Download or read book Earthquake Analysis and Response of Multi frame Bridges written by Satinder Pal Singh and published by . This book was released on 1994 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2009 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers seismic design for typical bridge types and applies to non-critical and non-essential bridges. Approved as an alternate to the seismic provisions in the AASHTO LRFD Bridge Design Specifications. Differs from the current procedures in the LRFD Specifications in the use of displacement-based design procedures, instead of the traditional force-based "R-Factor" method. Includes detailed guidance and commentary on earthquake resisting elements and systems, global design strategies, demand modeling, capacity calculation, and liquefaction effects. Capacity design procedures underpin the Guide Specifications' methodology; includes prescriptive detailing for plastic hinging regions and design requirements for capacity protection of those elements that should not experience damage.
Download or read book Earthquake Induced Structural Pounding written by Robert Jankowski and published by Springer. This book was released on 2015-03-14 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books analyzes different approaches to modeling earthquake-induced structural pounding and shows the results of the studies on collisions between buildings and between bridge segments during ground motions. Aspects related to the mitigation of pounding effects as well as the design of structures prone to pounding are also discussed. Earthquake-induced structural pounding between insufficiently separated buildings, and between bridge segments, has been repeatedly observed during ground motions. The reports after earthquakes indicate that it may result in limited local damage in the case of moderate seismic events, or in considerable destruction or even the collapse of colliding structures during severe ground motions. Pounding in buildings is usually caused by the differences in dynamic properties between structures, which make them vibrate out-of-phase under seismic excitation. In contrast, in the case of longer bridge structures, it is more often the seismic wave propagation effect that induces collisions between superstructure segments during earthquakes.
Download or read book Mechanics of Structures and Materials XXIV written by Hong Hao and published by CRC Press. This book was released on 2019-08-08 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6-9 December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including: • Structural mechanics • Computational mechanics • Reinforced and prestressed concrete structures • Steel structures • Composite structures • Civil engineering materials • Fire engineering • Coastal and offshore structures • Dynamic analysis of structures • Structural health monitoring and damage identification • Structural reliability analysis and design • Structural optimization • Fracture and damage mechanics • Soil mechanics and foundation engineering • Pavement materials and technology • Shock and impact loading • Earthquake loading • Traffic and other man-made loadings • Wave and wind loading • Thermal effects • Design codes Mechanics of Structures and Materials: Advancements and Challenges will be of interest to academics and professionals involved in Structural Engineering and Materials Science.
Download or read book Fundamentals of Earthquake Engineering written by Amr S. Elnashai and published by John Wiley & Sons. This book was released on 2015-07-21 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Earthquake Engineering: From Source to Fragility, Second Edition combines aspects of engineering seismology, structural and geotechnical earthquake engineering to assemble the vital components required for a deep understanding of response of structures to earthquake ground motion, from the seismic source to the evaluation of actions and deformation required for design, and culminating with probabilistic fragility analysis that applies to individual as well as groups of buildings. Basic concepts for accounting for the effects of soil-structure interaction effects in seismic design and assessment are also provided in this second edition. The nature of earthquake risk assessment is inherently multi-disciplinary. Whereas this book addresses only structural safety assessment and design, the problem is cast in its appropriate context by relating structural damage states to societal consequences and expectations, through the fundamental response quantities of stiffness, strength and ductility. This new edition includes material on the nature of earthquake sources and mechanisms, various methods for the characterization of earthquake input motion, effects of soil-structure interaction, damage observed in reconnaissance missions, modeling of structures for the purposes of response simulation, definition of performance limit states, fragility relationships derivation, features and effects of underlying soil, structural and architectural systems for optimal seismic response, and action and deformation quantities suitable for design. Key features: Unified and novel approach: from source to fragility Clear conceptual framework for structural response analysis, earthquake input characterization, modelling of soil-structure interaction and derivation of fragility functions Theory and relevant practical applications are merged within each chapter Contains a new chapter on the derivation of fragility Accompanied by a website containing illustrative slides, problems with solutions and worked-through examples Fundamentals of Earthquake Engineering: From Source to Fragility, Second Edition is designed to support graduate teaching and learning, introduce practising structural and geotechnical engineers to earthquake analysis and design problems, as well as being a reference book for further studies.
