Download or read book Dynamics of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph represents the first book of the series entitled "SCI ENTIFIC FUNDAMENTALS OF ROBOTICS". The aim of this monograph is to ap proach the dynamics of active mechanisms from the standpoint of its application to the synthesis of complex motion and computer-aided de sign of manipulation mechanisms with some optimal performances. The rapid development of a new class of mechanisms, which may be referred to as active mechanisms, contributed to their application in various environments (from underwater to cosmic) . Because of some specific fea tures, these mechanisms require very careful description, both in a mechanical sense (kinematic and dynamic) and in the synthesis of algo rithms for precise tracking of the above motion under insufficiently defined operating conditions. Having also in mind the need for a very fast (even real-time) calculation of system dynamics and for eliminating, in principle, the errors made when forming mathematical models "by hand" this monograph will primarily present methods for automatic for mUlation of dynamic equations of motion of active spatial mechanisms. Apart from these computer-oriented methods, mention will be made of all those methods which have preceded the computer-oriented procedures, predominantly developed for different problems of rigid body dynamics. If we wish to systematically establish the origins of the scientific discipline, which could be called robot dynamics, we must recall some groups and individuals, who, by solving actual problems in the synthe sis and control of artificial motion, have contributed to a gradual formation of this discipline.
Download or read book Mechanics of Robotic Manipulation written by Matthew T. Mason and published by MIT Press. This book was released on 2001-06-08 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and engineering of robotic manipulation. "Manipulation" refers to a variety of physical changes made to the world around us. Mechanics of Robotic Manipulation addresses one form of robotic manipulation, moving objects, and the various processes involved—grasping, carrying, pushing, dropping, throwing, and so on. Unlike most books on the subject, it focuses on manipulation rather than manipulators. This attention to processes rather than devices allows a more fundamental approach, leading to results that apply to a broad range of devices, not just robotic arms. The book draws both on classical mechanics and on classical planning, which introduces the element of imperfect information. The book does not propose a specific solution to the problem of manipulation, but rather outlines a path of inquiry.
Download or read book Real Time Dynamics of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth book from the Series "Scientific Fundamentals of Ro botics". The first two volumes have established abackqround for studying the dynamics and control of robots. While the first book was exclusive ly devoted to the dynamics of active spatial mechanisms, the second treated the problems of the dynamic control of manipulation robots. In contrast to the first two books, where recursive computer-aided me thods for setting robot dynamic equations where described, this mono graph presents a new approach to the formation of robot dynamics. The goal is to achieve the real-time model computation using up-to-date mi crocomputers. The presented concept could be called a numeric-symbolic, or analytic, approach to robot modelling. It will be shown that the generation of analytical robot model may give new excellent possibili ties concerning real-time applications. It is of essential importance in synthesizing the algorithms for nonadaptive and adaptive control of manipulation robots. If should be pointed out that the high computational efficiency has been achieved by off-line computer-aided preparation of robot equations. The parameters of a specified robot must be given in advance. This, af ter each significant variation in robot structure (geometrical and dy namical parameters) ,we must repeat the off-line stage. Thus is why the numerical procedures will always have their place in studying the dy namic properties of robotic systems. This monograph is organized in 5 chapters.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Applied Dynamics of Manipulation Robots written by Miomir Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the period 1982-1985, six books of the series: Scientific Fun damentals of Robotics were published by Springer-Verlag. In chronolo gical order these were: Dynamics of Manipulation Robots: Theory and Application, by M. Vukobra tovic and V. Potkonjak, Control of Manipulation Robots: Theory and Ap plication, by M. vukobratovic and D. Stokic, Kinematics and Trajectory Synthesis of Manipulation Robots, by M. Vukobratovic and H. Kircanski, Real-Time Dynamics of Hanipulation Robots by M. Vukobratovic and N. Kircanski, Non-Adaptive and Adaptive Control of Manipulation Robots, by M. Vukobratovic, D. Stokic and N. Kircanski and Computer-Aided De sign and Applied Dynamics of Manipulation Robots, by M. Vukobratovic and V. Potkonjak. Within the series, during 1989, two monographs dealing with new sub jects will be published. So far, amongst the published monographs, Vol. 1 has been translated into Japanese, Volumes 2 and 5 into Russian, and Volumes 1-6 will appear in Chinese and Hungarian. In the author's opinion, the afore mentioned monographs, in principle, cover with sufficient breadth, the topics devoted to the design of ro bots and their control systems, at the level of post-graduate study in robotics. However, if this material was also to apply to the study of robotics at under-graduate level, it would have to be modified so as to obtain the character of a textbook. With this in mind, it must be noted that the subject matter contained in the text cannot be simpli fied but can only be elaborated in more detail.
