapter 3 Geotechnical Primer Chapter 4 Building Code Seismic Requirements Part 2 Nonstructural Capacity Chapter 5 Introduction to Seismic Qualification Chapter 6 Analytical Methods Chapter 7 Dynamic Test Methods Chapter 8 Comparative Experience Methods Chapter 9 Combined Methods Chapter 10 Trends in Earthquake Protection of Nonstructural Systems Appendix Test Facility Selection Points to Consider written by Jeffery A. Gatscher and published by . This book was released on 2012 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Protection of Building Equipment and Systems presents a framework for applying the latest earthquake engineering research to the nonstructural elements of individual building projects, concentrating on mechanical and electrical systems. The seismic performance of these systems and their components is critical in order to minimize damage and life-threatening risks associated with seismic events while also protecting capital investment. And just as the seismic engineering of structures is shifting from prescriptive-based standards to performance-based approaches, the same is happening for building equipment and systems. For practicing engineers, a gap has opened between what is required and what is available to meet those requirements. In this book, Gatscher, McGavin, and Caldwell bridge that gap. They prescribe a systems engineering approach to nonstructural design and present several case studies to demonstrate this approach. They provide an extensive survey of different methods for qualifying equipment and systems, including analysis, dynamic testing, earthquake experience data, and comparative assessment using combined methods. They also address issues of implementation, including qualification ownership, component life-cycle, and verification tools. This book is a must-have for any engineer designing or specifying nonstructural systems and their components for a building in an area with seismic risks. It will also be a valuable reference for architects, construction managers, and building code officials.
Download or read book Design Guide for Improving School Safety in Earthquakes Floods and High Winds written by and published by . This book was released on 2004 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is intended to provide guidance for the protection of school buildings and their occupants from natural disasters, and the economic losses and social disruption caused by building damage and destruction. This volume concentrates on grade schools, K-12. This publication covers earthquakes, floods, and high winds. Its intended audience is design professionals and school officials involved in the technical and financial decisions of school construction, repair, and renovations. This publication stresses that identification of hazards and their frequency and careful consideration of design against hazards must be integrated with all other design issues, and be present from the inception of the site selection and building design process. Chapters 1-3 present issues and background information that are common to all hazards. Chapters 4-6 cover the development of specific risk management measures for each of the three main natural hazards. Chapter 1 opens with a brief outline of the past, present, and future of school design. Chapter 2 introduces the concepts of performance-based design in order to obtain required performance from a new or retrofitted facility. Chapter 3 introduces the concept of multihazard design and presents a general description and comparison of the hazards, including charts that show where design against each hazard interacts with design for other hazards. Chapters 4, 5, and 6 outline the steps necessary in the creation of design to address risk management concerns for protection against earthquakes, floods, and high winds, respectively. A guide to the determination of acceptable risk and realistic performance objectives is followed by a discussion to establish the effectiveness of current codes to achieve acceptable performance. A list of acronyms used in the manual are appended. (Contains 13 tables and 124 figures.).
Download or read book Earthquake Engineering for Structural Design written by Victor Gioncu and published by CRC Press. This book was released on 2010-08-04 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Earthquake Engineering have focussed on the capacity and response of structures. They often overlook the importance of seismological knowledge to earthquake-proofing of design. It is not enough only to understand the anatomy of the structure, you must also appreciate the nature of the likely earthquake.Seismic design, as detailed in
Download or read book Reducing the Risks of Nonstructural Earthquake Damage written by Robert Reitherman and published by . This book was released on 1985 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Seismic Design Criteria for New Steel Moment Frame Buildings FEMA 350 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended design criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
Download or read book Reducing Disaster Risk by Managing Urban Land Use written by Asian Development Bank and published by Asian Development Bank. This book was released on 2016-06-01 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides guidance for urban planners on how to use land use management-related tools they have at their disposal---land use planning, development control instruments, greenfield development, and urban redevelopment---to reduce disaster risk and contribute to strengthening urban resilience and sustainable urban development. The guidance provided in the document is further illustrated through case studies showing examples where urban land use management-related tools have been adopted to reduce disaster risk. It is hoped that this publication will support urban planners as a professional group to step up and embrace disaster risk reduction.
Download or read book Understanding the economic and financial impacts of natural disasters written by Charlotte Benson and published by World Bank Publications. This book was released on 2004 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cities and Flooding written by Abhas K. Jha and published by World Bank Publications. This book was released on 2012-02-01 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban flooding is an increasing challenge today to the expanding cities and towns of developing countries. This Handbook is a state-of-the art, user-friendly operational guide that shows decision makers and specialists how to effectively manage the risk of floods in rapidly urbanizing settings--and within the context of a changing climate.