Download or read book New Design and Analysis Procedures for Intermediate Hinges in Multiple frame Bridges written by Reginald DesRoches and published by . This book was released on 1997 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Earthquake Engineering Analysis written by Alain Pecker and published by Springer Science & Business Media. This book was released on 2008-01-23 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, the state-of-the-art in Earthquake Engineering Design and Analysis has made significant steps towards a more rational analysis of structures. This book reviews the fundamentals of displacement based methods. Starting from engineering seismology and earthquake geotechnical engineering, it proceeds to focus on design, analysis and testing of structures with emphasis on buildings and bridges.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book Behavior and Failure Analysis of a Multiple frame Highway Bridge in the 1994 Northridge Earthquake written by Gregory L. Fenves and published by . This book was released on 1998 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Third National Seismic Conference and Workshop on Bridges and Highways written by Roland Nimis and published by . This book was released on 2002 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1981 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of Conference on Sustainable Traffic and Transportation Engineering in 2023 written by Andrii Bieliatynskyi and published by Springer Nature. This book was released on with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrative Oncology written by Matthew P. Mumber and published by CRC Press. This book was released on 2005-10-26 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrative Oncology explores a comprehensive, evidence-based approach to cancer care that addresses all individuals involved in the process, and can include the use of complementary and alternative medicine (CAM) therapies alongside conventional modalities such as chemotherapy, surgery, and radiation therapy. The number of integrative care programs is increasing worldwide and this book forms a foundation text for all who want to learn more about this growing field. This guide provides a thoughtful and generous perspective on integrative care, an outstanding overview of the exciting clinical opportunities these techniques can offer, and a guide to the new territories that all oncologists and CAM practitioners need to explore and understand.
Download or read book Earthquake Engineering for Structural Design written by W.F. Chen and published by CRC Press. This book was released on 2005-11-02 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many important advances in designing earthquake-resistant structures have occurred over the last several years. Civil engineers need an authoritative source of information that reflects the issues that are unique to the field. Comprising chapters selected from the second edition of the best-selling Handbook of Structural Engineering, Earthquake Eng
Download or read book AASHTO Guide Specifications for LRFD Seismic Bridge Design written by and published by AASHTO. This book was released on 2011 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers guidance on bridge design for extreme events induced by human beings. This document provides the designer with information on the response of concrete bridge columns subjected to blast loads as well as blast-resistant design and detailing guidelines and analytical models of blast load distribution. The content of this guideline should be considered in situations where resisting blast loads is deemed warranted by the owner or designer.
Download or read book Bridge Engineering Handbook Second Edition written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations, and photos. The book covers new, innovative and traditional methods and practices; explores rehabilitation, retrofit, and maintenance; and examines seismic design and building materials. The fourth book, Seismic Design contains 18 chapters, and covers seismic bridge analysis and design. What’s New in the Second Edition: Includes seven new chapters: Seismic Random Response Analysis, Displacement-Based Seismic Design of Bridges, Seismic Design of Thin-Walled Steel and CFT Piers, Seismic Design of Cable-Supported Bridges, and three chapters covering Seismic Design Practice in California, China, and Italy Combines Seismic Retrofit Practice and Seismic Retrofit Technology into one chapter called Seismic Retrofit Technology Rewrites Earthquake Damage to Bridges and Seismic Design of Concrete Bridges chapters Rewrites Seismic Design Philosophies and Performance-Based Design Criteria chapter and retitles it as Seismic Bridge Design Specifications for the United States Revamps Seismic Isolation and Supplemental Energy Dissipation chapter and retitles it as Seismic Isolation Design for Bridges This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.