Download or read book Kinematics and Trajectory Synthesis of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: A few words about the series "Scientific Fundamentals of Robotics" should be said on the occasion of publication of the present monograph. This six-volume series has been conceived so as to allow the readers to master a contemporary approach to the construction and synthesis of con trol for manipulation ~obots. The authors' idea was to show how to use correct mathematical models of the dynamics of active spatial mecha nisms for dynamic analysis of robotic systems, optimal design of their mechanical parts based on the accepted criteria and imposed constraints, optimal choice of actuators, synthesis of dynamic control algorithms and their microcomputer implementation. In authors' oppinion this idea has been relatively successfully realized within the six-volume mono graphic series. Let us remind the readers of the books of this series. Volumes 1 and 2 are devoted to the dynamics and control algorithms of manipulation ro bots, respectively. They form the first part of the series which has a certain topic-related autonomy in the domain of the construction and application of the mathematical models of robotic mechanisms' dynamics.
Download or read book Dynamics of Manipulation Robots written by M. Vukobratovic and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Robot Manipulators written by Richard P. Paul and published by Richard Paul. This book was released on 1981 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous transformations; Kinematic equations; Solving kinematic equations; Differential relationships; Motion trajectories; Dynamics; Control; Static forces; Compliance; Programming.
Download or read book Applied Dynamics and CAD of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a logical continuation of Volume 1 of the series entitled "Scientific Fundamentals of Robotics" which presents all of the basic methods for computerized construction of dynamics of manipulation ro bots as well as the essential concepts of computer-aided design of their mechanics. Vol. 1 of the Series also contains the main practical re sults from the elastodynamics of manipulation robots, having in mind a need for forming a computer procedure which allows efficient checks of elastic deformations of a manipulator tip or some other of its charac teristic points. Wishing to add a highly applications-oriented dimension to the dynamic aspect of studies of manipulation robots, the authors have made a kind of a topic-based selection by leaving unconsidered some aspects of studies of robots, such as elasticity, and discussing others, more im portant in their opinion, to such an extent as suffices to make them practically applicable. The authors have decided not to treat in detail the problem of flexible manipulation robots for two reasons. The first results from the atti tude that the permissible (desired) robot elasticity may, satisfacto rily well, be tested using the method described in Vol. 1 of the Series.
Download or read book Control of Manipulation Robots written by M. Vukobratovic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph represents the second book of the series entitled: "SCI ENTIFIC FUNDAl-1ENTALS OF ROBOTICS". While the first volume provides a study of the dynamics of spatial mechanisms and its application to the design of these mechanisms, the present one focuses on the synthesis -of control based~n the knowledge of dynamic models (presented in de tail in the first_ volume). In this way a logical continuity is formed in which one may easily recognize a "dynamic" approach to the design of manipulation r-obots and the synthesis of control algorithms based on exact mathematical models of dynamics of open spatial mechanisms. When writing the monograph, the authors had the following objective: to prove that a study of dynamic properties of manipulation mechanisms is justifiable, to use the dynamic properties in the synthesis of con trol algorithms, and to determine, from one case to another, a proper measure of dynamics depending on the type of manipulation task, the "v$!locity at which "it is carried out, and on the type of the manipu- tion mechanisms itself. The authors believe they have thus made the study of dynamics,' aimed at synthesizing algorithms for dynamic con trol, free from unnecessary academicism and allowed the readers to apply all the results presented here to practical purposes of manipu lator design in thfil broader sense of the word. At this point, the au thors would like to present some concepts which were their guidelines in preparing this text.
