Download or read book Dynamics of Rotors and Foundations written by Erwin Krämer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotordynamics are of great importance in the design, manufacture and assembly of turbomachines as well as in ensuring their safe operation. Also important are the dynamics of the foundation and its interaction with the dynamics of the rotor. This book is divided into four parts. Following a presentation of the basic theory the dynamics of rotors supported on several bearings. The third part describes the dynamics of foundations of turbine line-outs and the calculations for a turbomachine coupled with its foundation. The last part includes a section on estimation procedures, a comprehensive presentation of the theoryand practice of rotors having a transverse crack, a section on the mathematical fundamentals and a description of the computer program used for the examples in the book. The book addresses both the practical engineer and the theoretician and should provide manufacturers, operators, university and polytechnic lecturers and students with an understanding of the vibrations of turbomachines. The results are described in such a way that they can be easily understood and applied.

Download or read book Analytical Methods in Rotor Dynamics written by Andrew D. Dimarogonas and published by Springer Science & Business Media. This book was released on 2013-02-19 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and construction of rotating machinery operating at supercritical speeds was, in the 1920s, an event of revolutionary importance for the then new branch of dynamics known as rotor dynamics. In the 1960s, another revolution occurred: In less than a decade, imposed by operational and economic needs, an increase in the power of turbomachinery by one order of magnitude took place. Dynamic analysis of complex rotor forms became a necessity, while the importance of approximate methods for dynamic analysis was stressed. Finally, the emergence of fracture mechanics, as a new branch of applied mechanics, provided analytical tools to investigate crack influence on the dynamic behavior of rotors. The scope of this book is based on all these developments. No topics related to the well-known classical problems are included, rather the book deals exclusively with modern high-power turbomachinery.

Download or read book Dynamics of Rotating Systems written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2007-01-04 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an up-to-date review of rotor dynamics, dealing with basic topics as well as a number of specialized topics usually available only in journal articles Unlike other books on rotordynamics, this treats the entire machine as a system, with the rotor as just one component

Download or read book Rotor Dynamics written by J. S. Rao and published by New Age International. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Revised And Enlarged Edition Of The Book Presents An In-Depth Study Of The Dynamic Behaviour Of Rotating And Reciprocating Machinery. It Evolved Out Of Lectures Delivered At Different Universities Over The Last Two Decades. The Book Deals With Torsional And Bending Vibrations Of Rotors, Stability Aspects, Balancing And Condition Monitoring. Closed Form Solutions Are Given Wherever Possible And Parametric Studies Presented To Give A Clear Understanding Of The Subject. Transfer Matrix Methods Is Extensively Used For General Class Of Rotors For Both Bending And Torsional Vibrations.Special Attentions Are Given To Transient Analysis Of The Rotors Which Is Becoming An Essential Part Of The Design Of High Speed Machinery. Systems With Fluid Film Bearings, Cracked Rotors And Two Spool Rotors Are Also Presented.A First Course On Theory Of Vibration Is A Prerequisite To This Study. Analysis Used Is Fairly Simple, But Sufficiently Advanced To The Requisite Level Of Predicting Practical Observations. As Far As Possible, Practical Examples Are Illustrated, So That The Book Is Also Useful To Practising Engineers.A Special Feature Of This Book Is Diagnostics Of Rotating Machinery Using Vibration Signature Analysis And Application Of Expert Systems To A Field Engineer In Trouble Shooting Work.

Download or read book Dynamics of Rotors written by O. Mahrenholtz and published by Springer. This book was released on 2014-05-04 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rotordynamics written by Agnieszka Muszynska and published by CRC Press. This book was released on 2005-05-20 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the most important parts of rotating machinery, rotors are also the most prone to mechanical vibrations, which may lead to machine failure. Correction is only possible when proper and accurate diagnosis is obtained through understanding of rotor operation and all of the potential malfunctions that may occur. Mathematical modeling, in particular