Download or read book Disaster Risk Reduction written by John Twigg and published by . This book was released on 2004 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Missing Piece written by and published by . This book was released on 2003 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Trends in Civil Engineering written by K. K. Pathak and published by Springer Nature. This book was released on 2020-09-27 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed proceedings of the International Conference on Recent Trends and Innovations in Civil Engineering (ICRTICE 2019). The volume focuses on latest research and advances in the field of civil engineering and materials science such as design and development of new environmental materials, performance testing and verification of smart materials, performance analysis and simulation of steel structures, design and performance optimization of concrete structures, and building materials analysis. The book also covers studies in geotechnical engineering, hydraulic engineering, road and bridge engineering, building services design, engineering management, water resource engineering and renewable energy. The contents of this book will be useful for students, researchers and professionals working in civil engineering.
Download or read book Steel Pipe written by AWWA Staff and published by American Water Works Association. This book was released on 2011-01-12 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides a review of experience and design theory regarding steel pipe used for conveying water. This fourth edition of the manual was approved in March 2003, and includes a new discussion of chemistry, casting, and heat treatment, plus new discussion of stress evaluation in spiral-welded pipe. There is revised material on ring girder d
Download or read book Advances in Hydroinformatics written by Philippe Gourbesville and published by Springer. This book was released on 2018-02-26 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a collection of extended papers based on presentations given during the SimHydro 2017 conference, held in Sophia Antipolis, Nice, France on June 14–16, 2017. It focuses on how to choose the right model in applied hydraulics and considers various aspects, including the modeling and simulation of fast hydraulic transients, 3D modeling, uncertainties and multiphase flows. The book explores both limitations and performance of current models and presents the latest developments in new numerical schemes, high-performance computing, multiphysics and multiscale methods, and better interaction with field or scale model data. It gathers the lastest theoretical and innovative developments in the modeling field and presents some of the most advance applications on various water related topics like uncertainties, flood simulation and complex hydraulic applications. Given its breadth of coverage, it addresses the needs and interests of practitioners, stakeholders, researchers and engineers alike.
Download or read book Forensic Engineering written by Alicia Díazde León and published by . This book was released on 2012-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Sixth Congress on Forensic Engineering, held in San Francisco, California, October 31-November 3, 2012. Sponsored by the Technical Council on Forensic Engineering of ASCE. This collection contains 144 peer-reviewed papers presenting findings intended to help forensic engineers develop practices and procedures to reduce the number of failures, disseminate information on failures, and provide guidelines for conducting failure investigations and for ethical conduct. Topics include: bridges; building envelopes; critical infrastructure; design practices; disaster risk management; education; emerging technologies; fires; floods; flooring; geotechnical failures; hurricanes, tornadoes, and extreme winds; investigative methodologies; practices to reduce failures; professional practice; research and testing; residential construction; and structural failures. This will be valuable to engineers, researchers, educators, and students involved in forensic engineering.
Download or read book Tools to Aid Environmental Decision Making written by Virginia H. Dale and published by Springer. This book was released on 2012-11-26 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in identifying and presenting tools to environmental decision-makers to help them improve the quality and clarity of their work. These tools range from software to policy approaches, and from environmental databases to focus groups. Equally of value to environmental managers, and students in environmental risk, policy, economics and law.
Download or read book The Structural Engineer s Professional Training Manual written by Dave K. Adams and published by McGraw Hill Professional. This book was released on 2007-11-14 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Business and Problem-Solving Skills Needed for Success in Your Engineering Career! The Structural Engineer's Professional Training Manual offers a solid foundation in the real-world business and problem-solving skills needed in the engineering workplace. Filled with illustrations and practical “punch-list” summaries, this career-building guide provides an introduction to the practice and business of structural and civil engineering, including lots of detailed advice on developing competence and communicating ideas. Comprehensive and easy-to-understand, The Structural Engineer's Professional Training Manual features: Recommendations for successfully training engineers who are new to the field Methods for bringing together ideas from a variety of sources to find workable solutions to difficult problems Information on the real-world behaviors of building materials Guidance on licensing, liability, regulations, and employment Techniques for responsibly estimating design time and cost Tips on communicating design ideas effectively Strategies for working successfully as part of a team Inside This Skills-Building Engineering Resource • The Dynamics of Training • The World of Professional Engineering • The Business of Structural Engineering • Building Projects • Bridge Projects • Building Your Own Competence • Communicating Your Designs • Engineering Mechanics • Soil Mechanics • Understanding the Behavior of Concrete • Understanding the Behavior of Masonry Construction • Understanding the Behavior of Structural Steel • Understanding the Behavior of Wood Framing