Download or read book Learning for Adaptive and Reactive Robot Control written by Aude Billard and published by MIT Press. This book was released on 2022-02-08 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods by which robots can learn control laws that enable real-time reactivity using dynamical systems; with applications and exercises. This book presents a wealth of machine learning techniques to make the control of robots more flexible and safe when interacting with humans. It introduces a set of control laws that enable reactivity using dynamical systems, a widely used method for solving motion-planning problems in robotics. These control approaches can replan in milliseconds to adapt to new environmental constraints and offer safe and compliant control of forces in contact. The techniques offer theoretical advantages, including convergence to a goal, non-penetration of obstacles, and passivity. The coverage of learning begins with low-level control parameters and progresses to higher-level competencies composed of combinations of skills. Learning for Adaptive and Reactive Robot Control is designed for graduate-level courses in robotics, with chapters that proceed from fundamentals to more advanced content. Techniques covered include learning from demonstration, optimization, and reinforcement learning, and using dynamical systems in learning control laws, trajectory planning, and methods for compliant and force control . Features for teaching in each chapter: applications, which range from arm manipulators to whole-body control of humanoid robots; pencil-and-paper and programming exercises; lecture videos, slides, and MATLAB code examples available on the author’s website . an eTextbook platform website offering protected material[EPS2] for instructors including solutions.
Download or read book Fundamentals of Mechanics of Robotic Manipulation written by Marco Ceccarelli and published by Springer Nature. This book was released on 2022-03-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the fundamental issues of robot mechanics for both the analysis and design of manipulations, manipulators and grippers, taking into account a central role of mechanics and mechanical structures in the development and use of robotic systems with mechatronic design. It examines manipulations that can be performed by robotic manipulators. The contents of the book are kept at a fairly practical level with the aim to teach how to model, simulate, and operate robotic mechanical systems. The chapters have been written and organized in a way that they can be red even separately, so that they can be used separately for different courses and purposes. The introduction illustrates motivations and historical developments of robotic mechanical systems. Chapter 2 describes the analysis and design of manipulations by automatic machinery and robots; chapter 3 deals with the mechanics of serial-chain manipulators with the aim to propose algorithms for analysis, simulation, and design purposes; chapter 4 introduces the mechanics of parallel manipulators; chapter 5 addresses the attention to mechanical grippers and related mechanics of grasping.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.
Download or read book Robot Force Control written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.
Download or read book Aerial Robotic Manipulation written by Anibal Ollero and published by Springer. This book was released on 2019-06-27 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robotic manipulation integrates concepts and technologies coming from unmanned aerial systems and robotics manipulation. It includes not only kinematic, dynamics, aerodynamics and control but also perception, planning, design aspects, mechatronics and cooperation between several aerial robotics manipulators. All these topics are considered in this book in which the main research and development approaches in aerial robotic manipulation are presented, including the description of relevant systems. In addition of the research aspects, the book also includes the deployment of real systems both indoors and outdoors, which is a relevant characteristic of the book because most results of aerial robotic manipulation have been validated only indoor using motion tracking systems. Moreover, the book presents two relevant applications: structure assembly and inspection and maintenance, which has started to be applied in the industry. The Chapters of the book will present results of two main European Robotics Projects in aerial robotics manipulation: FP7 ARCAS and H2020 AEROARMS. FP7 ARCAS defined the basic concepts on aerial robotic manipulation, including cooperative manipulation. The H2020 AEROARMS on aerial robot with multiple arms and advanced manipulation capabilities for inspection and maintenance has two general objectives: (1) development of advanced aerial robotic manipulation methods and technologies, including manipulation with dual arms and multi-directional thrusters aerial platforms; and (2) application to the inspection and maintenance.