Download or read book Computational Techniques of Rotor Dynamics with the Finite Element Method written by Arne Vollan and published by CRC Press. This book was released on 2012-03-13 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than a century, we have had a firm grasp on rotor dynamics involving rigid bodies with regular shapes, such as cylinders and shafts. However, to achieve an equally solid understanding of the rotational behavior of flexible bodies—especially those with irregular shapes, such as propeller and turbine blades—we require more modern tools and methods. Computational Techniques of Rotor Dynamics with the Finite Element Method explores the application of practical finite element method (FEM)-based computational techniques and state-of-the-art engineering software. These are used to simulate behavior of rotational structures that enable the function of various types of machinery—from generators and wind turbines to airplane engines and propellers. The book’s first section focuses on the theoretical foundation of rotor dynamics, and the second concentrates on the engineering analysis of rotating structures. The authors explain techniques used in the modeling and computation of the forces involved in the rotational phenomenon. They then demonstrate how to interpret and apply the results to improve fidelity and performance. Coverage includes: Use of FEM to achieve the most accurate computational simulation of all gyroscopic forces occurring in rotational structures Details of highly efficient and accurate computational and numerical techniques for dynamic simulations Interpretation of computational results, which is instrumental to developing stable rotating machinery Practical application examples of rotational structures’ dynamic response to external and internal excitations An FEM case study that illustrates the computational complexities associated with modeling and computation of forces of rotor dynamics Assessment of propellers and turbines that are critical to the transportation and energy industries Useful to practicing engineers and graduate-level students alike, this self-contained volume also serves as an invaluable reference for researchers and instructors in this field. CRC Press Authors Speak Louis Komzsik introduces you to two books that share a common mathematical foundation, the finite element analysis technique. Watch the video.

Download or read book Dynamics of Rotating Machines written by M. I. Friswell and published by Cambridge University Press. This book was released on 2010-03-31 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables engineers to understand the dynamics of rotating machines, from basic explanations to detailed numerical models and analysis.

Download or read book Proceedings of the 9th IFToMM International Conference on Rotor Dynamics written by Paolo Pennacchi and published by Springer. This book was released on 2015-05-26 with total page 2214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 9th IFToMM International Conference on Rotor Dynamics. This conference is a premier global event that brings together specialists from the university and industry sectors worldwide in order to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the dynamics of rotating machinery. The coverage is wide ranging, including, for example, new ideas and trends in various aspects of bearing technologies, issues in the analysis of blade dynamic behavior, condition monitoring of different rotating machines, vibration control, electromechanical and fluid-structure interactions in rotating machinery, rotor dynamics of micro, nano and cryogenic machines, and applications of rotor dynamics in transportation engineering. Since its inception 32 years ago, the IFToMM International Conference on Rotor Dynamics has become an irreplaceable point of reference for those working in the field and this book reflects the high quality and diversity of content that the conference continues to guarantee.

Download or read book Rotordynamics of Turbomachinery written by John M. Vance and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the rotordynamic considerations that are important to the successful design or troubleshooting of a turbomachine. Shows how bearing design, fluid seals, and rotor geometry affect rotordynamic behavior (vibration, shaft whirling, bearing loads, and critical speeds), and describes two successful computational methods for rotordynamic analysis in terms that can be understood by practicing engineers. Gives descriptive accounts of the state of the art in several areas of the field and presents important mathematical or computational concepts, describing equations and formulas in physical terms for better understanding. Also offers tips for troubleshooting unstable machines and provides practical interpretations of vibration measurements.

Download or read book Rotor Systems written by Rajiv Tiwari and published by CRC Press. This book was released on 2017-11-22 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a basic understanding of rotor dynamics phenomena with the help of simple rotor models and subsequently, the modern analysis methods for real life rotor systems. This background will be helpful in the identification of rotor-bearing system parameters and its use in futuristic model-based condition monitoring and, fault diagnostics and prognostics. The book starts with introductory material for finite element methods and moves to linear and non-linear vibrations, continuous systems, vibration measurement techniques, signal processing and error analysis, general identification techniques in engineering systems, and MATLAB analysis of simple rotors. Key Features: • Covers both transfer matrix methods (TMM) and finite element methods (FEM) • Discusses transverse and torsional vibrations • Includes worked examples with simplicity of mathematical background and a modern numerical method approach • Explores the concepts of instability analysis and dynamic balancing • Provides a basic understanding of rotor dynamics phenomena with the help of simple rotor models including modern analysis methods for real life rotor systems.

Download or read book Linear and Nonlinear Rotordynamics written by Yukio Ishida and published by John Wiley & Sons. This book was released on 2013-03-05 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide-ranging treatment of fundamental rotordynamics in order to serve engineers with the necessary knowledge to eliminate various vibration problems. New to this edition are three chapters on highly significant topics: Vibration Suppression - The chapter presents various methods and is a helpful guidance for professional engineers. Magnetic Bearings - The chapter provides fundamental knowledge and enables the reader to realize simple magnetic bearings in the laboratory. Some Practical Rotor Systems - The chapter explains various vibration characteristics of steam turbines and wind turbines. The contents of other chapters on Balancing, Vibrations due to Mechanical Elements, and Cracked Rotors are added to and revised extensively. The authors provide a classification of rotating shaft systems and general coverage of key ideas common to all branches of rotordynamics. They offers a unique analysis of dynamical problems, such as nonlinear rotordynamics, self-excited vibration, nonstationary vibration, and flow-induced oscillations. Nonlinear resonances are discussed in detail, as well as methods for shaft stability and various theoretical derivations and computational methods for analyzing rotors to determine and correct vibrations. This edition also includes case studies and problems.

Download or read book Vibration Analysis of Rotors written by Chong-Won Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is intended for use as an advanced course in either rotordynamics or vibration at the graduate level. This text has mostly grown out of the research work in my laboratory and the lectures given to graduate students in the Mechanical Engineering Department, KAIST. The text contains a variety of topics not normally found in rotordynamics or vibration textbooks. The text emphasizes the analytical aspects and is thus quite different from conventional rotordynamics texts; potential readers are expected to have a firm background in elementary rotordynamics and vibration. In most previously published rotordynamics texts, the behavior of simple rotors has been of a primary concern, while more realistic, multi-degree-f-freedom or continuous systems are seldom treated in a rigorous way, mostly due to the difficulty of a mathematical treatment of such complicated systems. When one wanted to gain a deep insight into dynamic phenomena of complicated rotor systems, one has, in the past, either had to rely on computational techniques, such as the transfer matrix and finite element methods, or cautiously to extend ideas learned from simple rotors whose analytical solutions are readily available. The former methods are limited in the interpretation of results, since the calculations relate only to the simulated case, not to more general system behavior. Ideas learned from simple rotors can, fortunately, often be extended to many practical rotor systems, but there is of course no guarantee of their validity.

Download or read book Introduction to Dynamics of Rotor bearing Systems written by Wen Jeng Chen and published by Trafford on Demand Pub. This book was released on 2007 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written as an introduction to rotor-bearing dynamics for practicing engineers and students who are involved in rotordynamics and bearing design. The goal of this book is to provide a step-by-step approach to the understanding of fundamentals of rotor-bearing dynamics by using DyRoBeS(c) . Therefore, the emphasis of this book is on the basic principals, phenomena, modeling, and interpretation of the results. Numerous examples, from a single-degree-of-freedom system to complicated industrial rotating machinery, are employed throughout this book to illustrate these fundamental dynamic behaviors. The concepts in the text are reinforced by parametric studies and numerous illustrative examples and figures. The book begins with a brief discussion of the mathematical modeling of physical dynamic systems and an overview of the basic vibration concepts in Chapter 1. The coordinate systems and the kinematics of the rotor motion are presented in Chapter 2. A simple two-degrees-of-freedom rotor system, the Laval-Jeffcott rotor model, is utilized in Chapter 3 to demonstrate many important phenomena in rotordynamics. This simple 2DOF model provides many valuable physical insights into more practical and complicated systems. Chapter 4 discusses the rotating disk equations and rigid rotor dynamics. Chapter 5 covers the finite element formulation for a rotating shaft element. Chapter 6 deals with various types of bearings, dampers, seals and other interconnection components. All the reaction forces from these components are non-linear in nature. The concept of linearization around the static equilibrium is discussed. Chapter 7 summarizes the lateral vibration study with several practical examples. Various solution techniques and interpretation of the results are discussed. Chapter 8 is devoted to the important subject of torsional vibration. Finally, a brief description of the balancing method, influence coefficient method is presented in Chapter 9.

Download or read book Handbook of Rotordynamics written by Fredric F. Ehrich and published by . This book was released on 1999 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This iteration adds some 50 tables and figures, reflecting new devices and phenomena since the 1992 edition, particularly in the design of rotating machinery. Four chapters cover vibration considerations in design; analytic prediction of rotordynamic response; and balancing of flexible.

Download or read book The Dynamics of Rotor Bearing Systems written by M. Goodwin and published by Springer. This book was released on 1989-10-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Compression Machinery for Oil and Gas written by Klaus Brun and published by Gulf Professional Publishing. This book was released on 2018-11-30 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compression Machinery for Oil and Gas is the go-to source for all oil and gas compressors across the industry spectrum. Covering multiple topics from start to finish, this reference gives a complete guide to technology developments and their applications and implementation, including research trends. Including information on relevant standards and developments in subsea and downhole compression, this book aids engineers with a handy, single resource that will help them stay up-to-date on the compressors needed for today's oil and gas applications. Provides an overview of the latest technology, along with a detailed discussion of engineering Delivers on the efficiency, range and limit estimations for machines Pulls together multiple contributors to balance content from both academics and corporate research